Bel Power Solutions DP7130G is an intelligent, fully programmable step-down point-of-load DC- DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power-On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of the DP7130G are programmable via Bel Power 2 Input voltage range: 8 V14 V Solutions I C based GUI. All settings can be changed by a user at any time during product Output voltage range: 0.7 V3.6 V at 0 30 A development and service. Once programmed, the Programmable dynamic output voltage DPM remembers all settings and configures the positioning for better load transient response DP7130G through a self-clocking single wire 500 KHz switching for high efficiency communication bus. Flexible Fault Response features FLASH memory in the DPM allows changes to be Multiple turn-on/off slew rates and delays made without the need to solder or rewire the Digital Filter Compensation regulator. Synchronous operation with other supplies Real time performance monitoring GUI based configuration for short development time Small footprint SMT package: 8 x 32 x15 mm Approved to the latest edition and amendment of ITE Safety standards, UL/CSA 60950-1 and IEC60950-1 North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00260 AB DP7130G DP 71 30 G zz OUTPUT RoHS 1 PRODUCT FAMILY SERIES DASH PACKAGING OPTIONS CURRENT COMPLIANCE R100 - 100pc T&R G - RoHS compliant d-pwer Intelligent dPOL Converter 30 A Sample quantity orders have for all six substances no suffix. Example: DP7130G-R100: A 100-piece reel of RoHS compliant dPOL converters. Each dPOL converter is labelled DP7130G. Reference Documents DM7300 Digital Power Manager Data Sheet DM7300 Digital Power Manager Programming Manual 2 Bel Power Solutions I C Graphical User Interface 2 DM00056-KIT USB to I C Adapter Kit. User Manual Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long term reliability, and cause permanent damage to the converter. PARAMETER CONDITIONS / DESCRIPTION MIN MAX UNITS Inductor or Printed Circuit Board Input Voltage applied -40 125 C (PCB) Temperature Input Voltage 250 ms Transient 15 VDC Output Current (See Output Current De-rating Curves) -24 30 ADC Specifications apply at the input voltage from 8 V to 14 V, output load from 0 to 30 A, ambient temperature from -40C to 85C. Test conditions include an output filter with 5 x 470 F 12m solid electrolytic, plus 2 x 22 F X7R ceramic output capacitors, unless otherwise noted. 3.1 INPUT SPECIFICATIONS PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Input Voltage (VIN) 8.0 14.0 VDC Input Current (at no load) V = 14.0 V, V = 3.3 V 132 mADC IN OUT Ramping Up 7.5 VDC Undervoltage Lockout Ramping Down 5.0 5.0 VDC 1 Packaging option is used only for ordering and not included in the part number printed on the dPOL converter label. +1.866.513.2839 tech.support psbel.com belpowersolutions.com 2015 Bel Power Solutions, Inc. BCD.00260 AB