Scotchlok 567 Self-Stripping Electrical Tap Connectors Data Sheet Application Recommended Installation Tools Use Part No. 567 to electrically connect a (tap) wire 9 Linemans Pliers end to a through (run) wire and insulate the 3M Crimping Tool No. E-9BM connection. Installation Instructions Wire Range 2 (Tap) 18-14 AWG (.75-1.5 mm ): WARNING 2 (Run) 12-10 AWG (4.0 mm ) Turn power off before installing or removing terminal. All electrical Solid or stranded copper conductors. For use with work should be done according to appropriate electrical codes. common thermoplastic insulated wires such as: T, TF, TFF, TFN, TFFN, AWM, TEW, SAE-GPT with a 1. Place unstripped run wire inside run channel. maximum insulation diameter of (tap) .145 inches (3.5 mm) run .190 inches (4.8 mm). 2. Insert unstripped tap wire completely and check Maximum recommended current for general purpose its position in the inspection port. applications: 3. Hold tool perpendicular to the wires and make the 18 AWG - 7 AMPS, 16 AWG - 10 AMPS, connection by driving the u-contact down flush 14 AWG-15 AMPS, 12 AWG-20 AMPS, with the top of the plastic insulator. 10 AWG-25 AMPS. 4. Close hinged top cover until latched. Construction Regulatory Agencies U-contact - Tin plated brass, .03 in. (.8 mm) thick UL Listed - Tested per UL Standard 486C Insulator - Flame retardant polypropylene, Color - brown UL file No. E23438 CSA certified - CSA Std. C22.2 No. 0. 188-MI983 Weight CSA File No. LR15503, LR32411 .0067 lb. (3.0 gm) (Voltage rated at 600 volts maximum, building wire: 1000 volts maximum, signs, fixtures and luminaires. Operating Temperature: 105C.)Engineering Specification Self-Stripping Electrical Connector (as manufactured by 3M, part No. 567) capable of connecting a tap wire 18-14 AWG solid or stranded copper to a run wire solid or stranded copper. Connector shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 volts maximum, signs, fixtures and luminaires, and temperature rated 105C maximum. 3M and Scotchlok are trademarks of 3M Company. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA www.3M.com/elpd 3M 2003 78-8126-5860-3-A