Rohm Analogue Switch ICs
Analogue switch ICs are integrated circuits (ICs) that can be used to control the opening and closing of an electric circuit in order to allow or restrict the flow of electricity. They are used in a variety of products and applications where a small, inexpensive, and reliable means of controlling electric signals is needed.
Analogue switches are built on silicon CMOS chips, which are tiny and consist of thousands of transistors connected to one another. The output from the IC is either a binary 0 or 1, where 0 means the switch is closed and 1 means the switch is open. This means that the IC has two states, open or closed. Each of these states has different effects on the circuit.
Analogue switches are usually driven by a control input, either a digital signal (from a microcontroller or digital logic circuit) or an analogue signal (from a timer or amplifier). This control input is used to set the state of the switch, either open or closed. If a digital signal is used, the switch can be set to either the open or the closed states, while if an analogue signal is used, a variable amount of current can be applied to the switch, allowing it to be set to any position between fully open and fully closed.
Analogue switches are used in a variety of applications including power supplies, audio devices, and medical equipment, where reliability and accuracy are important parts of the system.