B1101UALTP

SIDACtor Protection Thyristors SLIC Protection RoHS e3 Pb Battrax Series - Single Port Negative - MS-013 Description The Battrax Protection Thyristor series offers programmable SIDACtor overvoltage protection components for SLIC applications. The Single Port Negative Battrax Protection Thyristor series provides a programmable device that is referenced to a negative voltage souce while internal diodes provide protection from positive surge events. Features and Benefits Low voltage overshoot device Low on-state voltage Integrated diodes for positive voltage Does not degrade surge protection capability after multiple Agency Approvals Pb-free E3 means 2nd surge events within level interconnect is Agency Agency File Number limit. Pb-free and the terminal Fails short circuit when E133083 finish material is tin(Sn) surged in excess of (IPC/JEDEC J-STD- ratings 609A.01) Pinout Designation Single-port protection RoHS compliant and Gate triggered tracking lead-free 1 6 Applicable Global Standards 2 5 TIA-968-A GR 1089 Intra-building 3 4 TIA-968-B IEC 61000-4-5 2nd edition ITU K.20/21 Enhanced Level YD/T 1082 Schematic Symbol ITU K.20/21 Basic Level YD/T 993 GR 1089 Inter-building YD/T 950 (T) 1 6 (No Connect) Additional Information (-V ) 2 (G) REF 5 (R) 3 4 (No Connect) Datasheet Resources Samples Electrical Characteristics V V V DRM S T I I I V Capacitance* H S T F l =5A 100V/s I =2.2 Amps Part Number Marking DRM T V min V max mA min mA max A max V max V max pF min pF max B1101UALxx B1101UA I-V I + I-1.2VI I-V I + I-10VI 100 100 2.2 4 5 30 200 REF REF B1161UALxx B1161UA I-V I + I-1.2VI I-V I + I-10VI 160 100 2.2 4 5 30 200 REF REF B1201UALxx B1201UA I-V I + I-1.2VI I-V I + I-10VI 200 100 2.2 4 5 30 200 REF REF B1101UCLxx B1101UC I-V I + I-1.2VI I-V I + I-10VI 100 100 2.2 4 5 30 200 REF REF B1161UCLxx B1161UC I-V I + I-1.2VI I-V I + I-10VI 160 100 2.2 4 5 30 200 REF REF B1201UCLxx B1201UC I-V I + I-1.2VI I-V I + I-10VI 200 100 2.2 4 5 30 200 REF REF Notes: - V Max Value for the negative Battrax is -200 V. REF - Absolute maximum ratings measured at T = 25C (unless otherwise noted). - XX = Part Number Suffix: TP (Tube Pack) or RP (Reel Pack). A - Components are not appropriate for positive ringing systems. * Off-state capacitance (C ) is measured across pins 1 & 5 and 3 & 5 O - All electrical characteristics shown are defined from Tip (pin 1) to Ground (pin 5), and Ring at 1 MHz with a 2V bias. (pin 3) to Ground (pin 5) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor Protection Thyristors SLIC Protection Surge Ratings I PP I TSM 1 1 1 1 1 1 1 1 1 di/dt 0.2/310 2/10 8/20 10/160 10/560 5/320 10/360 10/1000 5/310 50/60 Hz 2 2 2 2 2 2 2 2 2 0.5/700 2/10 1.2/50 10/160 10/560 9/720 10/360 10/1000 10/700 A min A min A min A min A min A min A min A min A min A min A/s max A 20 150 150 90 50 75 75 45 75 20 500 C 50 500 400 200 150 200 175 100 200 50 500 Notes: - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. 1 Current waveform in s PP - I ratings applicable over temperature range of -40C to +85C (I rating assumes V equals - 48 V) 2 Voltage waveform in s PP PP REF - The component must initially be in thermal equilibrium with -40C < T < +150C J Thermal Considerations Package Symbol Parameter Value Unit Modified MS-013 T Operating Junction Temperature Range -40 to +125 C J 6 5 4 T Storage Temperature Range -65 to +150 C S 1 R Thermal Resistance: Junction to Ambient 60 C/W 2 0JA 3 V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r V t = decay time to half value d Peak 100 Value V REF Waveform = t x t I r d F V V S DRM V T -V +V 50 Half Value I DRM I H I S I T 0 PIN 5 CONNECTED TO GROUND Pin 1-2: t t r d PIN 2 CONNECTED TO V I PIN 2 CONNECTED TO GROUNDREF 0 PP t Time (s) PIN 3 CONNECTED TO V REF -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 12 10 1.6 8 1.4 6 25C 25 C 1.2 4 1.0 2 0 0.8 -4 0.6 -6 0.4 -8 -40 -20 020406080100 120140 160 -40 -20 020406080100 120140 160 Junction Temperature (T ) C Case Temperature (T ) - C J C 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Series Percent of V Change % S I Peak Pulse Current %I I PP PP H Ratio of I (T = 25C) H C