Large Current & High Insertion Loss 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) for General Purpose NFM18PS105D0J3 (0603, 1uF, DC6.3V) : packaging code Reference Sheet 1.Scope This product specification is applied to Large Current & High Insertion Loss 3 Terminals Low ESL Chip Multilayer Ceramic Capacitorss (EMIFIL) used for General Electronic equipment. 2.MURATA Part NO. System (Ex.) NFM 18 PS 105 D 0J 3 D (1)L/W (3)Nominal (2)Features (4)Characteristics (5)DC Rated Voltage (6)Electrode (7)Packaging Code Dimensions Capacitance 3. Type & Dimensions a)Equivalent Circuit (Unit:mm) (1)-1 L (1)-2 W T g e1 e2 i j 1.60.1 0.80.1 0.60.1 0.2 min. 0.15+0.2/-0.1 0.15+0.2/-0.1 0.40.1 0.8+0.2/-0.1 4.Rated value (5) Rated (3) Nominal Capacitance DC Insulation Specifications and Test Methods DC Rated Current (Operating /Storage Temp. Range) Capacitance Tolerance Resistance Resistance Voltage (mA) 1 uF 20 % DC 6.3 V 2A(DC) 30mmax. 500Mmin. -55 to 125 C / -55 to 125 C 5.Package mark (7) Packaging Packaging Unit f180mm Reel D 4000 pcs./Reel PAPER W8P4 Product specifications in this catalog are as of Aug.3,2017,and are subject to change or obsolescence without notice. Please consult the approval sheet before ordering. Please read rating and Cautions first. NFM18PS105D0J3-01 1SPECIFICATIONS AND TEST METHODS Electrical Performance Item No Specification Test Method 1 Capacitance Shown in Rated value. Frequency : 1.00.1kHz Voltage : 10.2V(rms) (Cap.) Voltage : Rated Voltage 2 Insulation Time : 2 minutes max. Resistance(I.R.) 3 DC Resistance Measured with 100mA max. 4 Withstanding Voltage Products shall not be damaged. Test Voltage : Rated Voltage x 300% Time : 1 to 5 s Charge Current : 50 mA max. Operating Temperature 5 Shown in Rated value. Includes self-heating Storage Temperature 6 Standard Testing Condition < Unless otherwise specified > < In case of doubt > Temperature : Ordinary Temp. / 15 C to 35 C Temperature: 20 C 2 C Humidity: Ordinary Humidity / 25 %(RH) to 85 %(RH) H u mid it y : 60 %(RH) to 70 %(RH) Atmospheric pressure: 86 kPa to 106 kPa JEMCPS-02212C 2