Product Information

58247-1

58247-1 electronic component of TE Connectivity

Datasheet
Terminating Head for MTA-156 Closed End Receptacle Connectors. Used with 58074-1 (Manual) or 58075-1 (Pneumatic) Pistol Grip Handle

Manufacturer: TE Connectivity
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 289.9725 ea
Line Total: USD 289.9725

56 - Global Stock
Ships to you between
Thu. 11 Apr to Mon. 15 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
61 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 329.9125
3 : USD 316.6
5 : USD 310.3875
10 : USD 304.3
15 : USD 302.7875

16 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 396.7353
25 : USD 352.6536
50 : USD 330.6127
100 : USD 308.5719

56 - Global Stock


Ships to you between Thu. 11 Apr to Mon. 15 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 289.9725
5 : USD 285.2115
10 : USD 275.701
25 : USD 266.2135
50 : USD 265.811
100 : USD 265.811
250 : USD 265.811
500 : USD 259.4055

1 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 503.178

55 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 369.9493
2 : USD 360.2913
3 : USD 358.5004
10 : USD 351.3304

1 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 712.5418

13 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58247-1
TE Connectivity

1 : USD 464
2 : USD 404.5
3 : USD 384.775
5 : USD 366.875

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
For Use With
Series
Brand
Cnhts
Hts Code
Mxhts
Product Type
Factory Pack Quantity :
Subcategory
Taric
Tradename
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
58247-3 electronic component of TE Connectivity 58247-3

Crimpers / Crimping Tools CENTERLINE HEAD MTA 156
Stock : 15

5-825433-0 electronic component of TE Connectivity 5-825433-0

Headers & Wire Housings 50P SINGLE ROW
Stock : 987

5-825437-0 electronic component of TE Connectivity 5-825437-0

Headers & Wire Housings MODU 2 PIN HEADER
Stock : 4008

582501-1 electronic component of TE Connectivity 582501-1

Standard Card Edge Connectors KEY PLUG
Stock : 49

5-825438-0 electronic component of TE Connectivity 5-825438-0

Headers & Wire Housings MOD 2 PIN HEADER
Stock : 2400

5-825492-0 electronic component of TE Connectivity 5-825492-0

Headers & Wire Housings MOD 2 PIN HEADER 50
Stock : 90

5-825457-0 electronic component of TE Connectivity 5-825457-0

Connector Header Through Hole, Right Angle 100 position 0.100" (2.54mm)
Stock : 0

5-825440-0 electronic component of TE Connectivity 5-825440-0

Connector Header Through Hole 100 position 0.100" (2.54mm)
Stock : 1498

58247-2 electronic component of TE Connectivity 58247-2

Hand Tools HEAD (IDC) MTA 156
Stock : 0

582527-000 electronic component of TE Connectivity 582527-000

Sealing Grommet for MIL-C-38999 Connector Size 8 Cavity
Stock : 0

Image Description
58495-1 electronic component of TE Connectivity 58495-1

Crimp Tool - Ratchet - AMP 28-16AWG Contacts.
Stock : 97

58530-1 electronic component of TE Connectivity 58530-1

Crimpers / Crimping Tools PRO-CRIMPER 12-10
Stock : 30

58531-2 electronic component of TE Connectivity 58531-2

Crimpers 75 OHM PRO CRIMPER
Stock : 5

58535-1 electronic component of TE Connectivity 58535-1

Crimpers / Crimping Tools PRO-CRIMPER ASSY MODU/MODII
Stock : 5

58560-1 electronic component of TE Connectivity 58560-1

Crimpers 10P CRIMP TOOL FOR MOD PLUGS
Stock : 0

58583-1 electronic component of TE Connectivity 58583-1

Crimpers / Crimping Tools PROCRIMP HT&D SUPRSE
Stock : 23

58641-1 electronic component of TE Connectivity 58641-1

Crimpers / Crimping Tools COMM. CRIMP TOOL 26-22 AWG
Stock : 15

551379-4 electronic component of TE Connectivity 551379-4

Crimpers / Crimping Tools ANVIL
Stock : 0

600850 electronic component of TE Connectivity 600850

Crimpers ROTO-CRIMP TOOL
Stock : 5

601966-4 electronic component of TE Connectivity 601966-4

TE Connectivity AMP Crimpers SKT POSITIONER
Stock : 2

Instruction Sheet TerminatingHead58247-1 ForMTA-156ReceptacleConnectors 408--6930 UsingDiscreteWire 19APR 11 RevF Locating Wire Mass Termination Assembly (MTA)--156 Pawl Inserter Insulation Displacement Contact (IDC) Closed--End Receptacle Connectors Feed Slide Tool Base With Lock Without Lock With Lock, Without Lock, (Ramp) (Ramp) With Polarizing With Polarizing Adjuster Tabs Tabs (Insertion Rod) Figure 1 Wire Inserter forces the wire into the two slotted 1. INTRODUCTION beams of the contact. Note that it provides support for Terminating Head 58247--1 (shown in Figure 1) is the contact beams when applying insertion force on designed to terminate discrete wire in MTA--156 IDC the wire. closed--end receptacle connectors with or without lock Adjuster (Insertion Rod) is a piston for the wire (ramp) and with or without polarizing tabs. Slotted inserter and regulates wire inserter travel. contacts for insulation displacement termination are pre--assembled on 3.96--mm .156--in. centerlines in Feed Slide automatically positions the connector each color--coded housing for a specific wire size. after each termination. Locating Pawl (or Anti--Backup Pawl) aligns the The head must be installed in Pistol Grip Manual Handle Assembly 58074--1 or Pistol Grip Pneumatic connector for insertion, and retains it during Handle Assembly 58075--1. For head installation and termination. removal, refer to Instruction Sheet 408--6790 for the manual handle assembly and 408--6789 for the 3. SETUPANDTESTINSPECTION pneumatic handle assembly. The adjuster (insertion rod) is preset for wire sizes 26 through 18 AWG. If the wire is being inserted too For detailed connector description and application deeply or not deeply enough inside the contact, it may requirements, refer to Application Specification be necessary to adjust the depth of the wire inserter 114--1020. or, in addition, if the pneumatic handle assembly is Read these and all referenced instructions thoroughly being used, it may be necessary to adjust the air pressure. Proceed as follows: before using the head. 3.1. Setup All numerical values in this instruction sheet are NOTE in metric units with U.S. customary units in 1. Determine the wire size, and select the brackets . Dimensions are in millimeters and appropriate color--coded connector from Figure 2. i inches . Figures are not drawn to scale. WIRESIZE(AWG) CONNECTORCOLORCODE Reasons for reissue of this instruction sheet are 26 Blue provided in Section 8, REVISION SUMMARY. 24 Natural 22 Red 2. DESCRIPTION 20 Yellow The head serves as a guide and support for the 18 Orange connector during termination. Features of the head (shown in Figure 1) and their function are as follows. Figure 2 E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change. 1 of 5 All Rights Reserved PRODUCT INFORMATION 1--800--522--6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOCB TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners. ORIGINAL INSTRUCTIONS408-6930 2. Using a small knife, cut off the wire retainers For the pneumatic handle assembly, if the wire is (strain relief) of the connector. This will provide a inserted too deeply (more than the required wire clear view for inspecting the connector for a insertion depth), refer to Section 4, WIRE properly terminated wire in the contact. See INSERTION DEPTH ADJUSTMENT. If the wire is Figure 3. not inserted deeply enough (less than the required wire insertion depth), increase the air pressure by Wire retainers are removed in a connector for CAUTION 69 kPa 10 psi . Repeat the termination procedure testing only. DO NOT use such connectors for and check the insertion depth. Continue in this production application. manner until either the proper insertion depth is obtained or the air pressure is set to 483 kPa 70 psi . If the proper insertion depth is NOT 3. Make a test termination according to Steps 1 reached at 483 kPa 70 psi , return the air pressure through 5 of Section 5, TERMINATING to 276 kPa 40 psi , and refer to Section 4. PROCEDURE. 6. Inspect the termination according to 4. Push the connector out of the right side of the Paragraph 3.2. head. 5. Check that the wire insertion depth is within the 3.2. TerminationInspection (Refer to Figure 3) dimension given in Figure 3. Refer to 114--1020 for detailed explanation of the NOTE To obtain the wire insertion depth, measure from NOTE termination inspection requirements. the front of the contact beam to the center of the i wire as shown in Figure 3 -- or -- measure from i the front of the contact beam to the back of the wire and subtract the wire diameter divided by 2. 1 The required wire insertion depth is within the dimension given in Figure 3 (refer to Step 5 of If it is not, proceed as follows: Paragraph 3.1 for measurement). For the manual handle assembly, refer to Section 4, WIRE INSERTION DEPTH 2 The end of the wire extends past the contact ADJUSTMENT. beam by at least 1.52 mm .060 in Termination Inspection Test Connector Production Connector Contact (Partially Removed) 5 Wire Wire Extends Past Wire Wire Insulation Retainer (Strain Relief) Not Nicked or Cut 4 Lock (Ramp, Ref) Wire Retainer (Strain Relief) Removed 1 2 3 Contact Beams 2.41+0.46/--0.13 mm .095+.018/--.005 in. 1.52 mm .060 in. Min Not Deformed Wire Insertion Depth End of Wire Extends Past (Front of Contact Beam to Center of Wire) Contact Beam Figure 3 2 of 5 Rev F

Tariff Desc

8203.20 TOOLS, crimping, but NOT including crimping tools put up in packs containing electrical connectors Op. 27.05.1985 Dec. 27.05.1985 - TC 8532098
AGASTAT - TE CONNECTIVITY
ALCOSWITCH - TE CONNECTIVITY
Alpha Sensors
AMP - TE CONNECTIVITY
AMP FROM TE CONNECTIVITY
AMP/TYCO
AUGAT - TE CONNECTIVITY
AXICOM - TE CONNECTIVITY
AXIOHM
AXIOHM / TXCOM
BUCHANAN - TE CONNECTIVITY
CGS - TE CONNECTIVITY
CII - TE CONNECTIVITY
CITEC - TE CONNECTIVITY
CORCOM - TE CONNECTIVITY
CROMPTON - TE CONNECTIVITY
Deutsch
Deutsch Group
DEUTSCH UK
ELCON - TE CONNECTIVITY
Entrelec
ENTRELEC - TE CONNECTIVITY
ENTRELEC UK
ERNI
ERNI COMPONENTS
ERNI Elec
ERNI ELECTRONICS
GREENPAR - TE CONNECTIVITY
HOLSWORTHY - TE CONNECTIVITY
HTS - TE CONNECTIVITY
HUM
Kemtron
KILOVAC-TE CONNECTIVITY
Laird External Antennas
LUCENT TECH / TYCO
MADISON CABLE / TE
MADISONCABLE - TE CONNECTIVITY
Measurement Specialties
Measurement Specialties Inc.
Measurement Specialties, Inc.
NEOHM
NEOHM - TE CONNECTIVITY
OEG - TE CONNECTIVITY
PLM
Polamco
POLAMCO - TE CONNECTIVITY
POTTER&BRUMFIELD - TE CONNECTIVITY
PRODUCTSUNLIMITED - TE CONNECTIVITY
RAYCHEM
RAYCHEM - TE CONNECTIVITY
RAYCHEM RPG
RYC
SCHRACK
SCHRACK - TE CONNECTIVITY
SENSOR SOLUTIONS - TE CONNECTIVITY
SIGMA
SIGMAINDUCTORS - TE CONNECTIVITY
TE
TE Application Tooling
TE CONNECTIVITY
TE Connectivity ADC
TE Connectivity Agastat
TE Connectivity Alcoswitch
TE Connectivity AMP
TE Connectivity Axicom
TE Connectivity Buchanan
TE Connectivity CGS
TE Connectivity CII
TE Connectivity Citec
TE Connectivity CO-EV
TE Connectivity Corcom
TE Connectivity DEUTSCH
TE Connectivity Hartman
TE Connectivity Holsworthy
TE Connectivity Kilovac
TE Connectivity Madison
TE Connectivity Nanonics
TE Connectivity Neohm
TE Connectivity OEG
TE Connectivity P&B
TE Connectivity Products Unlimited
TE Connectivity Q-Cees
TE Connectivity Raychem
TE Connectivity Schrack
TE Connectivity Sigma Inductors
TE Connectivity / ABB Entrelec
TE Connectivity / Agastat
TE Connectivity / Agastat Brand
TE Connectivity / Alcoswitch
TE Connectivity / Alcoswitch Brand
TE Connectivity / AMP
TE Connectivity / AMP Asia
TE Connectivity / AMP Brand
TE CONNECTIVITY / AUGAT
TE Connectivity / Axicom
TE Connectivity / Buchanan
TE Connectivity / Buchanan Brand
TE Connectivity / CGS
TE Connectivity / CGS Brand
TE Connectivity / Chip Coolers Brand
TE Connectivity / CII
TE Connectivity / CII Brand
TE CONNECTIVITY / CITEC
TE Connectivity / Citec Brand
TE Connectivity / CO-EV
TE Connectivity / CoEv Magnetics Brand
TE Connectivity / Corcom
TE Connectivity / Corcom Brand
TE Connectivity / Critchley Brand
TE CONNECTIVITY / CROMPTON
TE Connectivity / DEUTSCH
TE CONNECTIVITY / DEUTSCH AUTOMOTIVE
TE CONNECTIVITY / ELCON
TE Connectivity / Elcon Brand
TE Connectivity / Energy
TE CONNECTIVITY / ENERGY DIVISION
TE Connectivity / Entrelec
TE Connectivity / ERNI
TE CONNECTIVITY / GREENPAR
TE Connectivity / Hartman
TE Connectivity / Hartman Brand
TE Connectivity / Hirschmann
TE Connectivity / Holsworthy
TE Connectivity / Holsworthy Brand
TE CONNECTIVITY / HTS
TE Connectivity / Intercontec
TE Connectivity / Kemtron
TE Connectivity / Kilovac
TE Connectivity / Kilovac Asia
TE Connectivity / Kilovac Brand
TE Connectivity / Kissling
TE Connectivity / Laird External Antennas
TE Connectivity / Linx Technologies
TE Connectivity / Madison
TE CONNECTIVITY / MADISON CABLE
TE CONNECTIVITY / MICRODOT
TE Connectivity / Microdot Brand
TE Connectivity / Midtex
TE Connectivity / Midtex Brand
TE Connectivity / Nanonics
TE Connectivity / Nanonics Brand
TE Connectivity / Neohm
TE Connectivity / Neohm Brand
TE Connectivity / OEG
TE Connectivity / OEG Brand
TE Connectivity / P&B
TE Connectivity / P&B Brand
TE Connectivity / Polamco
TE CONNECTIVITY / POTTER & BRUMFIELD
TE CONNECTIVITY / POTTER-BRUMFIELD
TE CONNECTIVITY / PRODUCTS UNLIMITED
TE Connectivity / Products Unlimited Brand
TE Connectivity / Q-Cees
TE Connectivity / Raychem
TE Connectivity / Raychem Brand
TE Connectivity / Schrack
TE Connectivity / Schrack Brand
TE Connectivity / Sensor
TE Connectivity / Sigma Inductors
TE Connectivity / TE Deutsch ICT
TE Connectivity /CGS Brand
TE Connectivity Aerospace, Defense and Marine
TE Connectivity Alcoswitch Switches
TE Connectivity AMP Connectors
TE Connectivity Corcom Filters
TE Connectivity Deutsch Connectors
TE Connectivity Divested
TE Connectivity Energy
TE Connectivity Measurement Specialties
TE Connectivity Passive Product
TE Connectivity Potter & Brumfield Relays
TE Connectivity Raychem Cable Protection
TE Connectivity Raychem Circuit Protection
TE CONNECTIVITY SENSORS
TE CONNECTIVITY/ CHIPS COOLERS BRAND
TE CONNECTIVITY/ CII BRAND
TE CONNECTIVITY/ABB ENTRELEC
TE Connectivity/Agastat Brand
TE Connectivity/Amp Brand
TE Connectivity/COEV Magnetics
TE CONNECTIVITY/DEUTSCH
TE Connectivity/Kilovac Brand
TE Connectivity/Madison Cable
TE CONNECTIVITY/PRODUCTS UNL
TE Connectivity/Sigma Inductors
TE SENSOR SOLUTIONS
TEConnectivity
TEConnectivity/AMP
TES
TYC
Tyco
TYCO AMP
Tyco Electronics
Tyco Lucent Tech
TYCO POWER SYSTEMS
TYCO TB
TYCO/CHIPCOOLERS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted