NCV7719DQAR2G ON Semiconductor

NCV7719 Octal Half-Bridge Driver The NCV7719 Octal is an eight channel half-bridge driver with protection features designed specifically for automotive and industrial motion control applications. The product has independent controls and diagnostics, and the drivers can be operated in forward, reverse, brake, and high impedance states. The device is controlled via a 16 bit SPI www.onsemi.com interface and is daisy chain compatible. Features Low Quiescent Current Sleep Mode HighSide and LowSide Drivers Connected in HalfBridge Configurations SSOP24 NB EP Integrated Freewheeling Protection (LS and HS) CASE 940AK 0.55 A Peak Current R = 1.0 (typ) DS(on) 5 MHz SPI Communication MARKING DIAGRAM 16 Bit Frame Error Detection Daisy Chain Compatible with Multiple of 8 bit Devices NCV7719 NCV7719A Compliance with 3.3 V and 5 V Systems AWLYWWG AWLYWWG Undervoltage and Overvoltage Lockout Discriminated Fault Reporting Over Current Protection NCV7719 or = Specific Device Code NCV7719A Overtemperature Protection A = Assembly Location Underload Detection WL = Wafer Lot Exposed Pad Package Y = Year WW = Work Week NCV Prefix for Automotive and Other Applications Requiring G = PbFree Package Unique Site and Control Change Requirements AECQ100 Qualified and PPAP Capable This is a PbFree Device ORDERING INFORMATION See detailed ordering and shipping information on page 24 of Typical Applications this data sheet. Automotive Industrial DC Motor Management for HVAC Application Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: July, 2018 Rev. 7 NCV7719/DNCV7719 NCV7719 Highside Driver OUT1 VS1 Lowside Driver MRA4003T3 13.2 V VS2 HS OUT2 LS VCC Voltage Power On HS Reset OUT3 Regulator LS EN HS Control OUT4 Watchdog Logic LS HS OUT5 Protection: LS Under Load Over Temperature Undervoltage HS Overvoltage OUT6 Over Current LS SO HS OUT7 16 Bit SI Serial SCLK LS uC Data CSB Interface Highside Driver OUT8 Lowside Driver GND Figure 1. Typical Application www.onsemi.com 2