X-On Electronics has gained recognition as a prominent supplier of MT4N-AA-E0 Digital Panel Meters across the USA, India, Europe, Australia, and various other global locations. MT4N-AA-E0 Digital Panel Meters are a product manufactured by Autonics. We provide cost-effective solutions for Digital Panel Meters, ensuring timely deliveries around the world.

MT4N-AA-E0 Autonics

MT4N-AA-E0 electronic component of Autonics
Product Image X-ON
Product Image X-ON
Product Image X-ON

Images are for reference only
See Product Specifications
Part No.MT4N-AA-E0
Manufacturer: Autonics
Category: Digital Panel Meters
Description: DIGITAL MULTI PANEL METER, 4-DIGIT, 12VAC TO 24VAC / 12VDC TO 24VDC
Datasheet: MT4N-AA-E0 Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
1: USD 287.9573 ea
Line Total: USD 287.96 
Availability - 0
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0
Ship by Thu. 07 Nov to Wed. 13 Nov
MOQ : 1
Multiples : 1
1 : USD 287.9573

   
Manufacturer
Product Category
Brand
No. Of Digits / Alpha
Meter Function
Meter Range
Digit Height
Panel Cutout Height
LoadingGif
 
Notes:- Show Stocked Products With Similar Attributes.

We are delighted to provide the MT4N-AA-E0 from our Digital Panel Meters category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the MT4N-AA-E0 and other electronic components in the Digital Panel Meters category and beyond.

Image Part-Description
Stock Image CT6M-1P4T
Counter: electronical; 2x LED; time/pulses; SPDT; Cutout:68x68mm
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image E50S8-1000-6-L-5
Encoder: incremental; Usup:5VDC; 1000imp/revol; shaft 8mm; IP50
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image BS5-K2M
Sensor: photoelectric; Range:5mm; NPN; DARK-ON, LIGHT-ON
Stock : 20
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FDPF-210-05R
Sensor: fiber-optic; Range: 0÷70mm; Oper.mode: diffuse-reflective
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FDW10-320-02B
Sensor: fiber-optic; Range: 0÷230mm; -30÷70°C; Len: 2m
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FDW10T-320-02B
Sensor: fiber-optic; Range: 0÷230mm; -30÷70°C; Len: 2m
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FLF-310-10V
Sensor: fiber-optic; Range: 0÷60mm; Oper.mode: diffuse-reflective
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FLF-320-05
Sensor: fiber-optic; Range: 0÷7mm; Oper.mode: diffuse-reflective
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FLF-320-05R
Sensor: fiber-optic; Range: 0÷7mm; Oper.mode: diffuse-reflective
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image BS3-F1M-P
Sensor: photoelectric; Range: 5mm; PNP; DARK-ON,LIGHT-ON; 50mA
Stock : 4
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image ACM20-2-AC1-R-F-C
Digital Panel Meters 10A 85-264Vac Supply Frequency Reading
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 25.330.0453.1
Terminal Block Plug - Type 8113S/G - 5mm Pitch - 4 Position - Vertical - Marked - Volume (CM3): 23.900
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 25.521.3253.0
Terminal Strip For PCB - 2.5mm2 - 5.00mm - 2 Poles
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-20PC-3-GS-C
Digital Panel Meters 3.5 Digit +-200V Std Green
Stock : 7
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-EB-C
Digital Panel Meters Multipurpose board for DMS-30/40 meters
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-20LCD-1-DCM-C
Digital Panel Meters +8.0 to 50.0Vdc
Stock : 158
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 4400-01032-0
Murata Power Solutions Digital Panel Meters Crimp terminal for 12pin DMS Series
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-40PC-1-GS-C
Digital Panel Meters 4.5 Digit +-2V Input Std Green
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-20LCD-2-9-C
Murata Power Solutions Digital Panel Meters -20V 9V
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LE-01
Electric energy meter; analogue,mounting; single-phase; Inom: 5A
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

Specifications Parameter Model MT4N Parameter Display Function Note PANEL METER Input type Selectable RMS/AVG in AC type Available AC type only. IN-T Power supply 12-24 VDC/AC 100-240 VAC IN-R Input range Input range selection - Power consumption DC: 3W, AC: 5VA 5VA STND SCAL FREQ DISP Display Display type selection Selectable: / / MT4N SERIES Display method 7 Segment LCD Display, Character height: 9mm Standard Standard scale range Display max. display value of STND STND FREQ Frequency Frequency display Available AC type only. 23 5 DC Type: F.S.0.1% rdg2digit / AC Type: F.S.0.3% rdg3digit M A N U A L SCAL Scale Scale range Display accuracy DC/AC Type: Within F.S.0.3% rdg3digit only for Current 5A terminal These are displayed in SCAL only and set H-SC High scale Set max. value of display range PA1 -10 to 50 DC/AC Type: F.S.0.5% rdg3digit max/min. display value(-1999 to 9999). L-SC Low scale Set min. value of display range (Parameter 1) Input DC Voltage/Current, AC Voltage/Current, AC Frequency Dot Set decimal point position It is displayed in / only and set the position. DOT SCAL FREQ Max. allowable input 110% F.S. for input spec. D-UNT Display unit lamp Set display unit Set range: mV / V / mA / A / Hz / off STND/SCALCorrection range: 0.100 to 5.000 A/D conversion method Practical oversampling using successive approximation ADC : Upgrade feature Input bias high Correct High-limit gradient of display value INB.H FREQ Correction range: 0.100 to 9.999 Sampling cycle 50ms(DC), 16.6ms(AC)(1/12,000) Input bias low Correct Low-limit gradient of display value Correction range: -99 to 99 INB.L Max. display range -1999 to 9999(4 Digit) -2 -1 0 1 Input bias exponent Set display index of frequency mode Set range: 10 /10 /10 /10 INB.E Relay output Contact capacity: 125VAC 0.3A, 30VDC 1A/Contact composition: N.O(1a) OU1.T Out1 type Select output mode of OUT1 OFF/ HI/ LO / HL/ HL-G Preset output NPN/PNP Open Collector output 12-24VDC 2V 50mA Max.(Load resistance) Out2 type Select output mode of OUT2 / / / / OU2.T OFF HI LO HL HL-G RS485 communication output HYS.1 Out1 hysteresis Select hysteresis of OUT1 Within 1 to F.S. 10%(Variable depending on set of input range and prescale.) Sub output Baud rate: 1200/2400/4800/9600, Transmission method: 2 wires half duplex, Tuning HYS.2 Out2 hysteresis Select hysteresis of OUT2 (Transmission output) method: Sub-synchronization, Protocol: Modbus type Startup ompensation STA.T Set startup compensation time Set range: 0.0 to 99.9 sec. time DC4-20mA output Resolution: 12,000 division(Load resistance max. 600) Thank you very much for selecting Autonics products. PEK.T Peak time Set monitoring delay time for peak value(sec) Set range: 00 to 30 sec. AC measuring function Selectable RMS or AVG For your safety, please read the following before using. DIS.T Display time Set sampling time(sec) 0.1 to 5.0 sec.(Variable by 0.1 sec.) Frequency measuring Measurement range: 0.100 to 9999Hz(Differ according to decimal point position) COLR Color Select color RED / GRN / YEL / R-G / G-R function Caution for your safety No: Enable/disable zero adjustment key 1 ZERO Zero key Enable zero adjustment key PA2 Hold function Includes(Outer hold function) Yes: Enable zero adjustment key Please keep these instructions and review them before using this unit. (Parameter 2) Hold: Use external terminal as Hold terminal Insulation resistance Min. 20(at 500VDC megger) EVIN Event input Set external terminal(11, 12) function Zero: Use external terminal as zero adjustment terminal Please observe the cautions that follow; 1000VAC for 1 minute 2000VAC for 1 minute Dielectric strength It is enable to use in option mode. Warning Serious injury may result if instructions are not followed. (Between external terminal and case) (Between external terminal and case) FS-H Full scale high Set High-limit value output position of PV output Min. set range: Min. 10% F.S. Product may be damaged, or injury may result if instructions are not followed. Noise strength 2kV the square wave noise(pulse width: 1) by the noise simulator Caution Full scale low Set Low-limit value output position of PV output Max. set range: Max. 10% FS-L FS-H Mechanical 0.75mm amplitude at frequency of 10 to 55Hz in each of X, Y, Z direction for 2 hours ADRS Address Set communication address Set range: 01 to 99 The following is an explanation of the symbols used in the operation manual. Vibration BPS Bit per second Set baud rate(bps) Selectable:1200/2400/4800/9600 Malfunction 0.5mm amplitude at frequency of 10 to 55Hz in each of X, Y, Z direction for 10 minutes Caution: Injury or danger may occur under special conditions. Parity bit Set parity bit Selectable: None/ Even / Odd 2 PRTY Mechanical 100m/s (Approx. 10G) in X, Y, Z directions for 3 times STP Stop bit Set stop bit Set range: 1/2 Shock 2 Warning Malfunction 300m/s (Approx. 30G) in X, Y, Z directions for 3 times RSY.T Response wating time Set response wating time Set range: 5 to 99 LOC Lock Enable lock status Selectable: OFF/LOC1/LOC2/LOC3 1.In case of using this unit with machinery(Nuclear power control, medical equipment, vehicle, train, airplane, Ambient -10 to 50, Storage: -20 to 60 Environ- temperature OUT1 high preset Set value of OUT1 High-limit output Set the range within display range of combustion apparatus, entertainment or safety device etc), it is required to install fail-safe device. OU1.H / . It may cause a fire, human injury or property loss. ment STND SCAL Storage OUT1 low preset Set value of OUT1 Low-limit output OU1.L 35 to 85%RH, Storage: 35 to 85%RH For MT4N-DV/DA Type, set range of 2.It must be mounted on panel. humidity PA0 OU2.H OUT2 high preset Set value of OUT2 High-limit output OU1.H/OU2.H and OU1.L/OU2.L is within -5 It may give an electric shock. 2 Insulation type (Parameter 0) OU2.L OUT2 low preset Set value of OUT2 Low-limit output to 110%. 3.Do not connect, inspect or repair terminals when it is power on. Approval - High peak Max. value by data monitoring It may give an electric shock. H.PEK key is pressed, it will be returned 4.Do not disassemble or modify this unit. If needs, please contact us. Low peak Min. value by data monitoring to initial status. Unit weight Approx. 64g L.PEK It may cause a fire and give an electric shock. 1: Mark indicated that equipment protected throughout by double insulation or reinforced insulation. 5.Please check the number of terminal when connecting power or measured input. Parameter setting 2: The indicator has no Hold function. It may cause a fire. Environment resistance is rated at no freezing or condensation. Press MODE key for 2 sec. in RUN mode, [ PA1](Parameter 1) is displayed. RUN Caution Press MODE key for 4 sec. in RUN mode, [ ] is displayed after [ ]. PA2 PA1 MODE key When press MODE key is pressed continually, it stops displaying at [ PA2]. Specification of measured input and range 2 sec. 1.This unit shall not be used outdoors. It might shorten the life cycle of the product or give an electric shock. Standard [ ] Praescale [ ] Input ST N D SCAL It is advanced to current display parameter releasing MODE key at [ ] or [ ]. Measured input PA1 PA2 PA1 Use this product indoors only. Do not use the product outdoors or at locations subject to the Type and range impedance Press MODE key for 3 sec., it is returned to RUN at any position. Display rang [Fixed] Display range [Variable] temperatures or humidity outside.(Example: rain, dirty, frost, sunlight, condensation, etc.) MODE key If any key is not touched for 60 sec. in each parameter, it will return to RUN mode. 2 sec. 2.When connecting wire, use AWG 20(0.50) be used and tighten screw bolt on terminal block 0-50V [50V] 434.35 0.00 to 50.00(Fixed) . with 0.74 to 0.90N m strength. After return to RUN mode, press MODE key within 2 sec., it will return to 0-10V [ V] 434.35 0.00 to 10.00(Fixed) 10 PA2 It may cause a malfunction or fire due to contact failure. previous parameter.(Refer to the below descriptions for set parameter.) DC 0-5V [5V] 43.35 0.000 to 5.000(Fixed) 3.Please observe the rated specification. Volt It might shorten the life cycle of the product and cause a fire. 0-1V [1V] 43.35 0.000 to 1.000(Fixed) -1999 to 9999(Variable) Change the parameter Parameter 0 4.Do not use beyond of the rated switching capacity of relay contact. 0-250mV [ mV] 2.15 0.0 to 250.0(Fixed) 250 -199.9 to 999.9(Variable) It may cause insulation failure, contact melt, contact failure, relay broken and fire etc. RUN 0-50mV [50mV] 2.15 0.00 to 50.00(Fixed) -19.99 to 99.99(Variable) setting value 5.In cleaning the unit, do not use water or an oil-based detergent. -1.999 to 9.999(Variable) 1.Advance to the parameter to be changed when 0-500mA [500mA] 0.1 0.0 to 500.0(Fixed) MODE It may cause a fire and give an electric shock. press MODE key continuously in RUN mode and 6.Do not use this unit in place where flammable or explosive gas, humidity, direct ray of the 0-200mA [200mA] 0.1 0.0 to 200.0(Fixed) Set High-limit preset value of OU1.T. release MODE key at the parameter.(Refer to (Display position will be OU1.H light, radiant heat, vibration or impact, etc. exists. (It is not displayed when OU1.T mode DC 0-50mA [ mA] 1.1 0.00 to 50.00(Fixed) 50 Parameter settin) different depending on It may cause a fire or explosion. value of PA2 is OFF.) Ampere 2.When press MODE key in each parameter, the MODE 4-20mA [4-20mA] 1.1 4.00 to 20.00(Fixed) decimal point position.) 7.Do not inflow dust or wire dregs into the unit. Change the value by keys. initial mode of the parameter is displayed.(Refer It may cause a fire or mechanical malfunction. 0-5mA [5mA] 11.1 0.000 to 5.000(Fixed) OU1.T to the description of each parameter.) Set Low-limit preset value of . OU1.L 8.Please wire properly after checking the polarity of measuring terminals. 0-2mA [ mA] 11.1 0.000 to 2.000(Fixed) Please wire proper terminal 2 (It is not displayed when OU1.T mode 3.When press one of , , keys in display mode. It may cause a fire or explosion. to its max. input voltage 0-250V [250V] 1.109 0.0 to 250.0(Fixed) value of PA2 is OFF.) MODE Setting within 30 to 100% of input Ex) Mode Change the value by keys. 0-125V [125V] 1.109 0.0 to 125.0(Fixed) value Saved setting value terminal. Ordering information IN-R 250V Set High-limit preset value of OU2.T. AC 0-50V [50V] 222 0.00 to 50.00(Fixed) OU2.H flashes every 0.5 sec. When it is higher than Press one (It is not displayed when OU2.T mode Volt N Without output function 0-25V [ V] 222 0.00 to 25.00(Fixed) 25 input voltage, it may cause MT 4NNDV E value of PA2 is OFF.) MODE 4.Change the set value by or key when setting 0 Relay output(2 Contacts) 0-5V [5V] 22 0.000 to 5.000(Fixed) breakdown of terminal and Change the value by keys. value is flashed. Control output 1 NPN Open collector output(OUT1,GO,OUT2) over display range and 0-2.5V [2.5V] 22 0.000 to 2.500(Fixed) Set Low-limit preset value of OU2.T OU2.L Ex) Change AC type measured input from 250V to 125V. the accuracy is decreased 2 PNP Open collector output(OUT1,GO,OUT2) 0-5A [ A] 0.01 0.000 to 5.000(Fixed) OU2.T 5 (It is not displayed when mode Setting Setting when it is connected to 3 Relay(OUT1)+PV transmission(DC4-20mA)output value of PA2 is OFF.) 0-2.5A [2.5A] 0.01 0.000 to 2.500(Fixed) Mode MODE value value MODE the terminal under 30%. Change the value by keys. 4 Relay(OUT2)+RS485 communication output AC 0-500mA [500mA] 0.1 0.0 to 500.0(Fixed) IN-R 250V 125V Press one It displays High peak value in RUN mode Ampere 0-250mA [250mA] 0.1 0.0 to 250.0(Fixed) H.PEk Power supply E 12-24VDC/AC and keys are pressed, it is 0-100mA [ mA] 0.5 0.0 to 100.0(Fixed) 100 4 100-240VAC MODE reset. DISP 0-50mA [50mA] 0.5 0.00 to 50.00(Fixed) DV DC Volt It displays Low peak value in RUN mode L.PEk 5. When press MODE key to complete the change and Input and keys are pressed, it is DA DC Ampere it is advanced to the next mode after flashes 2 times. MODE reset. Monitoring peak display value function AV AC Volt MODE 6. When press key for 3 sec. after change, it If PEK.T monitoring delay time in PA2 is '00', H.PEK and AA AC Ampere [PA 0: H.PEK/ L.PEKmode, PA 2: PEK.Tmode ] returns to RUN mode. Size L.PEK are not displayed. It monitors Max./Min. value of display value based on current display value and then display the data in H.PEK N DIN W48H24 Digit mode and L.PEK mode of parameter 0. Set delay time(0 to 30 sec.) in PEK.T mode of parameter 2 in order to avoid Parameter 1 4 9999(4 Digit) <Measured input specification for each model> caused by initial overcurrent or overvoltage, when monitoring the peak value. Delay time is 0 to 30 sec. and it starts Item to monitor the peak value after set time. PA1 MT Multi Meter Model Measured input range When keys are pressed at H.PEK and L.PEK mode of parameter 0, it will be initialized. Select measured input specification. MT4N-DV 50V 10V 5V 1V 250mV 50mV 50V Monitoring function is not indicated when setting the PEK.T of parameter 2 as0". (Refer toSpecification of IN-R Front panel identification Panel cut-out 500mA 200mA 50mA 4-20mA 5mA measured input and rang.) MT4N-DA MODE 2mA 500mA (Unit: mm) Current output(DC4-20mA) Measuring AC frequency Set display type for measured input as Min. 55 OUT1: Preset output of OUT1 MT4N-AV 250V 125V 50V 25V 5V 2.5V 250V STND SCAL FREQ and FREQ. DISP GO: Preset Go output of OUT1/OUT2 Scale adjustment function function [ PA 1: DISP mode ] S 25 500 250 100 50 It is only available for AC type. A A mA mA mA mA MODE MT4N-AA OUT2: Preset output of OUT2 5 +0.3 It measures input signal frequency when it is an AC input A [ PA 2: FS-H/ FS-Lmode ] 22.2-0 MODE: MODE key Select measuring type for AC input type. using fixed decimal point[PA1: mode]. Measuring DOT IN-T It sets current output for preset display value at the output : Shift key mV, V Unit Select RM5 AU6 range can be changed by setting and measuring range Min. 37 current 4-20mA DC. MODE : Down key mA, A Unit +0.6 45 of decimal point position is as below chart. It is available <When DISP is STND> <When DISP is SCAL> <When DISP is FREQ> -0 It sets display value for 4mA in FS.L and 20mA in FS.H : Up key Hz Unit to adjust upper gradient in [PA 1: mode] and [PA INB.H Set decimal point position. Set frequency measuring range. It shows max. display and set range between FS-H and FS-L should be 10% STND DOT DOT 1: mode]. In order to measure frequency normally, 0 0.0 0.00 0.000 INB.E value of standard (Refer to Measuring AC F.S.(When it set as under 10% F.S., it changed as over MODE MODE input signal, over 10% F.S. of measuring range, should be frequency functio .) Terminal connection specification. 10% F.S. automatically.)Preset display value is fixed to Set display value for max. supplied. Please wire the proper measuring terminal. Display value is fixed. H-SC output as 4mA at under FS-Land 20mA at over FS-H. input of measured input. MT4N-DV- MT4N-DA- Measuring range MODE MODE Output Set display value for min. Decimal point L-SC 1 2 3 4 5 6 1 2 3 4 5 6 0.000 0.00 0.0 0 position input of measured input. 20mA MODE 250mV 5mA Measurement 0.100 to 0.10 to 0.1 to 1 to Set display unit. /50mV /2mA range 9.999Hz 99.99Hz 999.9Hz 9999Hz D.UNT Set range:mV/V/mA/A/Hz/off 5V/1V 50mA/4-20mA 0.100 to 5000Hz: Display accuracy error within MODE SOURCE SOURCE 50V/10V 500mA/200mA 4mA Min. setting range 0.3%F.S.2Digit 12-24VDC/AC 12-24VDC/AC 10% F.S. Adjust High-limit display value INB.H Adjust High-limit display value INB.H 100-240VAC 100-240VAC 5000 to 9999Hz: Display accuracy error within MT4N-AV- MT4N-AA- gradient for max. input. gradient for max. input. Display value 1%F.S.3Digit MODE MODE FS-L FS-H Set range: 0.100 to 5.000 Set range: 0.100 to 9.999 1 2 3 4 5 6 1 2 3 4 5 6 : 0.100 to 9.999(Gradient adjustment of high value) INB.H : , , , (Index adjustment of ) Adjust Low-limit display value Set index for frequency display. INB.E 10-2 10-1 10 0 10 1 INB.H INB.L INB.E 5V/ 100mA deviation for min. input. Set range: 10-210-1 2.5mV /50mA MODE MODE Set range: -99 to 99 10 010 1 Zero adjustment function 50V/25V 500mA/250mA Error correction function SOURCE SOURCE 250V/125V 5A/2.5A It adjusts the display value of the optional configured 12-24VDC/AC 12-24VDC/AC [ PA 1: INB.H/ INB.Lmode ] Enable zero adjustment by front key operation Parameter 2 100-240VAC 100-240VAC input value as zero by force, zero point error can be to select YES. Press both + keys simul- It corrects display value error of measured input. ZERO <Option> adjusted with 3 ways as below. PA2 taneously in 3 sec. The deviation value is saved in INB.L :99 (Adjust deviation of low value) MODE INB.L automatically. When zero point adjustment with front key and Relay output [MT4N--0] NPN Open Collector output [MT4N--1] INB.H : 5.000 to 0.100(Correct gradient(%) of high value) Select Preset output mode of OUT1 as Hold terminal is finished normally, zero point Select between hold input by terminal 11, 12 OU1.T Display value=(Measured value INB.H)+ INB.L OFF HI LO HL HL-G and zero set by external signal. 7 8 9 10 11 12 7 8 9 10 11 12 of measuring terminal is displayed and the EVIN Ex) Low value correction : Hold display value But, it is only displayed in OUT1 output HOLD adjusted value is saved in INB.L automatically. MODE MODE ZERO: Zero adjustment by external signal When there is an application where there is a residual included model. Input voltage of 1.2V, but a 0V display is desired, then it Set High-limit value, 20mADC output position of PV output. OUT1 OUT2 HOLD/ZERO HOLD/ZERO Oper- Input external Select Preset output mode of OUT2 as OUT1 GO OUT2 correction Front key OU2.T When input range and prescale mode are is possible by adjusting the INB.L parameter setting ation signal FS-H OFF HI LO HL HL-G value changed, the set value of FS-H and FS-L is to 12(offset correcting value or equal to 1.2V without MODE But, it is only displayed in OUT2 output MODE PNP Open Collector output [MT4N--2] Relay+Current(DC4-20mA) output [MT4N--3] change automatically as max/min. value of input PA1 Direct : Short-circuit decimal) that the desired display value of 0 can be included model. range. Press both input external Hold achieved. 7 8 9 10 11 12 7 8 9 10 11 12 , Select Preset hysteresis of OUT1 within 10% Set Low-limit value, 4mADC output position correction HYS.1 FS-L terminal no.11, Ex) High value correction of PV output. Des- keys for 3 of F.S. But, it is not displayed when OU1.T value 12 over min.50m. MODE MODE When there is an application where the high actual value cription mode is . sec. at the OFF method It is enable to HOLD/ZERO of display is 501 and exceeds the 500V display range, DC4-20mA OUT1 HOLD/ZERO OUT1 GO OUT2 measuring Select Preset hysteresis of OUT2 within Set address of RS485 communication output at INB. use in option HYS.2 ADRS then it is possible by adjusting the INB.H parameter mode. 10% of F.S. But, it is not displayed when within 01 to 99. Lmode mode. setting to 0.998(calculated by desired value of 500/actual MODE MODE OU2.Tmode is OFF. Relay+RS485 communication output [MT4N--4] value of 501), that the desired value can be achieved. Refer to description [ Error correction function], Set startup compensation time. Set baud rate of RS485 communication The offset correction range of INB.L is within -99 to STA.T BPS [ Error indication function] and [ Parameter 2] 7 8 9 10 11 12 -0 -1 output within 9600480024001200. Set range is 0.0 to 99.9 sec. 99 for D , D digit regardless of decimal point. for function and error. MODE MODE B(-) A(+) Set monitoring delay time within 00 to 30 sec. PEK.T Set parity bit. OUT1 Gradient correction function [ PA 1: INB.H mode ] HOLD/ZERO PRTY Set range: None / Even / Odd (Figure1) MODE It corrects a gradient of prescale value and display value. MODE (Figure 1)Display value Y can be adjusted as , times against X input value by Y Execute variable set display period by 0.1 Prescale function[PA1: H-SC/ L-SC mode] Set stop bit. DIS.T correction function [ ] and used as correction function of max. display value STP INB.H Time sec. within 0.1 to 5.0 sec. Set range: 1/2 [ ]. Adjustment range is 0.100 to 5.000 and multiply current gradient by the MODE This function is to display setting(-1999 to 9999) of particular High/Low-limit value in order to display H-SC MODE Y Time value. High/Low-limit value of measured input. If measured inputs are 'a' and 'b' and particular values are 'A' Y Select color with 5 modes. Set response waiting time. COLR RSM.T and 'B', it will display a=A, b=B as below graphs. Ex) To display3.000" in DC 200mV input for measured input specification as 0 to 1V, Set range: 5 to 99 RED GRN YEL R-G G-R MODE MODE Display Display Display Select 0-1VDC for measured input in Parameter 1 RED, GRN, YEL: Display with 1 color. B 0 X B a b A , : Color is changed when error is occurred. B Standard specification in input: 0-1VDC and 1.000 therefore it has to be 15.000( ) R-G G-R H-SC B Enable Lock function with 4 mode, b Input value Display LOC Ex) R-G : Red is standard and green when error is for 1VDC(Input) in order to display 3.000 for 200mVDC(input). A . OFF LOC1 LOC2 LOC3 OFF A A A occurred. MODE Display But it is unable due to setting range is 9.999. Display b Color is changed only when error i Error a b a b A a b B B In this case, please check below chart. Please set as = 15.000 INB.H H-SC OFF Disable Lock function LOC2 Lock parameter 1,2 display functio is occurred excluding 'over'. Input value Input value Input value Input value Input value Input value Lock parameter 1 Lock parameter 0,1,2 Setting LOC1 LOC3 Remark 15.000 H-SC L-SC INB.H method 12.000 Error display function Initialization function Unavailable 0.000 1.000 - Caution for using 9.000 It initializes parameter setting state. Press 7.500 0.000 2.000 Display Description 1. Allowable installation environment 6.000 Display value for + + keys simultaneously for over 5 sec. in In this case, any setting If shall be used indoor Altitude Max. 2,000m Pollution Degree 3 Installation Category II Flashes when measured input is exceeded 5.000 0.000 3.000 measured input HHHH RUN status, it returns to factory default value. 3.000 methods display same 2. Use compression terminal(M3, Max. 6.0mm) to connect AC power. the max.allowable input(110%) 3.750 0.000 4.000 Max. 1.000 3. Separate from high-tension line, power line to avoid inductive noise. display value. Flashes when measured input is exceeded Ex) 4. Install power switch or circuit breaker to on / off the power at once. 0.6mm LLLL RUN 3.000 0.000 5.000 the min.allowable input(-10%) 0.2 0.4 0.6 0.8 1V Input value 5. The switch or circuit breaker should be installed nearby users for safety. + + Press Flashes when display input is exceeded setting value 6. Avoid to use the unit nearby machinery with high frequency noise, such as high frequency welder / sewing machine and high capacity SCR D-HH H-SC for over 5 sec. controller etc. Preset output mode [ PA 2: OU1.T / OU2.T mode ] Flashes when display input is exceeded L-SC setting value D-LL IN1 T 7.HHH orLLL is displayed, off the power and check Using line filter Using varistor lines. Flashes when input frequency is exceeded the max. display Mode Output operation Operation Install it closely from DPM F-HH 8. Noise inflowing from power line can cause serious problem HI value of measuring range 110/ NO for D.P.M.(Digital Panel Meter) of AC power. It is hard D.P.M. INPUT 110/ Flashes when it exceeds zero range(99) 220VAC OVER No output to install protection circuit in the small unit even there is D.P.M. OFF LOW 220VAC condenser to avoid noise between lines at primary of power Zero adjusting error is returning to measuring mode after No output OUT1 output YES transformer. Use noise absorber circuit such as line filter, [ ] flashes twice. OVER Earth ground varistor at external lines when abnormal voltage is occurred MODE OUT1.H Refer to Measuring AC frequency functio for frequency Period ON: Display valueOUT1.H by power relay, magnet switch, high frequency equipment are Hysterisis Using double shield wire Using Single shield wire HI measuring range. Period OFF: Display valueOUT1.H-Hys operated in same lines. HI HI OUT1 output ++ 9. Input line : Use shield wire when measured input line is Vin D.P.M. Vin D.P.M. Display cycle delay function [PA 2: DIS.T mode] extended or in a place with noise and open the non-used --LOW LOW Period ON: Display valueOUT1.L terminals. OUT1.L In some applications the measured input may fluctuate which in turn causes the display to fluctuate. By LO Period OFF: Display valueOUT1.L+HYS It may cause malfunction if above instructions are not followed. adjusting the display cycle delay function time in the mode in parameter 2, the operator can adjust OUT1 output DIS.T the display time within a range of 0.1 sec to 5 sec. For example, if the operator sets the display cycle time Period ON: Display valueOUT1.L OUT1.H Main products to 4.0 sec., the display value displayed will be the average input value over 4 sec. and also will show any or Display valueOUT1.H OUT1.L Proximity sensors Counters X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Autonics manufacturer: Other Similar products are found below : BJ1M-DDT-C-P CT6M-2P4 LP-S070-T9D6-C5T PRCM30-15AC PRDCM18-14DN PRDCM30-15DN PRDCML18-14DN PRFT30-10DO- V PRFWT12-2DO-IV PRFWT30-10DO-IV TK4N-14RC BC15-LDT-C-P E50S8-5000-3-T-24 PRD12-8DN PRCM12-2DP SR3-1440R TMHA-42AE TMHE-82RE BJP100-BDT-P BJR1M-DDT-P-F PRFAT12-2DO-V PRFAWT12-2DO-IV PT8-S3DP5 SRH3-4230 SRH3- 4415 SRH3-4430 SRH3-4475 TF33-31H-R CLD2-5 E40H10-250-3-T-24 E40H8-1024-3-T-24 E50S8-100-3-T-24 PRW08-2DP AT8PSN-6 100/120VAC TZ4ST-24R E50S8-1000-3-T-24 BJ3M-PDT-C-P BJN100-NDT-P E40HB8-100-3-T-24 PRDCM12-4DN PRDCM18-7DN PRDCM30-25DN PRDCML12-8DN PRDCML18-7DP PRDCML30-25DN SR1-1250 SR1-1440R SR1-4425 SR3-2430 SR3-2450

Tariff Desc

8543.70.00 Other machines and apparatus Free
13 Signal processors (graphic equalisers, crossovers etc.) 91 Other Free

9027.10.00 Instruments and apparatus for physical or chemical analysis (eg, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes Free

9031.80.00 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS Other instruments, appliances and machines Free

9030.31.00 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations.
Other instruments and apparatus, for measuring or checking voltage, current, resistance or power Multimeters without a recording device Free

8473.30.00 Parts and accessories of the machines of 8471 AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF; MAGNETIC OR OPTICAL READERS, MACHINES FOR TRANSCRIBING DATA ONTO DATA MEDIA IN CODED FORM AND MACHINES FOR PROCESSING SUCH DATA, NOT ELSEWHERE SPECIFIED OR INCLUDED:
.Other 71 No Weighing less than 1kg Free

8537 BOARDS, PANELS, CONSOLES, DESKS, CABINETS AND OTHER BASES, EQUIPPED WITH TWO OR MORE APPARATUS OF 8535 OR 8536, FOR ELECTRIC CONTROL OR THE DISTRIBUTION OF ELECTRICITY, INCLUDING THOSE INCORPORATING INSTRUMENTS OR APPARATUS OF CHAPTER 90, AND NUMERICAL CONTROL APPARATUS, OTHER THAN SWITCHING APPARATUS OF 8517:
8538 PARTS SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE APPARATUS OF 8535, 8536 OR 8537:
8538.10.10 22 For programmable controllers Free
FN9290B-10-06 AC Power Entry Modules 10A DUAL STAGE FLTR FLANGE-MEDICAL image

Jun 14, 2024

In the ever-evolving world of electronics, the importance of reliable and efficient components cannot be overstated. One such critical component is the FN9290B-10-06 AC Power Entry Module, a dual-stage fil

Best Retailer of ARCA 303021 Enclosures, Boxes & Cases image

Oct 18, 2024
The ARCA 303021 Enclosure by Fibox , available through Xon Electronic , is a durable, polycarbonate enclosure designed for industrial applications. With dimensions of 300mm x 300mm x 210mm and an IP66 rating , it offers excellent protection for electrical and electronic components from dust, w
Linear Voltage Regulator Circuit Diagram image

Jul 15, 2024
Learn all about linear voltage regulator circuits in this comprehensive guide. Understand the components, working principles, practical considerations, and applications of linear voltage regulators like the LM7805. Discover how to design efficient power supplies for your electronic projects with de
CC0603KRX7R7BB105 Multilayer Ceramic Capacitor (MLCC): Applications, Uses image

Oct 25, 2024
The CC0603KRX7R7BB105 Multilayer Ceramic Capacitor (MLCC) by Yageo is a compact, 1.0µF, 16V SMD/SMT capacitor ideal for applications requiring stability and low ESR, such as power supply filtering, RF signal conditioning, and decoupling in microcontrollers. With an X7R dielectric, it maintains ca

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing. All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted AS9120 Certified