Detector Switches/ESE18 ESE18 Detector Switches Type: ESE18 Features Recommended Ap pli ca tions Thin body: 1.2 mm Detection of media in portable electronic equipment Circuit type: Normally-open and normally-closed (Mobile phones/CD-ROM/DVD players, Digital still cameras) types are available. Travel: Standard stroke type: 1.5 mm Long stroke type: 2.15 mm Surface mounted type: Packed with embossed tape. Supports re ow soldering. Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 Design No Product Code 6th Type L Left-side operation type R Right-side operation type Rating 50 A 3 V DC to 10 mA 5 V DC (Resistive load) Contact Resistance 500 m max. (Initial) Insulation Resistance 100 M min. (at 100 V DC for 1 minute) Dielectric Withstanding Voltage 100 V AC (50 Hz or 60 Hz) for 1 minute Operating Force 300 mN max. Mounting Height 1.2 mm Poles and Throws 1-pole 1-throw Standard stroke type Long stroke type Full Travel (Pushing distance) With boss : 1.4 mm (1.5 mm) With boss : 1.4 mm (2.15 mm) Without boss : 2.1 mm (1.5 mm) Without boss : 2.1 mm (2.15 mm) Operating Life 50,000 cycles min. Temperature Range 10 C to +60 C (Standard), 40 C to +85 C (Automotive) Heat Resistance +70 C for 96 hours Low Temperature Resistance 25 C for 96 hours Humidity Resistance +40 C 90 % to 95 % RH for 96 hours Minimum Quantity/Packing Unit 5,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 30,000 pcs. Panasonic Corporation 2017 ANCTB49E 201706-Fd 1 Detector Switches/ESE18 Dimensions in mm (not to scale) No. 1 Standard stroke type ESE18L J-bent terminals Normal open 1-pole 1-throw 0.25 with Boss ON angular terminal OFF angular terminal ESE18L11B Operation point Full stroke position Normal open 5.4 2.6 max. ON start position without Boss 3.2 OFF start position (1.2) ESE18L11A 1.0 0.54 Normal closed with Boss ESE18L61B Pivot center Normal closed ON start position Case center without Boss OFF start position ESE18L61A Dummy terminal 1.8 3.6 0.25 Pivot center 0.5 0.4 2.7 4.0 0.5 PWB mounting hole for reference 1.20.2 (Pitch tolerance: 0.05) No. 2 Standard stroke type ESE18L Straight termi nals Normal open 1-pole 1-throw ON angular terminal OFF angular terminal with Boss ESE18L11D 2.6 max. ON start position Normal open OFF start position (1.2) 5.4 without Boss 1.0 3.2 0.54 ESE18L11C Pivot center Normal closed with Boss 0.5 ESE18L61D Normal closed without Boss Dummy terminal ESE18L61C 0.25 0.5 1.8 0.4 2.7 3.6 1.20.2 4.0 PWB mounting hole for reference (Pitch tolerance: 0.05) 0.25 No. 3 Long stroke type ESE18L J-bent terminals Normal open ON angular terminal 1-pole 1-throw OFF angular terminal with Boss ESE18L12B (3.2) ON start position (1.2) OFF start position Normal open 1.0 5.4 0.54 without Boss 3.2 ESE18L12A Pivot center Normal closed with Boss ESE18L62B Normal closed without Boss ESE18L62A 0.25 0.5 1.8 0.4 2.7 3.6 0.5 4.0 1.20.2 PWB mounting hole for reference (Pitch tolerance: 0.05) Panasonic Corporation Electromechanical Control Business Division Panasonic Corporation 2017 ANCTB49E 201706-Fd 2 industrial.panasonic.com/ac/e/ (14.7) (14.7) (14.7) 0.65 0.65 0.65 n n o i o t i c t c e (52.4) r e i r d i (52.4) d n (52.4) n o R0.3 i o t i c t R0.3 c A A R0.3 0.25 3.4 0.25 3.4 3.4 2.00.1 2.00.1 0.60.05 2.00.1 0.60.05 0.60.05 2.9 ON start position 3.55 OFF start position 2.6 ON start position 2.9 OFF start position 3.1 2.6 (2.0) Operation point (2.0) Operation point (2) Full stroke position 1.4 1.4 Full stroke position 1.4 1.0 1.0 1.0 0.75 0.75 0.7 0.75 (Pivot center) 0.7 (Pivot center) 0.7 0.7 0.7 0.7 0.5 0.5 0.5 0.5 0.5 0.5 Case center 1.2 1.2 Case center 1.2 0.25 0.25 1.15 0.25 1.15 3.0 1.15 3.0 3.8 3.0 4.1 3.8