Data Sheet ASMM-Cx03-xxxxx PLCC-2 Surface Mount LED Description Features The Broadcom ASMM-Cx03 Surface Mount LED is Industry-standard PLCC-2 package. packaged in the industry-standard PLCC-2 package and High-reliability LED package with enhanced silicone has high-reliability performance designed to work under a resin encapsulation. wide range of environmental conditions. This high-reliability High brightness using AlGaAs, GaP, and AllnGaP dice feature makes them ideally suited to be used for wide range technologies. of applications. Available in full selection of colors. Wide angle viewing angle at 120. The wide viewing angle at 120 makes these LEDs ideally JEDEC MSL 3. suited for panel, push button, or general backlighting in office equipment, industrial equipment, and home Applications appliances. The flat top emitting surface makes it easy for Electronic signs and signals. these LEDs to integrate with light pipes. With the built-in Office automations, home appliances, and industrial reflector enhancing the light output intensity, these LEDs are equipment. also suitable to be used as LED pixels in indoor electronic Front panel backlighting signs. Push button backlighting To facilitate easy pick and place assembly, the LEDs are Display backlighting packed in tape and feel form. Every reel is shipped in single Scanner lighting intensity and color bin to provide close uniformity. CAUTION This LED is ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to application note AN-1142 for additional details. Broadcom ASMM-Cx03-xxxxx-DS107 March 26, 2021ASMM-Cx03-xxxxx Data Sheet PLCC-2 Surface Mount LED Figure 1: Package Drawing 2.8 1.9 2.2 CATHODE MARK (ANODE MARK FOR AlGaAs AND ASMM-CR03-Bxxx2) NOTE: 1. Dimensions in bracket are for reference only. 2. Tolerance is 0.20 mm unless otherwise specified. 3. Encapsulation = silicone. 4. Terminal finish = silver plating. 5. All dimensions in millimeters (mm). Broadcom ASMM-Cx03-xxxxx-DS107 2 3.5 3.2 (2.4) 0.8