System On Module iW-RainboW-G24M Arria 10 SoC Module iWaves Arria 10 SoC System on Module is based on the Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with ECC and 64-bit DDR4 support for FPGA. All the IOs and high speed transceiver blocks will be available on the SOM board to board connectors. APPLICATIONS: Test and measurement equipment, Control and intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment. iW-RainboW-G24M SPECIFICATIONS HIGHLIGHTS Arria10 SOC & FPGA device compatibility : SOC Arria10 SoC/FPGA Dual 240 Pin Board to Board Connector: SX270, SX320, SX480, SX570, Sx660 Dual Core, Cortex - A9 CPU 1.5GHz Arria10 SoC HPS IO interfaces: SX480 (10AS048) FPGA Fabric Gigabit Ethernet x 1 Port GX270, GX320, GX480, GX570, Gx660 Memory USB 2.0 OTG x 1 Port 2GB DDR4 with ECC for HPS SD (4bit) x 1 Port (optional) 4GB DDR4 for FPGA 4GB DDR4 for FPGA SPI x 1 Port 24 high speed transceivers 17.4Gbps Micro SD for HPS boot I2C x 1 Port 8GB eMMC Flash for HPS boot (Optional) HPS Dedicated UART Console 48/96 LVDS from BANK 3B & 3C QSPI Flash for FPGA GPIOs-14 Nos Communication: 93 SE from BANK 2A & 3A Arria10 SoC FPGA IO interfaces: 10/100/100 Ethernet PHY For HPS speed transceivers 24 high - Industrial grade availability 48/96 LVDS from BANK 3B & 3C USB2.0 transceiver for HPS Power Supply: 93 SE from BANK 2A & 3A 10+ Years availability 5V through SOM B2B connector 2 Headers: HPS/FPGA JTAG, FPGA AS headers Temperature support: OS Support: Linux 4.9.78 40 C to +85 C Industrial Form Factor: 95mm x 75mm - www.iwavesystems.comTransceiver PHY FPGA IOs Transceiver PHY Arria 10 SoC SOM - BLOCK DIAGRAM 5V Power IN Power Power to (Optional) Regulators Hard Processor System Peripherals TM (Dual ARM Cortex - A9) UTMI USB OTG USB2.0 DDR4 - 2GB PHY DDR4 (32bit) USB1 (Upgradable) Gigabit SDRAM RGMII Ethernet Ethernet Controller EMAC1 DDR4 ECC (8bit) PHY (Bank 2J & 2k) DDR4 (ECC) Debug UART HPS-D-UART SD (4bit) MicroSD SDMMC Connector SPI SPIM0 eMMC eMMC - 8GB SOM Board I2C0 eMMC to Board (Optional) I2C0 Connector2 GPIOs (Upto 14nos) (240pin) GPIOs AS Interface (Optional) High Speed Transceiver Arria 10 SX/GX (2 Channels from Bank 1E) FPGA High Speed Transceiver (6 Channels) High Speed Transceiver (6 Channels) Bank 1C SOM Board Bank 1F High Speed Transceiver (6 Channels) to Board Bank 1D Connector1 FPGA IOs(24LVDS/48SE) High Speed Transceiver (4 Channels) Bank 3B (240pin) Bank 1E FPGA IOs(24LVDS/48SE) Bank 3C FPGA IOs(46SE) Bank 2A Bank 3D, DDR4 (64bit) FPGA IOs(47SE) 3E,3F DDR4 - 4GB Bank 3A FPGA/HPS JTAG AS Interface JTAG Header FPGA AS Active Serial JTAG Header 5V FAN Header Configuration Flash-256MB Note: HPS (Hard Processing System) is supported only in Arria10 SX devices. All IOs in SOM Expansion connectors are 1.8V tolerant Ios. Bank 3B, 3C, 3A supports variable IO level setting from PMIC (1.8V, 1.5V, 1.35V, 1.2V). Each FPGA IO Bank (2A,3A,3B,3C) which goes to Expansion connectors support two General Purpose Clock Input (1 in 2A) & two General Purpose Clock Output (LVDS/SE). Since 3D,3E & 3F banks are available only in some version of Arria10 parts, FPGA DDR4 (64bit) can be supported only where these banks supported devices are used. OS SUPPORT DELIVERABLES OPTIONAL KITS/Modules CUSTOM DEVELOPMENT Arria 10 SoC Development Kit Linux 4.9.78 Arria 10 SoC SOM BSP Development/OS Porting Board Support Package Custom SOM/Carrier Development User Manual Custom Application/GUI Development Design Review and Support ple SOMs based on ARM NXP, Intel Atom, Marvell and TI Processors. iWave System has won the confidence of its c *Optional items not included in the standard deliverables. Ordering the Arria 10 SoC SOM Note: iWave reserves the right to change these specications without notice as part of iWaves The SOM Module can be ordered online from the iWave Website continuous effort to meet the best in breed specication. The registered trademarks are proprietary