3313J-2-503E Bourns

2 2 Features n Plastic housing for RF applications n Surface Mount 3 mm Square Single-Turn Cermet / Sealed n Reverse pin layout option (Model 3313X) n Compatible with surface mount n RoHS compliant* manufacturing processes n Halogen free models available (not recommended for wave soldering) n AEC-Q200 Qualified Grade 1 n Rotor stop for in-circuit adjustment n 100 cycle rotational and seal life 3313 - 3 mm Trimpot Trimming Potentiometer Electrical Characteristics Product Dimensions Standard Resistance Range 3313J-1 3313S-1 Position Rotor As Shown 3.2 +0.4/-0.2 2 ......................10 ohms to 2 megohms Within 11 Of Centerline (.126 +.016/-.008) Of Terminal 2 (see standard resistance table) ADJ. SLOT 3.61 .20 0.52 3.5 0.2 Resistance Tolerance ........... 20 % std. WIDE (.142 .008) (.020) (.138 .008) 3.02 End Resistance ..... 1 % or 3 ohms max. 1.93 ADJ. SLOT LONG X (.119) (whichever is greater) (.076) .52 0.03 WIDE 0.51 (.020 .001) Contact Resistance Variation 3 1 DEEP X (.020) 1.93 0.03 .................................... 3 % or 3 ohms X LONG (.076 .001) 3313J-2 3.2 +0.4/-0.2 Adjustability 2 .51 0.06 X (.126 +.016/-.008) DEEP Voltage Divider ........................ 0.1 % (.020 .002) ADJ. CROSS SLOT 3 2 1 Rheostat .................................. 0.2 % 3.5 0.2 0.45 WIDE Resolution ................................... Infinite (.138 .008) (.018) Insulation Resistance ...............500 vdc. 0.51 3313S-2 Position Rotor As Shown X DEEP (.020) Within 11 Of Centerline 100 megohms min. 3 1 1.68 Of Terminal 2 1.42 Dielectric Strength 3.61 (.066) (.056) 1.1 0.1 Sea Level................................ 500 vac (.142) (.043 .004) 3.02 70,000 Feet ............................ 350 vac ADJ. SLOT (.119) 1.47 0.15 .45 0.03 Adjustment Angle .................. 220 nom. WIDE SOLDERABLE (.058 .006) (.018 .001) AREA 0.5 1.93 0.03 1.50 0.15 Environmental Characteristics X LONG (.020) (.076 .001) (.059 .006) Max. Soldering Exposure 2 PLCS 3 PLCS51 0.06 X DEEP (.020 .002) .............................250 C/10 seconds 2.3 0.2 3 2 1 0.66 0.10 Power Rating (200 volts max.) (.091 .008) 2 PLCS 3.71 (.026 .004) 70 C ..................................0.125 watt 2.77 (.146) 2.2 0.2 125 C .......................................0 watt (.109) (.087 .008) Operating Temp. Range ...............................-55 C to +125 C 5.35 0.15 Temperature Coefficient (.211) (.006) 1.30 .................. 100 ohms 150 ppm/C (.051) ................... >100 ohms 100 ppm/C 0.15 0.03 RECOMMENDED LAND PATTERN Seal Test ..85 C Fluorinert /60 seconds (.006 .001) 1.6 Humidity ...... MIL-STD 202, Method 106 1.6 (.063) 0.71 0.20 (no vibration) TRS 3 % TYP (.063) (.028 .008) IR 10 megohms 1.15 TYP (.045) 4.5 Vibration .....20 G TRS 1 % VRS 1 % (.177) Shock .......100 G TRS 1 % VRS 1 % 0.65 (.026) Load Life ...............................1000 hours 1.60 70 C Rated Power TRS 3 % (.063) 1.1 1.1 2.39 Rotational Life ..... 100 cycles TRS 3 % (.043) (.043) (.094) Thermal Shock ..........................5 cycles 0.6 RECOMMENDED LAND PATTERN TRS 2 % VRS 1 % (.024) 0.6 (.024) 1.57 1.57 Physical Characteristics (.062) 3 PLCS (.062) Mechanical Angle ................. 250 nom. 3313X-1 3313X-2 (Reverse (Reverse Torque ...............................50 g-cm max. 2.62 Pin Pin (.103) Stop Strength ..................200 g-cm min. Layout) Layout) Pushover Strength (S Style only) ........ 1.6 Kilograms (3.5 lbs) minimum 1.12 2 PLCS 2.39 (.044) Flammability ..........................U.L. 94V-0 1 3 1 3 (.094) Weight ......................... Approx. 0.01 oz. Marking ........................ Resistance code MM WIPER DIMENSIONS: 2 (INCHES) and date code 0.25 Wiper ...............50 % (Actual TR) 10 % CCW CW 1 3 TOLERANCES: EXCEPT WHERE NOTED (.010) Standard Packaging CLOCKWISE J, X Styles (MSL-1) ....1000 pcs./7 reel S Style (MSL-1) .......... 200 pcs./7 reel * RoHS Directive 2015/863, Mar. 31, 2015 and Annex. Adjustment Tool ..............................H-91 ** Halogen free product is identified by a black housing color. Bourns follows the prevailing definition of halogen free in the industry. Bourns considers a product to be halogen fre eif (a) the Bromine (Br) content is 900 ppm or less (b) the Chlorine (Cl) content is 900 ppm or less and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Fluorinert is a registered trademark of 3M Co. Specifications are subject to change without notice. WARNING Cancer and Users should verify actual device performance in their specific applications. Reproductive Harm The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of www.P65Warnings.ca.gov this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANT **HALOGEN FREE MODELS AVAILABLE *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT*Features (Continued) n See processing information on RoHS compliant surface mount trimmers n For trimmer applications/processing guidelines, click here 3313 - 3 mm Trimpot Trimming Potentiometer Standard Resistance Table 3313J, X Packaging Specifications 3313S Packaging Specifications Resistance Part Marking Resistance (Ohms) Code Code 3.9 0.10 5.80 0.10 .40 10 A1 100 2.50 0.10 (.154 .004) (.228 .004) MAX. (.016) 20 21 200 (.098 .004) 50 51 500 100 A2 101 5 2 .30 0.10 200 22 201 4.20 .020 (.012 .004) 500 52 501 (.165 .008) 5.50 0.05 1,000 A3 102 7.50 0.10 (.216 .002) 4.0 0.10 2,000 23 202 (.295 .004) (.157 .004) 5,000 53 502 2.00 .010 10,000 A4 103 (.079 .004) 20,000 24 203 50,000 54 503 12.00 0.10 2.0 0.10 100,000 A5 104 (.472 .004) 4.00 .10 (.079 .004) 200,000 25 204 (.157 .004) 500,000 55 504 1.5 .10 1,000,000 A6 105 3.65 0.10 (.059 .004) 2,000,000 26 205 (.144 .004) 1.5 .10 DIA. 1.5 0.20 Popular distribution resistance values listed in (.059 .004) (.059 .008) boldface. Special resistances available. 1.5 0.20 DIA. 1.75 0.10 (.059 .008) (.069 .004) 12.0 0.20 4.10 0.20 How To Order (.472 .008) (.161 .008) TAPE 16.00 .30 3313 J - 1 - 502 E (.630 .012) TAPE 177.8 2.03 Model 22.4 18.39 DIA. MAX. (7.000 .080) (.882) (.724) 177.8 2.03 DIA. Style MAX. (7.000 .080) Standard or Modified Product Indicator -1 = Standard Single Slot -2 = Standard Cross Slot EQUAL -GK2 = Halogen Free Single Slot SPACED EQUAL 50.0 (Black Housing Color) 1.5 SPACED (1.969) -GL5 = Halogen Free Cross Slot 50.0 (.059) 1.5 MIN. (1.969) (Black Housing Color) 3 PLCS (.059) MIN. MIN. 3 PLCS Resistance Code MIN. 20.2 13.0 0.2 Embossed Tape DIA. 12.40 + 2.00/ -.000 (.795) (.512 .008) 20.2 13.00 0.20 1000 pcs. / 7 Reel (J, X Styles - MSL-1) DIA. MIN. (.488 + .078/ -.000) MIN. 16.40 + 1.78/ -.000 (.795) (.512 .008) 200 pcs. / 7 Reel (S Style - MSL-1) (.646 + .070/ -.000) REEL Meets EIA 481 REEL Tape and reel material meets Antistatic ANSI/ ESD 5541-2003 packaging standards. MM DIMENSIONS: (INCHES) 0.25 TOLERANCES: EXCEPT WHERE NOTED (.010) Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus bourns.com Europe: Tel: +36 88 885 877 Email: eurocus bourns.com The Americas: Tel: +1-951 781-5500 Email: americus bourns.com www.bourns.com REV. 08/19 Trimpot is a registered trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.