Development Kit MLX91206 Development Kit MLX91206 REV002 2011 1 Description The development kit provides the needed information and components to develop a current sensor based on the MLX91206. The main goal is to show the functionalities and the features of the part in a simple and effective way. The kit includes: 1 MLX91206CAL mounted on PCB EC01 1 MLX91206CAL mounted on PCB EC02 1 separate MLX91206CAL 3 separate MLX91206CAHs 1 separate PCB EC01 1 separate PCB EC02 2 shields U 12 The kit does not include a bus bar. Datasheet and Application Note can be found on www.melexis.com REV002 Page 1 of 10 2011 Development Kit MLX91206 2 Specification of EC-01 The included PCB utilizes PCB traces for medium current range measurements. Layer: Two layer with copper thickness 105m The top layer is a conductor The bottom layer is an expanded ground layer TOP- layer Bottom- layer (1) Current: We recommend : MAX 30A RMS for PCB application MAX 1kA for Bus bar application Dimension l/b/h : 36.8mm x 30.5mm x 1.6mm (1): The maximum current is limited by the PCB. For higher currents (> 30A), one can use an external conductor (i.e. a bus bar). 3 Specification of EC-02 The included PCB is based on PCB loops for small current range measurements. Layer: Four layers, Top- and Bottom- layer with copper thickness 105m, Second- and the Third- layer with copper thickness 35m Three loops are on the PCB Top- layer Second- layer Third - layer Bottom- layer (1) Current: We recommend : MAX 30A RMS for PCB application MAX 1kA for Bus bar application Dimension l/b/h : 36.8mm x 30.5mm x 2mm (1): The maximum current is limited by the PCB. For higher currents (> 30A), one can use an external conductor (i.e. a bus bar). REV002 Page 2 of 10 2011