Designed for Rugged Excellence V1.5 Aug, 2019 IPS-1080-24V Industrial 8-port unmanaged PoE Ethernet switch with 8x10/100Base-T(X) P.S.E., 24VDC power input Features Provide 8x10/100Base-T(X) PoE (P.S.E.) ports Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port Advanced PoE power boost technology to support dual 24VDC power inputs Support auto-negotiation and auto-MDI/MDI-X Support store and forward transmission Support flow control Warning system by relay output Rigid IP-30 housing design DIN-Rail and wall mounting enabled Introduction IPS-1080-24V is unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for o o instance) that will provide power in a PoE setup. The wide operating temperature range from -40 C to 75 C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application. Practical Operation IPS-1080-24V can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. Connections of Ethernet devices * All specifications are subject to change without notice. Designed for Rugged Excellence V1.5 Aug, 2019 Diagram of PoE Output Dimension * All specifications are subject to change without notice.