CLM-DS05 LMR2 Rev 3 e
Product family data sheet
Cree LMR2 LED Module
Cree LED modules provide lighting designers and manufacturers with simple, easy-to-adopt LED lighting solutions that reduce fixture
development time and speed time-to-market. The Cree LMR2 LED module is the ideal choice for enabling rapid fixture development
where bright, beautiful, long-life lighting is required. The LMR series of modules incorporates a compact system of integrated driver
electronics, optics and primary thermal management together with 80- and 90-CRI options to address a wide range of residential and
commercial lighting applications. This versatile LED lighting module jump starts the design process for 3-8 (76-203mm) downlights,
wall sconces or pendant lights.
BEnEfits foR LuMinaiRE DEsignERs
Faster time-to-market and lower system cost with complete, compact
light source solution
Reduced development time with concurrently designed and tested
optics, driver electronics, and primary thermal management
Wide variety of design applications enabled with 2700K, 3000K, 3500K
and 4000K correlated color temperatures
Industry-leading 5-year limited warranty backed by patented, reliable
Cree LeD technology
Rapid regulatory approval and voluntary qualification of final luminaire
enabled by:
UL approval (120V)
California Title 24 compliance (120V)
LeD LM-80 data for US eNeRGY STAR
Compliance with CE and other international standards (230V)
BEnEfits foR EnD usERs
Two color rendering options:
90 CRI for retail, museums and hospitality
80 CRI for general illumination
Significant energy savings over traditional lighting through superior
efficacy up to 72lm/W
visually comfortable appearance whether the module is powered on
or off
Designed to last 35,000 hours at L
70
Consistent light quality over time and temperature
Dimming down to 5% of rated light output using standard incandescent
and electronic low-voltage dimmers
No Uv or mercury
units: mm
Copyright 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and TrueWhite are Cree, Inc.
registered trademarks and the Cree logo and the Cree TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR is a registered trademark 4600 Silicon Drive
of the U.S. Environmental Protection Agency. UL and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names Durham, NC 27703
are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. USA Tel: +1.919.313.5300
www.cree.com/modulesLMR2 LED MoDuLE
ChaRa CtERistiCs - 650 LuMEns ( tRuEWhitE )
nominal Module input Voltage
CCt input Power Power
Luminous flux CRi Efficacy (V)/f requency Dimming order Code
(K) (W) f actor
(lm)* (lm/W) (z)**h
10 65 120/60 > .80 TRIAC LMR020-0650-40F9-10100TW
650 4000 > 90
10.5 62 230/50 > .90 TRIAC LMR020-0650-40F9-20100TW
10 65 120/60 > .80 TRIAC LMR020-0650-35F9-10100TW
650 3500 > 90
10.5 62 230/50 > .90 TRIAC LMR020-0650-35F9-20100TW
10 65 120/60 > .80 TRIAC LMR020-0650-30F9-10100TW
650 3000 > 90
10.5 62 230/50 > .90 TRIAC LMR020-0650-30F9-20100TW
10 65 120/60 > .80 TRIAC LMR020-0650-27F9-10100TW
650 2700 > 90
10.5 62 230/50 > .90 TRIAC LMR020-0650-27F9-20100TW
* Luminous flux measured at Tc = 55C
** Input ranges are 110130V/60Hz and 220240V/50Hz
Maximum power = 12.1W
Note: Cree maintains a tolerance of 7% on flux and power measurements
ChaRa CtERistiCs - 750 LuMEns
nominal Module input Voltage
CCt input Power Power
Luminous flux CRi Efficacy (V)/f requency Dimming order Code
(K) (W) f actor
(lm)* (lm/W) (hz)**
750 4000 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-40F8-10100eW
750 3500 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-35F8-10100eW
750 3000 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-30F8-10100eW
750 2700 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-27F8-10100eW
* Luminous flux measured at Tc = 55C
** Input range is 110130V/60Hz
Maximum power = 13.5W
Note: Cree maintains a tolerance of 7% on flux and power measurements
ChRo MatiCity
The Cree LMR2 LED module provides high color consistency around the specified color temperature. Individual LEDs are tested and
matched in order to meet our designed chromaticity specification.
Secondary optics can be added to the module but will reduce light output and may also alter the color characteristics of the final luminaire
design.
Copyright 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and TrueWhite are registered trademarks and the Cree logo and the Cree
TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. UL and the UR logo are registered trademarks of UL LLC. Other
trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
2