74LVC16373A 74LVCH16373A 16-bit D-type transparent latch with 5 V tolerant inputs/outputs 3-state Rev. 9 15 February 2019 Product data sheet 1. General description The 74LVC16373A and 74LVCH16373A are 16-bit D-type transparent latches featuring separate D-type inputs with bus hold (74LVCH16373A only) for each latch and 3-state outputs for bus-oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications. The device consists of two sections of eight D-type transparent latches with 3-state true outputs. When LE is HIGH, data at the Dn inputs enter the latches. In this condition, the latches are transparent, that is, the latch outputs change each time its corresponding D-input changes. The latches store the information that was present at the D-inputs one set-up time (t ) preceding the su HIGH-to-LOW transition of LE. When OE is LOW, the contents of the eight latches are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latches. Bus hold on the data inputs eliminates the need for external pull-up resistors to hold unused inputs. 2. Features and benefits 5 V tolerant inputs/outputs for interfacing with 5 V logic Wide supply voltage range from 1.2 V to 3.6 V CMOS low power consumption Multibyte flow-through standard pinout architecture Multiple low inductance supply pins for minimum noise and ground bounce Direct interface with TTL levels All data inputs have bus hold (74LVCH16373A only) High-impedance when V = 0 V CC Complies with JEDEC standard: JESD8-7A (1.65 V to 1.95 V) JESD8-5A (2.3 V to 2.7 V) JESD8-C/JESD36 (2.7 V to 3.6 V) ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-B exceeds 200 V CDM ANSI/ESDA/Jedec JS-002 exceeds 1000 V Specified from -40 C to +85 C and -40 C to +125 CNexperia 74LVC16373A 74LVCH16373A 16-bit D-type transparent latch with 5 V tolerant inputs/outputs 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC16373ADGG -40 C to +125 C TSSOP48 plastic thin shrink small outline package SOT362-1 48 leads body width 6.1 mm 74LVCH16373ADGG 74LVC16373ADL -40 C to +125 C SSOP48 plastic shrink small outline package SOT370-1 48 leads body width 7.5 mm 74LVC16373ADGV -40 C to +125 C TSSOP48 1 plastic thin shrink small outline package SOT480-1 48 leads body width 4.4 mm 74LVCH16373ADGV lead pitch 0.4 mm 1 Also known as TVSOP48. 4. Functional diagram 1 1OE 1EN 1 24 48 1LE C3 24 2OE 2EN 1OE 2OE 25 47 1D0 1Q0 2 C4 2LE 46 3 1D1 1Q1 47 2 1D0 3D 1 1Q0 44 1D2 1Q2 5 3 46 1D1 1Q1 43 1D3 1Q3 6 5 44 1D2 1Q2 41 1D4 1Q4 8 43 6 1D3 1Q3 40 1D5 1Q5 9 41 8 1D4 1Q4 38 1D6 1Q6 11 40 9 1D5 1Q5 37 1D7 1Q7 12 38 11 1D6 1Q6 36 2D0 2Q0 13 12 37 1D7 1Q7 35 2D1 2Q1 14 36 13 2D0 4D 2 2Q0 33 2D2 2Q2 16 35 14 2D1 2Q1 32 2D3 2Q3 17 33 16 2D2 2Q2 30 2D4 2Q4 19 32 17 2D3 2Q3 29 2D5 2Q5 20 30 19 2D4 2Q4 27 2D6 2Q6 22 29 20 2D5 2Q5 26 2D7 2Q7 23 27 22 2D6 2Q6 1LE 2LE 26 23 2D7 2Q7 mgu768 48 25 mgu770 Fig. 1. Logic symbol Fig. 2. IEC logic symbol 74LVC LVCH16373A All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 9 15 February 2019 2 / 17