Product Data Sheet EPBAP86 Power Distribution Block, Enclosed 760 Amps 600 Volts AC/DC Wire Range Line: (2) 500 kcmil - 4 AWG Load: (12) 4 - 14 AWG Electrical Ratings 760 Amps 600V per UL 1059 & CSA 22.2 No.158, class B & C requirements Short circuit current ratings (SCCR): See SCCR section below for specifications. CU7AL - 75C connector terminal rating with copper or aluminum wire Touch protection: IP-20 (IEC 60529) Factory & Field Wiring Agency Compliance UL Listed, Investigated to UL 1953, File QPQS.E309401 CSA - certifed to C22.2 No. 158, File No. LR19766 (wire classes B & C only) CE compliant to IEC 60947-7-1 (Pending) Material Information Insulator base: Thermoplastic Flammability rating of insulator base UL94V0 Insulator base temperature rating: -40C to 125C (UL RTI) Connector: plated aluminum Terminal set screws: plated steel Connector mounting screws: plated steel RoHS compliant A Regal Brand www.marathonsp.com 1Termination Specifications Wires / Wire Size 1 Line Side Torque Wire Class (UL) (CU Stranded) Terminal 500 kcmil - 2 AWG 42.3 Nm (375 lbfin) 1 B, C 350 kcmil - 2 AWG 42.3 Nm (375 lbfin) 1 B, C, G, H, I 4 AWG 42.3 Nm (375 lbfin) 1 B, C Aluminum stranded wire range: 3/0 - 6 AWG Wire strip length: 1-7/16 in. (36.5mm) IP-20 protection: With break-away tab - 3/0- 14 AWG Without break-away tab - 500 kcmil - 2/0 AWG Terminal screw drive: 3/8 inch hex Wires / Wire Size 1 Load Side Torque Wire Class (UL) (CU Stranded) Terminal 4 4 Nm (35 lbfin) 1 B, C 6 - 8 4 Nm (35 lbfin) 1 B, C, G, H, I 10 4 Nm (35 lbfin) 1 - 2 B, C, I 1 - 2 I 12 - 14 4 Nm (35 lbfin) 1 - 4 B, C Solid copper wire range: 10 - 14 Aluminum wire range: 4 - 6 AWG Wire strip length: top row: 1-3/16 in. (21mm) bottom row: 1-1/4 in. (32mm) Terminal screw drive: 1/8 inch hex drive IP-20 protection: 4 - 14 1 For information on copper stranded wire classes please reference: