35W Multiple-Stage Constant Current Mode LED Driver LCM -40U series File Name:LCM-40U-SPEC 2020-10-1335W Multiple-Stage Constant Current Mode LED Driver LCM -40U series SPECIFICATION MODEL LCM-40U Current level selectable via DIP switch, please refer toDIP SWITCH TABLE section CURRENT LEVEL 350mA 500mA 600mA 700mA(default) 900mA 1050mA RATED POWER 35W DC VOLTAGE RANGE 2 ~ 100V 2 ~ 70V 2 ~ 59V 2 ~ 50V 2 ~ 39V 2 ~ 34V OUTPUT OPEN CIRCUIT VOLTAGE (max.) 110V 65V CURRENT RIPPLE Note.6 5.0% max. rated current CURRENT TOLERANCE 5% AUXILIARY DC OUTPUT Nominal 12V(deviation 11.4~12.6V) 50mA SETUP TIME Note.3 1000ms / 115VAC 90 ~ 132VAC 127 ~ 186VDC VOLTAGE RANGE Note.2 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.98/115VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) INPUT THD< 20%( load50%) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) EFFICIENCY (Typ.) Note.4 87.5% AC CURRENT (Typ.) 0.43A/115VAC INRUSH CURRENT (Typ.) COLD START 15A(twidth=270s measured at 50% Ipeak) at 115VAC Per NEMA 410 MAX. No. of PSUs on 16A 22 units (circuit breaker of type B) / 38 units (circuit breaker of type C) at 115VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 120VAC SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 110 ~ 130V OVER VOLTAGE PROTECTION Shutdown o/p voltage, re-power on to recover OVER TEMPERATURE Shutdown o/p voltage,re-power on to recover Please refer toDIMMING OPERATIO section DIMMING Please refer toSYNCHRONIZATION OPERATION section SYNCHRONIZATION FUNCTION TEMP. COMPENSATION By external NTC, please refer to TEMPERATURE COMPENSATION OPERATIONsection WORKING TEMP. Tcase=-30 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) Tcase=+90 MAX. CASE TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL8750 approved DALI STANDARDS Comply with IEC62386-101, 102, 207 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Compliance to FCC part 15 Subpart B MTBF 193.6K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 123.5*81.5*23mm (L*W*H) 0.28Kg 54pcs/16Kg/1.12CUFT PACKING NOTE ,