Safety interlock Switches A22E A22e emergency Stop Switch (22-dia. or 25-dia.) Install in 22-dia. or 25-dia. panel cutout Direct opening mechanism to open the circuit when the contact welds . Safety lock mechanism prevents operating errors. Easy mounting and removal of Switch Blocks using a lever. Mount three Switch Units in series to improve wiring efficiency (with non-lighted Switch Units, three Units can be mounted for multiple contacts). Finger protection mechanism on Switch Unit provided as a standard feature. Install using either round, or forked crimp terminals. Oil-resistant to IP65 (non-lighted models)/IP65 (lighted models) A lock plate is provided as a standard feature to ensure that the control box and switch are not easily separated. g Specifications certified Standard ratings ratings UL, cUL (File No.E41515) contacts (Standard load) 6A at 220 VAC, 10 A at 110 VAC rated current (A) TV (EN60947-5-1) (Low Voltage Directive) rated rated carry 3 A at 220 VAC Ac15 Ac12 Dc13 Dc12 voltage current CCC (GB14048.5) (inductive (resistive (inductive (resistive (V) (A) load) load) load) load) 3 A at 240 VAC, 1.5 A at 24 VDC 24 VAC 10 10 certified Standards 110 VAC 5 10 220 VAC 3 6 --- --- certification Standard file no. body 380 VAC 2 3 10 440 VAC 1 2 UL *1 UL 508, CSA C22.2 No.14 E41515 24 VDC 1.5 10 EN60947-5-1, Consult your 110 VDC 0.5 2 EN60947-5-5 TV SD representative for --- --- (certified direct opening details. 220 VDC 0.2 0.6 mechanism) 380 VDC 0.1 0.2 CQC (CCC) GB14048.5 2003010303070635 Note: KOSHA *2 EN60947-5-1 2004-220, 2007-27 1. Rated current values are determined according to the testing conditions. Note: Only models with NC contacts have a direct opening mechanism. The above ratings were obtained by conducting tests under the following *1. Certification for CSA C22.2 No. 14 is authorized by the UL mark. conditions. *2. Some models have been certified. Certification has been obtained for (1) Ambient temperature: 202C the Switch Unit and the Lamp Socket. (2) Ambient humidity: 655% (3) Operating frequency: 20 operations/minute 2. Minimum applicable load: 10 mA at 5 VDC leD indicators without Voltage reduction Unit rated voltage rated current Operating voltage 6 VDC 60 mA 6 VDC5% 6 VAC 60 mA 6 VAC5% 12 VAC/VDC 30 mA 12 VAC/VDC5% 24 VAC/VDC 15 mA 24 VAC/VDC5% Omr On Scientific technOlOgieS, inc. For the Latest Information g11 USA Tel. 1/888/510-4357 canada Tel. 1/866/986-6766 On the Internet: www.sti.com or www.omron.caA22e Safety interlock Switches Dimensions (mm) non-lighted models A22E-MP A22E-LP Medium Push-pull (40-dia.) Large Push-pull (60-dia.) 60 dia. 34 34 40 dia. 1.8 1.8 0.5 0.5 5.9 5.9 32 54.7 32 54.7 A22E-S A22E-M 2 Small Push-lock, Turn-reset (30-dia.) Medium Push-lock, Turn-reset (40-dia.) 1.5 2 30 dia. 34 34 40 dia. 1.8 0.5 6.5 1.8 5.9 18.5 0.5 5.9 32 54.7 32 41.2 g 54.7 A22E-L Large Push-lock, Turn-reset (60-dia.) 60 dia. 34 1.8 0.5 5.9 54.7 32 A22E-SK A22E-MK Small Push-lock, Key-reset (30-dia.) Medium Push-lock, Key-reset (40-dia.) 30 dia. 40 dia. 34 22 34 22 1.8 1.8 0.5 0.5 5.9 5.9 25 32 54.7 25 32 54.7 Switch dimensions when mounted to a DPSt -nO (or DPSt -nc) lighted models one-piece Switch Block. A22EL-M 2 Medium Push-lock, Turn-reset (40-dia.) 1.5 2 24 44 34 40 dia. 57.8 72.7 6.5 1.8 18.5 0.5 5.9 32 41.2 Note: The operation unit is an example for the A22E-M. 54.7 Omr On Scientific technOlOgieS, inc. For the Latest Information g12 USA Tel. 1/888/510-4357 canada Tel. 1/866/986-6766 On the Internet: www.sti.com or www.omron.ca