DA PowerCool Series, DA-045-24-02
Thermoelectric Assembly
Innovative Technology
for a Connected World
PowerCool SerieS DireC-tt o-Air thermoeleCtriC ASSembly
The DA PowerCool Series is a Direct-to-Air thermoelectric assembly (TEA) that uses
impingement flow to transfer heat. It offers dependable, compact performance by
cooling objects via conduction. Heat is absorbed through a cold plate and dissipated thru
a high density heat exchanger equipped with an air ducted shroud and brand name fan.
The thermoelectric modules are custom designed to achieve a high coefficient of
performance (COP) to minimize power consumption. This product series is available in
a wide range of cooling capacities and voltages. Custom configurations and moisture
protection options are available, however, MOQ applies.
FeAtUreS APPliCA tionS
Compact design Analytical instrumentation
Medical diagnostics
Precise temperature control
Reliable solid-state operation Photonics laser systems
DC operation Industrial instrumentation
RoHS compliant Food and beverage cooling
Specifications
Cooling Power Qcmax (W) 48
Running Current (A) 2.5
Startup Current (A) 3.5
Nominal Voltage (V) 24
Max Voltage (V) 30
Power Input (W) 60
Operating Temperature (C) -10 to 46
Weight (kg) 1.2
MTBF (fans hrs) 50,000
Performance Tolerance 10%
PerFormAnCe CUrve
global solutions: local support
TM
Americas: +1.888.246.9050
Europe: +46.31.704.67.57
Asia: +86.755.2714.1166
CLV-customerservice@lairdtech.com
www.lairdtech.com/thermalDA PowerCool Series, DA-045-24-02
Thermoelectric Assembly
Innovative Technology
for a Connected World
iSometriC DrA wingS
moUnting hole loCA tion
noteS wiring SChemA tiC
For indoor use only.
Electrical connections
Thermally Conductive Grease enclosed.
+:+ TEM
Overheating Thermostat: 75C 5C -:- TEM
F+:+ Fan(s)
on hot side heat sink surface
F-:- Fan(s)
To use single supply. Lift the jumpers and rotate
90 to short-cut the pin pairs. Connect the unit
to + & -.
Warning: Single supply not applicable in
heating mode or with PWM-regulation.
THR-DS-DA-045-24-02 0810
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to
the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential
damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon
request. Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird
Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third
party intellectual property rights.