1694A.00153 Belden

1694A Coax - Precision Video Cable for Analog and Digital For more information please call 1-800-Belden1 See Put-ups and Colors Description: 18 AWG .040 solid bare copper conductor, gas-injected foam HDPE insulation, Duofoil and a 95% tinned copper braid shield, PVC jacket. PHYSICAL CHARACTERISTICS: CONDUCTOR: Number of Coax 1 Total Number of Conductors 1 RG Type 6/U AWG 18 Stranding Solid Conductor Diameter .040 in. Conductor Material BC - Bare Copper INSULATION: Insulation Material Gas-injected FHDPE - Foam High Density Polyethylene Insulation Diameter .180 in. OUTER SHIELD: Outer Shield Material Trade Name Duofoil Outer Shield Type Tape/Braid Outer Shield Material : Layer Number Trade Name Type Material % Coverage (%) 1 Duofoil Tape Aluminum Foil-Polyester 100 Tape-Aluminum Foil 2 Braid TC-Tinned Copper 95 Outer Shield %Coverage 100 % OUTER JACKET: Outer Jacket Material PVC - Polyvinyl Chloride OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .275 in. MECHANICAL CHARACTERISTICS: Operating Temperature Range -30C To +75C UL Temperature Rating 75C Page 1 of 41694A Coax - Precision Video Cable for Analog and Digital Bulk Cable Weight 40 lbs/1000 ft. Max. Recommended Pulling Tension 69 lbs. Min. Bend Radius (Install) 2.75 in. APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: APPLICABLE STANDARDS: NEC/(UL) Specification CMR CEC/C(UL) Specification CMG FLAME TEST: UL Flame Test UL1666 Vertical Shaft CSA Flame Test FT4 SUITABILITY: Suitability - Indoor All colors Suitability - Outdoor Black only Suitability - Aerial Black only, when supported by a messenger wire Suggested Connectors AMP 221185-1 Dual Crimp Gold Pin BNC (75 Ohms) Amphenol 31-70000 Dual Crimp Gold Pin BNC (75 Ohms) Kings 2065-10-9 Dual Crimp Gold Pin (75 Ohms) Trompeter UPL220-20 Dual Crimp Gold Pin BNC (75 Ohm) ADC BNC- 1694D Dual Crimp Gold Pin BNC (75 Ohm) PLENUM/NON-PLENUM: Plenum (Y/N) N Non-Plenum Number 1695A ELECTRICAL CHARACTERISTICS: Nom. Characteristic Impedance 75 +/- 1.5 Ohms Nom. Inductance 0.106 H/ft Nom. Capacitance Conductor to Shield 16.2 pF/ft Nominal Velocity of Propagation 82 % Nominal Delay 1.24 ns/ft Nom. Conductor DC Resistance 20 Deg. C 6.4 Ohms/1000 ft Nominal Outer Shield DC Resistance 2.8 Ohms/1000 ft Minimum Structural Return Loss : Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) Minimum Structural Return Loss (dB) 5 850 23 851 3000 21 Nom. Attenuation : Page 2 of 4