IP3319CX6,135 Nexperia

IP3319CX6 Single-channel common-mode filter with integrated ESD protection network Rev. 2 29 May 2013 Product data sheet 1. Product profile 1.1 General description 2-lines (one differential channel) common-mode filter with integrated ESD protection up to 15 kV contact discharge, exceeding IEC 61000-4-2, level 4. The device can eliminate efficiently common-mode noise from USB 2.0 and other high-speed interfaces with differential lines. IP3319CX6 attenuates significantly common-mode noise above 800 MHz while differential-mode signal extends out to more than 1 GHz before reaching the 3dB point. IP3319CX6 is designed to protect sensitive I/Os, such as USB 2.0, Ethernet, Digital Video Interface (DVI) and Low-Voltage Differential Signaling (LVDS) interfaces from destruction by ElectroStatic Discharge (ESD). IP3319CX6 is a combination of an integrated copper-coils common-mode filter and a monolithic silicon technology-based ESD protection. It integrates two ultra-low capacitance rail-to-rail diodes plus a separated protection diode in a 0.4 mm pitch Wafer-Level Chip-Size Package (WLCSP). Due to the rail-to-rail concept, the protection is working independently from availability of a supply voltage 1.2 Features and benefits 2-lines (one differential mode) ESD protection up to 15 kV on external common-mode filter contact pins ESD protection for the USB ID line Ultra low ESD diode capacitance Extremely low clamping voltage WLCSP6 with 0.4 mm pitch 1.3 Applications USB 2.0 High-speed lines DVI LVDS interfaces 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit channel series resistance single line input to output - 6 - R s(ch) 1 diode capacitance V = 0 V f = 1 MHz -1.5 -pF C d I pins A2, B2 to GND 1 This parameter is guaranteed by design.IP3319CX6 Nexperia 1-channel common-mode filter with integrated ESD protection network 2. Pinning information Fig 1. Pin configuration Table 2. Pinning 1 1 Pin Symbol Description A1 D+ OUT USB data D+ (host side) A2 D+ IN USB data D+ (connector side) B1 D OUT USB data D (host side) B2 D IN USB data D (connector side) C1 GND ground C2 ID USB identification 1 D+ and D are interchangeable. 3. Ordering information Table 3. Ordering information Type number Package Name Description Version 1 IP3319CX6 WLCSP6 wafer level chip-size package 6 bumps (2 3) IP3319CX6 1 Size: 1.34 mm 0.95 mm 0.57 mm IP3319CX6 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 29 May 2013 2 of 15