ACPL-M484-500E

ACPL-M484/P484/W484 Positive Logic High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Description Features The ACPL-M484/P484/W484 fast speed optocoupler con- Positive output type (totem pole output) tains a AlGaAs LED and photo detector with built-in Schmitt Truth Table Guaranteed: Vcc from 4.5 V to 30 V trigger to provide logic-compatible waveforms, elimi- Performance Specified for Common IPM Applications nating the need for additional wave shaping. The totem Over Industrial Temperature Range. pole output eliminates the need for a pull up resistor and allows for direct drive Intelligent Power Module or gate Short Maximum Propagation Delays drive. Minimized propagation delay difference between Minimized Pulse Width Distortion (PWD) devices makes these optocouplers excellent solutions for Very High Common Mode Rejection (CMR) improving inverter efficiency through reduced switching dead time. Hysteresis Available in SO-5 (ACPL-M484) and Stretched SO-6 Applications package (ACPCL-P484/W484). IPM Interface Isolation Package Clearance/Creepage at 8 mm (ACPL-W484) Isolated IGBT/MOSFET Gate Drive Safety Approval: AC and Brushless DC Motor Drives UL Recognized with 5000 V (ACPL-W484) for rms 1 minute per UL1577. Industrial Inverters CSA Approved. General Digital Isolation IEC/EN/DIN EN 60747-5-5 Approved with V = IORM Functional Diagram 567 V for ACPL-M484 and V = 891 V for peak IORM peak ACPL-P484 and V = 1140 V for ACPL-W484, IORM peak ACPL-M484 under option 060. Anode 1 6 V CC Note: A 0.1 F bypass Specifications 5 V capacitor must be con- O nected between pins Cathode 3 4 Ground SHIELD Wide operating temperature range: -40 C to 105 C Vcc and Ground. Maximum propagation delay t / t = 150/120 ns PHL PLH Truth Table Maximum Pulse Width Distortion (PWD) = 90 ns ACPL-P484 & ACPL-W484 (Positive Logic) Propagation Delay Difference Min/Max = -130/130 ns Anode 1 6 V CC LED V O Wide Operating V Range: 4.5 to 30 Volts CC N.C. 2 5 V O ON HIGH 30 kV/s minimum common mode rejection (CMR) at Cathode 3 4 Ground OFF LOW SHIELD V = 1000 V CM Truth Table Guaranteed: Vcc from 4.5 V to 30 V CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information ACPL-M484/P484/W484 is UL recognized with 3750/3750/5000 Vrms/1 minute rating per UL 1577. Option IEC/EN/DIN Part number RoHS Compliant Package Surface Mount Tape & Reel EN 60747-5-5 Quantity ACPL-M484 -000E SO-5 X 100 per tube -500E X X 1500 per reel -060E X X 100 per tube -560E X X X 1500 per reel ACPL-P484 -000E Stretched X 100 per tube ACPL-W484 SO-6 -500E X X 1000 per reel -060E X X 100 per tube -560E X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-P484-560E to order product of Stretched SO-6 Surface Mount package in Tape and Reel packaging with IEC/EN/ DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: ACPL-P484-000E to order product of Stretched SO-6 Surface Mount package in Tube packaging and RoHS compliant. Example 3: ACPL-M484-000E to order product of SO-5 Surface Mount package in Tube packaging and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. 2