26.5 GHZ HAND FORMABLE .086 COAX CABLES 50 Ohm DC-26.5 GHz Hand Formable Coaxial Cables Features: Electrical Specifications: Impedance: 50 Ohms Center Conductor: Silver-plated copper wire Frequency: DC to 26.5 GHz Outer Braid: Tin-soaked copper braid, 100% coverage Insertion Loss: 1.40 dB/ft at 26.5 GHz Insulation: PTFE (Polytetrafluoroethylene) dielectric VSWR: <1.3, DC to 26.5 GHz Cable Outer Diameter: 0.086 (2.2mm) Nominal Capacitance: 29 pF/ft Connectors: Stainless Steel Velocity of Propagation: 70% Center Pin: Gold-plated brass Shield Effectiveness: Greater than 100 dB Operating Temperature: -40C to +85C Attenuation (dB/ft): 0.16 Typical at 0.5 GHz Minimum Bend Radius: 0.125 (3.17mm) single bend *connector loss not included 0.22 Typical at 1 GHz 0.99 (25mm) multiple bends (refer to actual cable 0.80 Typical at 10 GHz Electrically Matched Pairs Available plot below) 1.13 Typical at 18 GHz 1.40 Typical at 26.5 GHz PN: CCSMA26.5-MM-086-12 INSERTION LOSS Avg Power in (Watts): 900 100 MHz 0.00 *as specified at 20C 200 1 GHz -0.20 50 10 GHz Applications: Jumpers -0.40 Instrumentation -0.60 High Frequency Interconnects -0.80 -1.00 -1.20 -1.40 -1.60 0 2 4 6 8 10 12 14 16 18 20 22 24 26 SMA / SMA Straight/Straight Part Number Description Length CCSMA26.5-MM-086-3 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 3 CCSMA26.5-MM-086-4 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 4 CCSMA26.5-MM-086-5 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 5 CCSMA26.5-MM-086-6 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 6 CCSMA26.5-MM-086-7 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 7 CCSMA26.5-MM-086-8 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 8 CCSMA26.5-MM-086-10 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 10 CCSMA26.5-MM-086-12 .086 Hand Formable Coax Cable, SMA Male/Male, Straight/Straight 12 Rev.: B Date: 04-07-1426.5 GHZ HAND FORMABLE .086 COAX CABLES Data plots contained within this specification are generated from actual production cable assemblies. This data represents the typical performance that can be expected from each cable assembly. The data is plotted from raw data without modification (ie: Smoothing or Averaging.) PN: CCSMA26.5-MM-086-3 PN: CCSMA26.5-MM-086-3 VSWR (S11) INSERTION LOSS (S12) 1.40 0.00 1.35 -0.20 1.30 -0.40 1.25 -0.60 1.20 -0.80 1.15 -1.00 1.10 -1.20 1.05 -1.40 1.00 -1.60 0 2 4 6 8 10 12 14 16 18 20 22 24 26 0 2 4 6 8 10 12 14 16 18 20 22 24 26 PN: CCSMA26.5-MM-086-3 PN: CCSMA26.5-MM-086-3 INSERTION LOSS (S21) VSWR (S22) 0.00 1.40 -0.20 1.35 -0.40 1.30 -0.60 1.25 -0.80 1.20 -1.00 1.15 -1.20 1.10 -1.40 1.05 -1.60 1.00 0 2 4 6 8 10 12 14 16 18 20 22 24 26 0 2 4 6 8 10 12 14 16 18 20 22 24 26 Rev.: B Date: 04-07-14