DS495SPE-3

ARTESYN DS495SPE 495 Watts Distributed Power System Advanced Energy s Artesyn DS495SPE is housed in 1U high DATA SHEET rack-mounting enclosures measuring just 3.4 x 7.7 inches (86.3 x 196.5 mm). This form factor is significantly shorter Front-end Bulk Power than that of similarly rated earlier-generation power supplies Total Output Power: freeing up valuable system space and is achieved 495 W continuous by use of the latest power switching technology and high density component packaging techniques. Wide Input Voltage: 90 - 264 Vac SPECIAL FEATURES COMPLIANCE 495 W output power Conducted/Radiated EMI Class A Limits + 6 dB margin 1U power supply EN61000-4-11 Active Power Factor Correction EN61000-3-2 Harmonic compliance Inrush current control SAFETY 80plus Platinum efficiency IEC62368 N+N redundant UL/cUL Hot-pluggable Demko +CB Report Active current sharing CE Mark Full digital control CCC PMBus compliant BSMI Standard airflow Two-year warranty 2020 Advanced Energy Industries, Inc.DS495SPE ELECTRICAL SPECIFICATIONS Input Input range 90 - 264 Vac Frequency 47 Hz to 63 Hz Efficiency 94.0% peak Max input current 6.6 Arms 90 Vac Inrush current 25 Apk Conducted EMI Class A with 6 dB margin Radiated EMI Class A with 6 dB margin Power factor >0.9 beginning at 20% load ITHD 10% Leakage current 1 mA Hold-up time 10 ms at full load Output Main DC Output Standby DC Output MIN NOM MAX MIN NOM MAX Nominal setting -0.20% 12 0.20% -2.5% 12 +2.5% Total output regulation range 11.4 V 12.6 V 11.4 V 12.6 V Dynamic load regulation range 11.4 V 12.6 V 11.4 V 12.6 V Output ripple (peak to peak) 120 mV 120 mV 1 Output current 2.0 A 41.25 A 0.0 A 3.0 A Current sharing Within 5% of full load rating N/A Capacitive loading TBD 38,000 F 47 F 4,700 F Start-up from AC to output 2000 ms 1700 ms Output rise time 2 ms 20 ms 2 ms 20 ms 1 Minimum current for transient load response testing only. Unit is designed to operate and be within output regulation range at zero load. ELECTRICAL SPECIFICATIONS Protections Main Output MIN NOM MAX 2 Overcurrent protection 110% 150% 1 Overvoltage protection 13.5 V 15.0 V Undervoltage protection 10.0 V 11.0 V Overtemperature protection Yes Fan fault protection Yes Standby Output 2 Overcurrent protection 3.6 A 4.5 A 2 Overvoltage protection 13.5 V 15.0 V Undervoltage protection 10.0 V 11.0 V 1 Latch mode 2 Standby protection is auto-recovery 2 advancedenergy.com