2013 Vol.1 SD Memory Card Roadmap Panasonic SD Memory Offers the High Reliability Industrial/Automotive SD Memory (Capacity) 2 TB Demanded for Industrial/automotive Use 2TB 1TB 2 TB High Reliability and Panasonic Controller Technology 1 TB SDXC Memory Card 512GB Extended Power Failure Program/Erase Temperature Robustness Endurance Data Programming and Erase Endurance Secure Storage 512 GB 256GB Wear Levelling Bit Error Auto Refresh 256 GB 128GB I UHS- Maximising SD Memory Life Withstanding Repeated Reading Operations Specifications for industrial/automotive applications demanding high reliability. 64 GB SDHC Memory Card 128 GB 32 GB Static wear levelling controls written data, including fixed data. Automatically refreshes the bit errors that accumulate over time, Various use cases eliminate intensive data writing and maximise before they exceed the threshold. (Accumulated bit errors are 64 GB 32 GB Various customization to meet customer requirements. the lifetime of the SD card. detected from read data.) 16 GB Proceeding toward UHS-II * This function does not guarantee permanent data retention. 8 GB B-to-B specialised support provided. SD Memory Card for even higher speed Damage High Panasonic Panasonic Controller Controller occurs due to Panasonic Panasonic intensive x: Correctable error bits Controller Controller 4 GB programing Program and erasing and Erase 2 GB Refresh Maximising Cycles the SD card s lifetime with Low uniform 2 GB Detects and corrects bit errors, programing and automatically rewrites data. and erasing Standard speed Max. 22 MB/s Max. 95 MB/s Even higher speed Without wear levelling With wear levelling function ~2005 2006 2007 2008 2009 2010 2011 2012~ (year) Power Failure Robustness Intelligent Data Writing Recovery I What is UHS- Dispersion of Writing Stress to NAND Flash Memory Protects saved data and device Intelligent data writing disperses the writing stress to NAND flash Unique Panasonic algorithms minimise data damage in the UHS-I (Ultra High Speed I) is a speed specification for SD Memory Cards that was established in 2010. Its features memory, to reduce program disturbances. event of a power interruption. Even in the event that an error is include a maximum bus interface speed of up to 104 MB/s. It utilizes conventional SD design assests and offers generated, the controller recovers the data, restoring it to the enhanced speeds. Three different modes (DDR50, SDR50 and SDR104) have been standardized for the UHS-I condition prior to the error, and preventing errors from reaching based on the application and objective. the entire SD memory area. (Ultra High Speed) I MB/s UHS- 104 * Power Fail Robustness Mode rmware also available for more robust MLC system Speed Specification and Performance 2010 UHS Speed Class 1 of SD Memory Cards (Years indicate the year that the standard was established.) Durable Performance (High Speed) 2006 HS 25MB/s (Class 10 was established in 2009) Panasonic SD memory Temperature Resistance Electrostatic Resistance Impact Resistance features high endurance (Default Speed) 2000 DS 12.5MB/s (Class 2,4,6 were established in 2006) against static electricity, Operation is assured even under High endurance against magnetism, and X-rays. ICE 61000-4-2 compliance: harsh temperature conditions. bending and twisting. Clears Electrostatic Discharge Bus Interface Standard Conventional UHS-I Immunity Tests of 150-pF A usable temperature range of 20 N (Newton) min. Bending Mode HS DDR50 SDR50 SDR104 energy storage capacitance, -40 C to 85 C maintains stable load resistance (SD standard: 10 N) 15-kV aerial discharge, and performance everywhere, from Signal Amplitude 3.3 V Amplitude 1.8 V Amplitude 330- discharge resistance. Twisting torque 0.3 Nm (Newton meter) min. extremely cold to intensely hot Clock Frequency 50 MHz 50 MHz 100 MHz 208 MHz resistance (SD standard: 0.15 Nm) climates. Data Frequency 50 MHz 100 MHz 100 MHz 208 MHz Logic Performance 25 MB/s 50 MB/s 50 MB/s 104 MB/s Magnetic Resistance X-Ray Resistance Water Resistance Built-in Fuse (Bus Speed) Minimal damage Data is protected JIS IPX7 compliance: Operable The internal card fuse protects against after submerging the product in from magnetic forces. from X-rays. excess current and abnormal heating. Product Precautions water (tap water, 1-m depth) for Even if excess current or abnormal heating Operable after being set onto a ISO 7816-1 compliance: Operable 30 minutes. were to occur due to internal card damage 1,000-gauss DC magnetic eld for after 0.1 Gy (gray) of X-ray SDHC memory cards can be used with SDHC and SDXC host products. SDHC memory cards cannot be used with products that are solely compliant caused by the device being used or the * micro SD Excluding SD adaptor use. approx. 1 minute. irradiation. with SD memory cards. environment, the built-in fuse will operate to * Card only. SDXC memory cards can be used only with SDXC host products. SDXC memory cards cannot be used with SD and SDHC host products. Check if prevent the SD Memory Card from overheating or igniting. the device has an SDXC logo, or refer to the device s instruction manual or other manufacturer s information * Please note that using an SDXC Memory Card in a non-compatible computer or device may cause card compatibility problems or loss of data. The SD Memory Card is intended for ordinary use in for home or professional devices and embedded systems. Consult with Panasonic in advance Applications by Model about uses for applications that require a high degree of reliability (uses that may have a serious impact on human lives, such as in nuclear power or social infrastructure applications.) Data Protection Card Endurance Wear Intelligent Temperature Electrostatic Impact Magnetic X-Ray Water Refresh Recovery Fuse Levelling Data Writing Resistance Resistance Resistance Resistance Resistance Resistance For more information FX Series Industrial/Automotive Use SD Memory Line-up States of FG stored States of FG stored SLC MLC SLC and MLC with electron: 2 with electron: 4 Products converted to SLC are also available on demand. MLC eSD (Flexible Connection Type) Form factor of module can be customized. The NAND flash memory that is used in SD Bit compatibility example Vth Vth Memory Cards has Single Level Cells (SLC), 00 which each store 1 bit of data, and Multi Level 0 01 Cells (MLC), which each store 2 bits. The FX 4 state per cell 2 state per cell 10 2 bits Series use SLCs to provide superior data 1 bit 0V 0V retention and reliability. 1 11 distribution distribution RP-SD04GP RP-SD08GP RP-SD16GP SLC MLC (4 GB) (8 GB) (16 GB) (Rear surface) Series Series FX KC * 128MB/512MB SLC line-up also available Performance Specifications Model RP-SD04GP RP-SD08GP RP-SD16GP 1 Capacity* 4 GB 8 GB 16 GB Flash Memory Type Multi-Level Cell (MLC) NAND Flash Memory SD Physical Specification Ver. 3.01 (No UHS-I Compliant) SDHC UHS-I microSDHC UHS-I Speed Class SD Speed Class 4 UHS Speed Class 1 UHS Speed Class 1 2 Transfer Rate (Max)* Read 22 MB/s Operating Temperature -40 to +85 C RP-SMKC04 RP-SMKC08 RP-SMKC16 RP-SDF02G RP-SDF04G RP-SDF08G RP-SDF16G by Panasonic Controller Static Wear Levelling, Intelligent Data Writing, Recovery Function from Power Failure, Refresh Function Functions Size 30.0 x 24.0 mm Performance Specifications Performance Specifications *1: SD Memory utilise a portion of the memory for copy protection and other purposes. Therefore Usable capacity will be less. *2: Speed performance is subject to change. RP-SDF02G RP-SDF04G RP-SDF08G RP-SDF16G RP-SMKC04 RP-SMKC08 RP-SMKC16 Model Model 1 1 Capacity* 4 GB 8 GB 16 GB Capacity* 2 GB 4 GB 8 GB 16 GB Flash Memory Type Single-Level Cell (SLC) NAND Flash Memory Flash Memory Type Multi-Level Cell (MLC) NAND Flash Memory MLC SD Physical Specification Ver. 3.01 (UHS-I Compliant) Ver.3.01 eSD (Semiconductor Mounting Type) SD Physical Specification Ver. 3.01 (UHS-I Compliant) (No UHS-I Compliant) Speed Class SD Speed Class 10, UHS Speed Class 1 Read Speed Class SD Speed Class10, UHS Speed Class 1 Transfer Rate 45 MB/s SD Speed Class 6 2 (Max)* Write Read 22 MB/s 90 MB/s 95 MB/s 12 MB/s Transfer Rate 2 (Max)* Operating Temperature -40 to +85 C Write 20 MB/s 40 MB/s 80 MB/s by Panasonic Operating Temperature -40 to +85 C SDHC UHS-I by Panasonic Controller Static Wear Levelling, Intelligent Data Writing, (224 pin) Functions Controller Recovery Function from Power Failure, Refresh Function Functions Static Wear Levelling, Intelligent Data Writing, Recovery Function from Power Failure, Refresh Function UHS Speed Class 1 RP-SVBC04 RP-SVBC08 RP-SVBC16 32.0 x 24.0 mm Size Size 15.0 x 11.0 mm (Max) (4 GB) (8 GB) (16 GB) (Rear surface) Release date under consideration *1: SD Memory utilise a portion of the memory for copy protection and other purposes. Therefore Usable capacity will be less. *2: Speed performance is subject to change. *1: SD Memory utilise a portion of the memory for copy protection and other purposes. Therefore Usable capacity will be less. *2: Speed performance is subject to change. Performance Specifications MLC Model RP-SVBC04 RP-SVBC08 RP-SVBC16 Series P 1 GD Series Capacity* 4 GB 8 GB 16 GB Flash Memory Type Multi-Level Cell (MLC) NAND Flash Memory SD Physical Specification Ver. 3.01 (UHS-I Compliant) Speed Class SD Speed Class 10, UHS Speed Class 1 Transfer Rate Read 90 MB/s 2 (Max)* Write 12 MB/s Operating Temperature -40 to +85 C by Panasonic Controller Static Wear Levelling, Intelligent Data Writing, RP-SDP04G RP-SDP08G RP-SDP16G RP-SDGD32G RP-SDGD64G Functions Recovery Function from Power Failure, Refresh Function Performance Specifications Size 18.0 x 12.2 mm Model RP-SDP04G RP-SDP08G RP-SDP16G *1: SD Memory utilise a portion of the memory for copy protection and other purposes. Therefore Usable capacity will be less. *2: Speed performance is subject to change. 1 Capacity* 4 GB 8 GB 16 GB Flash Memory Type Multi-Level Cell (MLC) NAND Flash Memory Applicable EMC Standards SD Physical Specification Environmental Specifications (Common to all models) Ver.3.01 (No UHS-I Compliant) 1) VCCI Class B (Option B) Speed Class SD Speed Class 4 2) FCC Part 15 Class B (Verification) (Operating) -40 to +85 C Vibration 15 Gp-p Tempe 2 3) EC Directive 89/336/EEC Transfer Rate (Max)* Read 22 MB/s -rature (Non-operating) -40 to +85 C (1,000 h) Shock 1,000 G EN55022: 2006 Class B Operating Temperature -40 to +85 C Humidity 5 to 95 % (No condensation) RoHS Directive Compatibility EN55024: 1998 +A1: 2001 +A2: 2003 4) AS/NZS CISPR Pub22: 2006 by Panasonic Controller Static Wear Levelling, Intelligent Data Writing, Panasonic industrial/automotive use SD memory has a unique Panasonic function that reports data such as bad blocks, writing cycles, Functions Recovery Function from Power Failure, Refresh Function and the SD memory internal connection status. 32.0 x 24.0 mm A special B to B support system also allows Panasonic to offer consultation concerning customisation upon customer request. Size For details, consult a salesperson. Release date under consideration *1: SD Memory utilise a portion of the memory for copy protection and other purposes. Therefore Usable capacity will be less. *2: Speed performance is subject to change.