MOD5270 Ethernet Core Module 100 Version with RJ-45 200 Version with 10-pin header DATASHEET Key Points Use as a high-performance single board Customize with a development kit and begin computer or add Ethernet connectivity writing application code immediately to a new or existing design Industrial temperature range (-40C to 85C) Device Connectivity 10/100Mbps Ethernet 47 digital I/Os 2 3 UARTs, I C, and SPI 16-bit address bus and 32-bit data bus with 3 chip selects SD/MMC flash card ready Performance and memory 32-bit 147.5 MHz Processor 8MB SDRAM and 512KB Flash Companion development kit The following is available with the development kit: Customize any aspect of operation including web pages, data filtering, or custom network applications Development software: NB Eclipse IDE, Graphical debugger, deployment tools, and examples Communication software: TCP/IP stack, HTTP web server, FTP, E-mail, and flash file system System software: uC/OS RTOS, ANSI C/C++ compiler and linker The following optional software modules are not included with kit and are sold separately: Embedded SSL & SSH Security Suite (Module License Version) SNMP Updated: December 5, 2018 Page 1 of 8 2018 NetBurner Inc. All Rights Reserved.MOD5270 Specifications Processor and Memory 32-bit Freescale ColdFire 5270 running at 147.5MHz with 8MB SDRAM, 512KB Flash, and 64Kb SRAM. Network Interface 10/100 BaseT with RJ-45 connector (100 Version) 10-pin header (200 Version) Data I/O Interface (J1 and J2) 2 Up to 3 UARTs I C interface Up to 47 digital I/O SPI interface Up to 3 external timer in and up to 4 timer outputs SD/MMC flash card ready Up to 4 external IRQs 16-bit address bus and 32-bit data bus with 3 chip selects Flash Card Support FAT32 support for SD Cards up to 8GB (requires exclusive use of SPI signals). Card types include SD/MMC (up to 2GB) and SDHC. Serial Configurations The UARTs can be configured in the following way: 3 TTL ports Add external level shifter for RS-232 Add external level shifter for RS-422/485 (up to three ports) Note: UART 0/1/2 also provides RTS/CTS hardware handshaking signals. LEDs Link and Speed (100 Version only, on RJ-45) Physical Characteristics Dimensions (inches): 2.60 x 2.00 Weight: 1 oz. Mounting Holes: 2 x 0.125 dia. Power DC Input Voltage: 3.3V 380mA typical Environmental Operating Temperature -40 to 85 C RoHS Compliance The Restriction of Hazardous Substances guidelines ensure that electronics are manufactured with fewer envi- ronment harming materials. Updated: December 5, 2018 Page 2 of 8 2018 NetBurner Inc. All Rights Reserved.