EMI6183FCTBG ON Semiconductor

EMI6183 Common Mode Filter with ESD Protection Product Description The EMI6183 is an Integrated Common Mode Filter in a 3x2, 6bump, 0.4 mm pitch, CSP form factor for the elimination of EMI6183 ORDERING INFORMATION Device Package Part Marking Shipping EMI6183FCTBG 3 x 2, 6bump CSP 61 5000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. PIN DESCRIPTION Pin Name Type Parameter A1 I/O CMF Channel 1+ to ASIC (Internal Pin) A2 I/O CMF Channel 1+ to Connector (External Pin) B1 I/O CMF Channel 1 to ASIC (Internal Pin) B2 I/O CMF Channel 1 to Connector (External Pin) C1 GND Ground C2 ID ID Pin for ESD Protection (External Pin) MAXIMUM RATINGS (T = 25C unless otherwise stated) A Parameter Symbol Rating Unit ESD Discharge IEC6100042 Contact Discharge V 8.0 kV PP Operating Temperature Range T 40 to +85 C OP Storage Temperature Range T 55 to +150 C STG Maximum Lead Temperature for Soldering Purposes T 260 C L (1/8 from Case for 10 seconds) DC Current per Line I 100 mA LINE Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (Note 1) Parameter Symbol Test Conditions Min Typ Max Unit Maximum Reverse Working Voltage V 5.5 V RWM Breakdown Voltage V I = 1 mA 6.0 V B R Leakage Current I V = 3 V 10 300 nA LEAK RWM ESD Protection Peak Discharge Voltage at A2, B2 & V (Notes 2 and 3) ESD C2 8.0 kV a) Contact discharge per IEC6100042 Standard 15 kV b) Air discharge per IEC6100042 Standard ESD Protection Peak Discharge Voltage at A1 & B1 V (Notes 2 and 3) ESD a) Contact discharge per IEC6100042 Standard 2.0 kV b) Air discharge per IEC6100042 Standard 2.0 kV TLP Clamping Voltage (See Figure 6) V Forward I = 8 A 11.58 V CL PP Forward I = 16 A 15 V PP Reverse I = 8 A 4.5 V PP Reverse I = 16 A 8.8 V PP Resistance A1 to A2 B1 to B2 R 8.0 CH Capacitance B2 to C1 C At 1 MHz, V = 0 V (Note 2) 2.8 pF L1 IN Capacitance A2 to C1 C At 1 MHz, V = 0 V (Note 2) 3.1 pF L2 IN Capacitance C2 to C1 C At 1 MHz, V = 0 V (Note 2) 1.5 pF ID IN Differential Mode CutOff Frequency f (Note 4) 2.0 GHz 3dB Common Mode Stop Band Attenuation F 800 MHz 21 dB atten 1. All parameters specified at T = 25C unless otherwise specified. A 2. These parameters guaranteed by design and characterization. 3. Standard IEC6100042 with C = 150 pF, R = 300 . Discharge Discharge 4. Above this frequency, appreciable Common Mode Attenuation occurs at 50 Source and 50 load termination.