74HC126N

INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT126 Quad buffer/line driver 3-state December 1990 Product specication File under Integrated Circuits, IC06Philips Semiconductors Product specication Quad buffer/line driver 3-state 74HC/HCT126 FEATURES Output capability: bus driver I category: MSI CC GENERAL DESCRIPTION The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The HC/HCT126 are four non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a HIGH impedance OFF-state. The 126 is identical to the 125 but has active HIGH enable inputs. QUICK REFERENCE DATA GND = 0 V T = 25 C t = t = 6 ns amb r f TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC HCT t / t propagation delay nA to nY C = 15 pF V = 5 V 9 11 ns PHL PLH L CC C input capacitance 3.5 3.5 pF I C power dissipation capacitance per buffer notes 1 and 2 23 24 pF PD Notes 1. C is used to determine the dynamic power dissipation (P in W): PD D 2 2 P = C V f + (C V f ) where: D PD CC i L CC o f = input frequency in MHz i f = output frequency in MHz o C = output load capacitance in pF L V = supply voltage in V CC 2 (C V f ) = sum of outputs L CC o 2. For HC the condition is V = GND to V I CC For HCT the condition is V = GND to V - 1.5 V I CC ORDERING INFORMATION See 74HC/HCT/HCU/HCMOS Logic Package Information. December 1990 2