5507761 Altech

30478 LTSR 2014 Final.qxp LTSR 2014.QXD 2014-06-10 5:49 PM Page 17 Material: Applications: Body: Polyamide 6 Explosion endangered areas L.C.I.E. ATEX Seal: Neoprene Machines and devices Measuring and control engineering Flat Seal: Neoprene Plant installations Color: Blue Technical Properties: Maximum strain relief through clamping range Temperature Range Trapezoidal thread with high torque guarantees -35 to 95C ATEX Characteristics: tight and permanent fit of the dome nut (-31 to 203F) Certificate: LCIE 07 ATEX 6082X Device Group: II Gas tight and watertight Type of protection: Ex e Category: 2 and 3 Test Standards: EN60079-0 Atmosphere: G/D EN60079-7 Zone: 1, 2, 21 and 22 EN61241-0 NPT Thread EN61241-1 Outer thread Clamping range Cat. No. Std. mm Blue Pk. Dimensions NPT 3/8 5-8 5507760 50 Thread H E L C P Thread NPT 1/2 7-12 5507761 50 Size mm mm mm mm mm mm NPT 3/4 12-18 5507762 20 NPT 1 16-25 5507763 20 NPT 3/8 19 11 38 8.5 8.7 17.1 NPT 1/2 24 14 44 12.5 12.5 21.2 NPT 3/4 33 15 54 18.5 18.5 26.7 NPT 1 42 18 60 25.5 25.5 33.3 M12x1.5 15 8 32 6.7 6.8 12.0 Metric Thread* M16x1.5/9 19 10 37 8.5 8.5 16.0 M16x1.5/11 22 10 39 10.5 10.5 16.0 Outer thread Clamping range Cat. No. Std. M20x1.5/13 24 10 40 12.5 12.5 20.0 mm Blue Pk. M20x1.5/16 27 10 43 14.5 14.5 20.0 M25x1.5/16 27 10 45 14.5 14.5 25.0 M 12 x 1.5 4-6.5 5507560 50 M25x1.5/21 33 10 49 18.5 18.5 25.0 M 16 x 1.5/9 5-8 5507561 50 M32x1.5 42 10 52 25.5 25.5 32.0 M 16 x 1.5/11 5-10 5507562 50 M40x1.5 53 10 62 32.5 32.5 40.0 M 20 x 1.5/13 7-12 5507563 50 M50x1.5 60 12 67 39.0 39.0 50.0 M 20 x 1.5/16 10-14 5507564 50 M63x1.5 70 12 68 48.5 48.5 63.0 M 25 x 1.5/16 10-14 5507565 20 M 25 x 1.5/21 12-18 5507566 20 M 32 x 1.5 16-25 5507567 20 Insert Neoprene M 40 x 1.5 22-32 5507568 20 Dome Nut Body PA 6 M 50 x 1.5 28-38.5 5507569 10 PA 6 M 63 x 1.5 40-48 5507570 5 E H L * Extended thread available consult Altech Locknuts sold separately, see page 24. 17 Altech Corp. l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com Thread P C30478 LTSR 2014 Final.qxp LTSR 2014.QXD 2014-06-17 4:37 PM Page 18 Material: Applications: Body: Polyamide PA 6 For explosion endangered areas 25 % Glass fiber Reinforced according to EN 50014 and Seal: Neoprene EN 50019 ECA clamping ring: Polycarbonate Machines and devices Measuring and control engineering Characteristics: Plant installations PG/Metric thread Gland must be mounted with flat seal and locknut. Extended thread available Temperature Range Strain relief through clamping ring -20 to 55C L.C.I.E. ATEX (-4 to 131F) ECA Clamping Ring (Punch-out Seal) Outer thread Clamping range Cat. No. Std. mm Black Pk. PG ATEX Characteristics: PG 9 3.5 - 8.5 5507050 50 Certificate: LCIE 99 ATEX 6030X Device Group: II PG 11 4.0 - 10.5 5507051 50 Type of protection: Ex e Category: 2 and 3 PG 13.5 5.0 - 12.5 5507052 50 PG 16 6.5 - 14.0 5507053 50 Test Standards: EN60079-0 Atmosphere: G/D PG 21 8.0 - 18.5 5507054 20 EN60079-7 Zone: 1 and 2 (21 and 22 PG 29 10.0 - 25.0 5507055 20 EN61241-0 with seal ring) EN61241-1 Metric M 16 x 1.5 3.5 - 8.5 5507250 50 M 20 x 1.5/13 5.0 - 12.5 5507251 50 M 20 x 1.5/16 6.5 - 14.0 5507252 50 M 25 x 1.5 8.0 - 18.5 5507253 20 M 32 x 1.5 10.0 - 25.0 5507254 20 Dimensions Thread H E L C P PG/M Seal Neoprene Clamping Size mm mm mm mm mm mm Polycarbonate PG9 19 8 32 8.5 9.0 15.2 Dome Nut Body PG11 22 8 35 11.5 11.0 18.6 Polyamide Polyamide PG13.5 24 9 36 12.5 13.5 20.4 PG16 27 10 40 14.5 15.0 22.5 PG21 33 11 44 18.5 19.0 28.3 PG29 42 12 55 25.0 25.0 37.0 M 16x1.5 19 8 32 8.5 9.0 16.0 M 20x1.5/13 24 9 36 12.5 13.5 20.0 M 20x1.5/16 27 9 39 14.5 15.0 20.0 E M 25x1.5 33 11 44 18.5 19.0 25.0 L H M 32x1.5 42 12 55 25.0 25.0 32.0 Locknuts and seal rings sold separately, see page 24 and 35. 18 Altech Corp. l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com C P PG/M