COMPONENTS PRODUCT INFORMATION CONNECTOR GSM 11.11 Standard Compliant Plug-in SIM Card Connector NEW MB-0057-4 SF7 Series December 2001 The SF7 Series is a hinge-type connector supporting the GSM 11.11 standard compliant Plug-in SIM Card used for the European digital mobile phone GSM system. ( SIM: subscriber identity module) Features * Supports GSM 11.11 standard compliant Plug-in SIM Card for European digital mobile phones. * Molded component has a card mis-insertion prevention mechanism. * Adsorption area for SMT and automated mounting. Supply with em bossed tape available. * To complete friction lock, insert the card into the cover, then slide the cover. Easy operation hinge slide lock mechanism. * The cover can be full-flat (bendable from 0 degree to 180 degrees) so that the connector can fit any design of mobile phone. Type without card detection switch *2.3mm height, 30mm long, 17.2mm width low-profile and compact type * Configured with positioning bosses and board mis-insertion prevention mechanism using different diameter bosses. Available with and without positioning boss. Type with card detection switch * 2.5mm height, 30mm long, 17.2mm width low-profile and compact type * Card insertion detection switch system is a highly reliable complete insertion detecting function that will operate only when the card is inserted and completely installed by the sliding cover. *Without positioning boss. General Specifications Without card detection switch With card detection switch No. of Contacts 6 pos. 8 pos. Contact resistance Signal 100m ohm max. Signal 100 m ohm max. Switch 200 m ohm max. Withstanding voltage 500 VAC per minute 500 VAC per minute Operating temperature -40C~+90C -40C~+90C Rated current 10uA~1A 10uA~1A Signal C/T: Min. 1000M ohm Signal C/T: Min. 1000M ohm Insulation resistance at DC500V at DC500V Switch C/T: Min. 1000M ohm at DC100V Life time 5000 times 5000 times 1/4MB-0057-4 Materials and Finishes Components Materials/Finishes Without card detection switch With card detetion switch Contact Copper alloy Copper alloy Contact: Au plating over Ni Contact: Au plating over Ni Terminal: Au flash over Ni Terminal: Au flash over Ni Housing Glass filled LCP Glass filled LCP Cover Glass filled LCP Glass filled LCP Switch contact Copper alloy Contact: Au plating over Ni Terminal: Au flash over Ni Actuater Stainless Ordering Information SF7 W 006S 1 A E**** Series Hinge type Emboss product 1000: without card detection switch SMT mounting 900: with card detection switch Modification No. of contacts 6 pos.: Contact finish without card detection switch Au plating over Ni 8 pos.: with card detection switch <<Modification>> Card Positioning Embossed Part Number Detection Drawing No. Specifications boss Products S/W SF7W006S1AE1000 Yes No SJ035774 SJ035843 JACS 1661 SF7W006S1BE1000 No No SJ036050 SJ036051 JACS 1661 SF7W008S1AE900 No Yes SJ036170 SJ036170 JACS 1680 *Supplied by embossed tape and reel package. 2/4