Data Sheet HCPL-7723/0723 50-MBd 2-ns PWD High-Speed CMOS Optocoupler Description Features +5V CMOS compatibility Available in either 8-pin DIP or SO.8 package style High speed: 50 MBd min. respectively, the Broadcom HCPL-7723 or HCPL-0723 2-ns max. pulse width distortion optocoupler utilize the latest CMOS IC technology to 22-ns max. propagation delay achieve outstanding speed performance of minimum 16 ns max. propagation delay skew 50 MBd data rate and 2-ns maximum pulse width distortion. 10 kV/s min. common mode rejection Basic building blocks of HCPL-7723/0723 are a CMOS LED 40 to 85C temperature range driver IC, a high speed LED and a CMOS detector IC. A Safety and regulatory approvals: CMOS logic input signal controls the LED driver IC, which UL recognized: supplies current to the LED. The detector IC incorporates an 5000 V for 1 min. per UL1577 for HCPL-7723 rms integrated photodiode, a high-speed transimpedance for option 020 amplifier, and a voltage comparator with an output driver. 3750 V for 1 min. per UL1577 for HCPL-0723 rms CSA component acceptance notice 5 IEC/EN/DIN EN 60747-5-5 V = 630 V for HCPL-7723 option 060 iorm peak V = 567 V for HCPL-0723 option 060 iorm peak CAUTION It is advised that normal static precautions be Applications taken in handling and assembly of this Digital fieldbus isolation: CC-Link, DeviceNet, Profibus, component to prevent damage and/or SDS, Isolated A/D or D/A conversion degradation, which may be induced by ESD. Multiplexed data transmission The components featured in this data sheet are High-speed digital input/output not to be used in military or aerospace Computer peripheral interface applications or environments. Microprocessor system interface Broadcom AV02-0643EN September 26, 2017HCPL-7723/0723 Data Sheet 50-MBd 2-ns PWD High-Speed CMOS Optocoupler Truth Table Functional Diagram V Input V Output LED1 I O 1 8 **V V ** DD1 DD2 HOFF H LONL V 2 7 NC* I I O 3 6 NC* V O LED1 GND 4 5 GND 1 2 SHIELD * PIN 3 IS THE ANODE OF THE INTERNAL LED AND MUST BE LEFT UNCONNECTED FOR GUARANTEED DATASHEET PERFORMANCE. PIN 7 IS NOT CONNECTED INTERNALLY. ** A 0.01 to 0.1 F BYPASS CAPACITOR MUST BE CONNECTED AS CLOSE AS POSSIBLE BETWEEN PINS 1 AND 4, AND 5 AND 8. Package Outline Drawings HCPL-7723 8-Pin DIP Package 9.65 0.25 7.62 0.25 (0.380 0.010) (0.300 0.010) 8 7 6 5 6.35 0.25 DEVICE PART NUMBER (0.250 0.010) AVAGO TEST RATING CODE A NNNN Z UL LOGO LEAD-FREE YYWW DATE CODE SPECIAL PROGRAM CODE EEE P LOT ID PIN 1 1 2 3 4 1.78 (0.070) MAX. 1.19 (0.047) MAX. + 0.076 0.254 5 TYP. - 0.051 + 0.003) 3.56 0.13 (0.010 4.70 (0.185) MAX. - 0.002) (0.140 0.005) 0.51 (0.020) MIN. DIMENSIONS IN MILLIMETERS (INCHES). 2.92 (0.115) MIN. *MARKING CODE LETTER FOR OPTION NUMBERS = OPTION 020 = OPTION 060 1.080 0.320 0.65 (0.025) MAX. OPTION NUMBERS 300 AND 500 NOT MARKED. (0.043 0.013) 2.54 0.25 NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. (0.100 0.010) Broadcom AV02-0643EN 2