Product Information

58546-1

58546-1 electronic component of TE Connectivity

Datasheet
Crimp Tool - Ratchet - AMP SOLISTRAND 22-10AWG Terminals and Splices - Te Connectivity / Amp 585.

Manufacturer: TE Connectivity
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 355.212 ea
Line Total: USD 355.212

11 - Global Stock
Ships to you between
Thu. 11 Apr to Mon. 15 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
15 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58546-1
TE Connectivity

1 : USD 390.0625
3 : USD 372.7625
5 : USD 363.2625
10 : USD 353.8875
15 : USD 352.125

11 - Global Stock


Ships to you between Thu. 11 Apr to Mon. 15 Apr

MOQ : 1
Multiples : 1

Stock Image

58546-1
TE Connectivity

1 : USD 355.212
5 : USD 345.391
10 : USD 340.86
60 : USD 340.86
100 : USD 340.86
260 : USD 340.86
500 : USD 340.86
1000 : USD 340.86

14 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58546-1
TE Connectivity

1 : USD 432.9708
2 : USD 419.0027
3 : USD 410.6227

1 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

58546-1
TE Connectivity

1 : USD 599.4
2 : USD 563.625

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
Description/Function
Brand
Factory Pack Quantity :
Cnhts
Hts Code
Product Type
Subcategory
Taric
Tradename
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
58548-2 electronic component of TE Connectivity 58548-2

Punches & Dies DIE ASSEMBLY
Stock : 4

58551-1 electronic component of TE Connectivity 58551-1

Crimpers / Crimping Tools PRO-CRIMPER
Stock : 1

58552-1 electronic component of TE Connectivity 58552-1

TE Connectivity AMP Punches & Dies QUAD HEX DIE SET
Stock : 7

585569-000 electronic component of TE Connectivity 585569-000

Circular MIL Spec Strain Reliefs & Adapters TXR40AB90-1612BI
Stock : 2

5-854830-4 electronic component of TE Connectivity 5-854830-4

Crimpers CRIMPER INS SP(.100 OV)
Stock : 0

58560-1 electronic component of TE Connectivity 58560-1

Crimpers 10P CRIMP TOOL FOR MOD PLUGS
Stock : 0

58548-1 electronic component of TE Connectivity 58548-1

PRO-CRIMPER HAND TOOL & DIE
Stock : 3

58558-2 electronic component of TE Connectivity 58558-2

Punches & Dies CONSUMER BNC DIE SET RG 58/59
Stock : 0

58558-1 electronic component of TE Connectivity 58558-1

Crimpers / Crimping Tools CONSUMER BNC TOOL RG 58/59
Stock : 1

5-854830-6 electronic component of TE Connectivity 5-854830-6

Bench Top Tools CRIMPER INSULATION SPECIAL
Stock : 0

Image Description
58531-1 electronic component of TE Connectivity 58531-1

Crimpers / Crimping Tools PRO CRIMPER 75 OHM
Stock : 3

58522-1 electronic component of TE Connectivity 58522-1

Crimpers / Crimping Tools TOOL & DIE PRO-CRIMPER II
Stock : 3

58517-3 electronic component of TE Connectivity 58517-3

Crimpers / Crimping Tools PRO CRIMP TOOL W.DIE SET
Stock : 10

Hot 58517-1 electronic component of TE Connectivity 58517-1

Hand Tool Assembly And Die Assembly
Stock : 6

58515-1 electronic component of TE Connectivity 58515-1

Crimpers / Crimping Tools LOCATOR SUBASSEMBLY
Stock : 0

58514-1 electronic component of TE Connectivity 58514-1

Crimpers / Crimping Tools CRIMPER W/DIE SET 58514-2
Stock : 2

58499-1 electronic component of TE Connectivity 58499-1

Crimpers AMP PRO-CRIMPER ASSE
Stock : 5

58448-2 electronic component of TE Connectivity 58448-2

Hand Crimper Tool Circular and D-Sub Contacts
Stock : 0

58433-3 electronic component of TE Connectivity 58433-3

Hand Crimper Tool Splices and Terminals
Stock : 3

58433-2 electronic component of TE Connectivity 58433-2

TE Connectivity AMP Crimpers 50 BNC CRIMP WDIE
Stock : 8

Instruction Sheet PRO-CRIMPER*III HandToolAssembly58546-1 408--4047 withDieAssembly58545-1 28 APR 11 RevG PROPERUSEGUIDELINES CumulativeTraumaDisorderscanresultfromtheprolongeduseofmanuallypoweredhandtools.Handtoolsareintendedforoccasionaluseandlowvolume applications.Awide selection ofpowered application equipmentforextended--use,production operationsisavailable. Stationary Jaw Back of Tool Front of Tool (Wire Side) Pivot Pin Die Assembly PRO--CRIMPER III Hand Tool Frame 354940--1 (See Instruction Sheet 408--9930) Moving Jaw Ratchet Adjustment Wheel The PRO--CRIMPER IIIHand Tool isa Commercialgrade tool and is designed primarilyforfield installation,repair,maintenance work,or Stationary prototyping in industrial,commercial,orinstitutional applications.Product Handle crimped with thistool will meetthe crimp heightrequirementforhand toolsin the appropriate 114 application specification,butmaynotcomplywith other feature parametersofthe specification.TEConnectivityoffersa varietyoftools Moving to satisfyyourperformance requirements.Foradditional information,contact Handle the Tooling Assistance Centerat1--800--722--1111. WIRE PPRROODUCTDUCT DIEASSEMBLY SIZE STRIPLENGTH FAMILY (AWG) (mm in. ) 58545--1 SOLISTRAND* Butt Splice 22--10 6.35--7.14 .250--.281 Contact the Tooling Assistance Center at the number listed below for specific splice part numbers. Figure 1 Dimensions on this sheet are in millimeters with 1. INTRODUCTION NOTE inch equivalents provided in brackets . Figures PRO--CRIMPER III Hand Tool Assembly 58546--1 and illustrations are forreference only and are i consists of Die Assembly 58545--1 and not drawn to scale. PRO--CRIMPER III Hand Tool Frame 354940--1. The tool is used to crimp the splices onto the wire size listedinFigure1. SUPERSEDED Reasons for reissue of this instruction sheet are Read these instructions thoroughly before crimping any splices. provided in Section 10, REVISION SUMMARY. NOT the LATEST E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change. 1 of 5 REVISION All Rights Reserved PRODUCT INFORMATION 1--800--522--6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.408-4047 Stationary Jaw Upper Die Die Retaining Screws Indenters Anvils Lower Die Figure 2 2. DESCRIPTION (Figures 1 and 2) 5. Insert the die retaining screw through the moving jaw and through the die. Tighten the screw The tool features a tool frame with a stationary jaw just enough to hold the die in place. Do not tighten and handle, a moving jaw, a moving handle, and an thescrewcompletely at this time. adjustable ratchet that ensures full crimping. 6. Carefully close the tool handles, making sure The tool frame holds a die assembly with three that the anvils and indenters align properly. crimping chambers. The die assembly features an Continue closing the tool handles until the ratchet upper die and a lower die. Die retaining screws are has engaged sufficiently to hold the dies in place, used to position and secure the dies in the tool frame. then tighten both die retaining screws. 7. To disassemble, open the tool handles until the ratchet releases, remove the two die retaining 3. DIEASSEMBLYINSTALLATIONANDREMOVAL screws, and slide the dies out of the tool jaws. 1. Open the tool handles and remove the two die retaining screws from the tool jaws. 4. CRIMPINGPROCEDURE Before using the tool, the crimping chambers and 2. Place the upper die in the stationary jaw of the NOTE tool ratchet should be inspected as specified in tool frame so that the largest indenter is facing Section 5, CRIMP HEIGHT INSPECTION, and inward. See Figure 2. i Section 6, SHUT HEIGHT ADJUSTMENT. 3. Insert the die retaining screw through the Refer to Figure 1 and select wire of the specified size stationary jaw and through the die. Tighten the and insulation diameter. Strip the wire to the length screw just enough to hold the die in place. Do not indicated, taking care not to nick or cut wire strands. tightenthescrewcompletely at this time. Select an applicable splice and identify the 4. Place the lower die in the moving jaw of the tool appropriate crimping chamber according to the wire frame so that the largest anvil is facing inward. See size markings on the dies. Refer to Figure 3 and Figure 2. proceed as follows: 2 of 5 RevG

Tariff Desc

8203.20 TOOLS, crimping, but NOT including crimping tools put up in packs containing electrical connectors Op. 27.05.1985 Dec. 27.05.1985 - TC 8532098
AGASTAT - TE CONNECTIVITY
ALCOSWITCH - TE CONNECTIVITY
Alpha Sensors
AMP - TE CONNECTIVITY
AMP FROM TE CONNECTIVITY
AMP/TYCO
AUGAT - TE CONNECTIVITY
AXICOM - TE CONNECTIVITY
AXIOHM
AXIOHM / TXCOM
BUCHANAN - TE CONNECTIVITY
CGS - TE CONNECTIVITY
CII - TE CONNECTIVITY
CITEC - TE CONNECTIVITY
CORCOM - TE CONNECTIVITY
CROMPTON - TE CONNECTIVITY
Deutsch
Deutsch Group
DEUTSCH UK
ELCON - TE CONNECTIVITY
Entrelec
ENTRELEC - TE CONNECTIVITY
ENTRELEC UK
ERNI
ERNI COMPONENTS
ERNI Elec
ERNI ELECTRONICS
GREENPAR - TE CONNECTIVITY
HOLSWORTHY - TE CONNECTIVITY
HTS - TE CONNECTIVITY
HUM
Kemtron
KILOVAC-TE CONNECTIVITY
Laird External Antennas
LUCENT TECH / TYCO
MADISON CABLE / TE
MADISONCABLE - TE CONNECTIVITY
Measurement Specialties
Measurement Specialties Inc.
Measurement Specialties, Inc.
NEOHM
NEOHM - TE CONNECTIVITY
OEG - TE CONNECTIVITY
PLM
Polamco
POLAMCO - TE CONNECTIVITY
POTTER&BRUMFIELD - TE CONNECTIVITY
PRODUCTSUNLIMITED - TE CONNECTIVITY
RAYCHEM
RAYCHEM - TE CONNECTIVITY
RAYCHEM RPG
RYC
SCHRACK
SCHRACK - TE CONNECTIVITY
SENSOR SOLUTIONS - TE CONNECTIVITY
SIGMA
SIGMAINDUCTORS - TE CONNECTIVITY
TE
TE Application Tooling
TE CONNECTIVITY
TE Connectivity ADC
TE Connectivity Agastat
TE Connectivity Alcoswitch
TE Connectivity AMP
TE Connectivity Axicom
TE Connectivity Buchanan
TE Connectivity CGS
TE Connectivity CII
TE Connectivity Citec
TE Connectivity CO-EV
TE Connectivity Corcom
TE Connectivity DEUTSCH
TE Connectivity Hartman
TE Connectivity Holsworthy
TE Connectivity Kilovac
TE Connectivity Madison
TE Connectivity Nanonics
TE Connectivity Neohm
TE Connectivity OEG
TE Connectivity P&B
TE Connectivity Products Unlimited
TE Connectivity Q-Cees
TE Connectivity Raychem
TE Connectivity Schrack
TE Connectivity Sigma Inductors
TE Connectivity / ABB Entrelec
TE Connectivity / Agastat
TE Connectivity / Agastat Brand
TE Connectivity / Alcoswitch
TE Connectivity / Alcoswitch Brand
TE Connectivity / AMP
TE Connectivity / AMP Asia
TE Connectivity / AMP Brand
TE CONNECTIVITY / AUGAT
TE Connectivity / Axicom
TE Connectivity / Buchanan
TE Connectivity / Buchanan Brand
TE Connectivity / CGS
TE Connectivity / CGS Brand
TE Connectivity / Chip Coolers Brand
TE Connectivity / CII
TE Connectivity / CII Brand
TE CONNECTIVITY / CITEC
TE Connectivity / Citec Brand
TE Connectivity / CO-EV
TE Connectivity / CoEv Magnetics Brand
TE Connectivity / Corcom
TE Connectivity / Corcom Brand
TE Connectivity / Critchley Brand
TE CONNECTIVITY / CROMPTON
TE Connectivity / DEUTSCH
TE CONNECTIVITY / DEUTSCH AUTOMOTIVE
TE CONNECTIVITY / ELCON
TE Connectivity / Elcon Brand
TE Connectivity / Energy
TE CONNECTIVITY / ENERGY DIVISION
TE Connectivity / Entrelec
TE Connectivity / ERNI
TE CONNECTIVITY / GREENPAR
TE Connectivity / Hartman
TE Connectivity / Hartman Brand
TE Connectivity / Hirschmann
TE Connectivity / Holsworthy
TE Connectivity / Holsworthy Brand
TE CONNECTIVITY / HTS
TE Connectivity / Intercontec
TE Connectivity / Kemtron
TE Connectivity / Kilovac
TE Connectivity / Kilovac Asia
TE Connectivity / Kilovac Brand
TE Connectivity / Kissling
TE Connectivity / Laird External Antennas
TE Connectivity / Linx Technologies
TE Connectivity / Madison
TE CONNECTIVITY / MADISON CABLE
TE CONNECTIVITY / MICRODOT
TE Connectivity / Microdot Brand
TE Connectivity / Midtex
TE Connectivity / Midtex Brand
TE Connectivity / Nanonics
TE Connectivity / Nanonics Brand
TE Connectivity / Neohm
TE Connectivity / Neohm Brand
TE Connectivity / OEG
TE Connectivity / OEG Brand
TE Connectivity / P&B
TE Connectivity / P&B Brand
TE Connectivity / Polamco
TE CONNECTIVITY / POTTER & BRUMFIELD
TE CONNECTIVITY / POTTER-BRUMFIELD
TE CONNECTIVITY / PRODUCTS UNLIMITED
TE Connectivity / Products Unlimited Brand
TE Connectivity / Q-Cees
TE Connectivity / Raychem
TE Connectivity / Raychem Brand
TE Connectivity / Schrack
TE Connectivity / Schrack Brand
TE Connectivity / Sensor
TE Connectivity / Sigma Inductors
TE Connectivity / TE Deutsch ICT
TE Connectivity /CGS Brand
TE Connectivity Aerospace, Defense and Marine
TE Connectivity Alcoswitch Switches
TE Connectivity AMP Connectors
TE Connectivity Corcom Filters
TE Connectivity Deutsch Connectors
TE Connectivity Divested
TE Connectivity Energy
TE Connectivity Measurement Specialties
TE Connectivity Passive Product
TE Connectivity Potter & Brumfield Relays
TE Connectivity Raychem Cable Protection
TE Connectivity Raychem Circuit Protection
TE CONNECTIVITY SENSORS
TE CONNECTIVITY/ CHIPS COOLERS BRAND
TE CONNECTIVITY/ CII BRAND
TE CONNECTIVITY/ABB ENTRELEC
TE Connectivity/Agastat Brand
TE Connectivity/Amp Brand
TE Connectivity/COEV Magnetics
TE CONNECTIVITY/DEUTSCH
TE Connectivity/Kilovac Brand
TE Connectivity/Madison Cable
TE CONNECTIVITY/PRODUCTS UNL
TE Connectivity/Sigma Inductors
TE SENSOR SOLUTIONS
TEConnectivity
TEConnectivity/AMP
TES
TYC
Tyco
TYCO AMP
Tyco Electronics
Tyco Lucent Tech
TYCO POWER SYSTEMS
TYCO TB
TYCO/CHIPCOOLERS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted