Product Information

TGSJT

TGSJT electronic component of Panduit

Datasheet
Other Tools 45 Degree TG Jack Termination Tool

Manufacturer: Panduit
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 6.8674 ea
Line Total: USD 6.87

4 - Global Stock
Ships to you between
Tue. 21 May to Mon. 27 May
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
2 - WHS 1


Ships to you between Mon. 27 May to Wed. 29 May

MOQ : 1
Multiples : 1

Stock Image

TGSJT
Panduit

1 : USD 5.8926
10 : USD 5.7477
25 : USD 5.5907
50 : USD 5.4337

     
Manufacturer
Product Category
Brand
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
TGSOCEI electronic component of Panduit TGSOCEI

Wire Ducting & Raceways TG-70 Outside Corner Fitting - Non Adjus
Stock : 0

TGSOCIG electronic component of Panduit TGSOCIG

Panduit TG-70 Outside Corner Fitting - Non Adjus
Stock : 0

TGTEI electronic component of Panduit TGTEI

Wire Ducting & Raceways TG-70 Tee Fitting
Stock : 0

TGTIG electronic component of Panduit TGTIG

Fittings T-Fitting Non-Thread
Stock : 0

TGTIW electronic component of Panduit TGTIW

Wire Ducting & Raceways TG-70 Tee Fitting
Stock : 4

TGTD electronic component of Panduit TGTD

Wire Ducting & Raceways TG-70 Tee Fitting DIV Insert
Stock : 0

TGSOCIW electronic component of Panduit TGSOCIW

Wire Ducting & Raceways TG-70 Outside Corner Fitting - Non Adjus
Stock : 0

TGTAW electronic component of Panduit TGTAW

Tee fitting. Used to join sections of TG raceway at tee intersections.
Stock : 0

TGTRAW electronic component of Panduit TGTRAW

TG-70 Transition Fitting to T-45
Stock : 0

TGSOCAW electronic component of Panduit TGSOCAW

TG-70 Outside Corner Fitting - No
Stock : 0

Image Description
1ZCS08 electronic component of Apem 1ZCS08

Switch Bezels / Switch Caps Round Button RED
Stock : 50

SSBOLT50125-C electronic component of Panduit SSBOLT50125-C

Screws & Fasteners Stainless Steel,1/2-13 X 1 1/4" HEX HEAD
Stock : 0

SBBOLT50150-C electronic component of Panduit SBBOLT50150-C

Screws & Fasteners 1/2"-13 UNC X 1 1/2"LG. HEX BOLT Full Th
Stock : 0

10-1155 electronic component of Apem 10-1155

Switch Fixings O RING
Stock : 145

1Q001 electronic component of Apem 1Q001

Switch Bezels / Switch Caps Button Blue/ Lens Transparent
Stock : 0

LCMD16-12-Q electronic component of Panduit LCMD16-12-Q

Terminals Copper Compression Metric Lug, 2 Hole, 1
Stock : 0

BP4-14T-C electronic component of Panduit BP4-14T-C

Panduit Multi Tap Connector, Double Sided, Black
Stock : 0

UICFPHSE2BL electronic component of Panduit UICFPHSE2BL

Panduit
Stock : 0

UICFPHSE4BL electronic component of Panduit UICFPHSE4BL

Panduit
Stock : 0

1692004 electronic component of Apem 1692004

Industrial Panel Mount Indicators / Switch Indicators Pinhead Led, Yellow RoHS comp
Stock : 83

45 Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com UTP Jack Modules SPECIFICATION SHEET 45 Angled Wire Caps for Mini-Com UTP Jack Modules specifications Up/Down 45 Angle Caps 45 angled wire caps, when mated with compatible UTP jack TX6A : CJUDCAPBU-% modules, shall provide improved cable routing to jacks in confined TX6 PLUS: CJUDCAPIW-% spaces. Angled wire caps shall terminate 4-pair, 22 - 26 AWG, 100 TX5e : CJUDCAPRD-% Left/Right 45 Angle Caps ohm unshielded twisted pair cable and shall use a forward motion TX6A : CJLRCAPBU-% termination method to optimize performance by maintaining cable pair TX6 PLUS: CJLRCAPIW-% geometry while eliminating conductor untwist. TX5e : CJLRCAPRD-% The wire caps shall be color-coded to designate performance category Compatible Mini-Com UTP Jack Modules TX6A UTP with MaTriX and shall include a universal label coded for T568B wiring schemes. Technology Mini-Com UTP Jack Modules technical information TX6A : CJ6X88TG* Channel and Exceeds channel and component requirements of ANSI/TIA-568-C.2 and ISO 11801 TX6 PLUS: CJ688TG* component standards for the respective Category or Class performance levels at the designated TX5e : CJ5E88TG* performance : swept frequencies for that Category or Class Mini-Com Spring Shuttered UTP Jack Modules IEC compliance : Meets IEC 60603-7 TX6A : CJH6X88TG* TX6 PLUS: CJH688TG* RoHS compliance: Compliant TX5e : CJH5E88TG* PoE compliance : Supports 2500 connection cycles with IEEE 802.3af / 802.3at and proposed Tools and Accessories 802.3bt type 3 and type 4 Jack module UL rated : UL 1863 and UL 2043 Termination tool: TGSJT Wire snipping tool: CWST Operating -10C to 65C (14F to 149F) Wire stripping tool: CJAST temperature: % = Package size (X = 10, C = 100) Conductor Compatible with 22 26 AWG solid or stranded cable with conductor insulation * To designate color, add suffix IW (Off White), termination range: diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in EI (Electric Ivory), IG (International Gray), AW (Arctic White), BL (Black), BU (Blue), Depth reduction Allows 55% reduction in cable routing depth compared to straight exit wire cap RD (Red), YL (Yellow), GR (Green), provided: with both allowing proper cable bend radius for 0.275 inch (6.99 mm) diameter OR (Orange,) BR (Brown), GD (Gold), LB cable (0.500 with angled caps vs. 1.100 with straight exit caps) (Light Blue), PK (Pink) or VL (Violet). When mated to compatible UTP jack modules. key features and benefits Angled cable exit: Large diameter cable can be routed to jacks in tight spaces while maintaining proper bend radius also can be used on multiple jacks positioned next to each other Reversible direction Both wire cap versions can be inserted into compatible jacks in either design: direction, bringing the convenience of needing only two parts to handle up, down, left, or right cable routing needs Wide compatibility: Immediate compatibility with Panduits most common Mini-Com UTP jacks Economical: Angled wire caps can easily be applied to new or already installed compatible jacks to gain routing advantages without needing to purchase new jacks Uses enhanced Giga-TX Optimizes performance by eliminating conductor untwist and reduces Technology: installation time and expense Consistent termination Similarity in both conductor management and termination method to design: Panduits most common straight exit Mini-Com UTP jacks ensures minimal learning curve and fast field terminations Termination tool available: TGSJT termination tool functions for both wire cap versions and ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability applications 45 Angled Wire Caps can be used with compatible deployed in office and furniture applications, since TX6A, TX6 PLUS and TX5e Mini-Com UTP Jack their angled routing better accommodates the larger Modules where ever an angled cable exit from the bundle diameter and bigger bend radius of Category modular jack is desired and in confined jack 6A cable. mounting spaces such as in modular furniture, raceway, and wall outlets with conduit. 45 Angled Wire Caps are especially beneficial for use with Category 6A cabling which is increasingly being www.panduit.com 45 Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com UTP Jack Modules Up/Down 45 TG Wire Cap Left/Right 45 TG Wire Cap CJUDCAPBU- , CJUDCAPIW- , CJUDCAPRD- CJLRCAPBU- , CJLRCAPIW- , CJLRCAPRD- (See Installation Instruction PN610) (See Installation Instruction PN609) 0.96 0.63 0.61 0.96 24.3 16.1 15.4 24.4 0.61 15.4 0.63 16.1 TGSJT Termination Tool (Required for terminating 45 Angled Wire Caps) Wall thickness >1mm 0.039 . Dimensions are in inches. Dimensions in brackets are metric.

Tariff Desc

8203.20 crimpers but NOT including crimping tools put up in packs containing electrical connectors TC8532098

8205.40.00 TC0844020 SCREWDRIVERS

8203.30.00 TC9900293 NIPPERS diagonal spring loaded with insulated handles length NOT exceeding 125mm

8203.20.00 TC0844180 PLIERS being ANY of
a aviation slip pliers
b bent nose pliers
c combination pliers,length NOT less than 210mm
d cutting pliers
e end nipper pliers
f groove joint pliers
g linesman pliers, length NOT less than 210mm
h lock grip pliers
i long nose pliers
j long reach pliers
k round nose pliers
l slip joint pliers
m snap ring pliers
n straight nose pliers
o welding clamp pliers
p wire stripper plier

8204.11.00 TC9810512 SPANNERS drop forged

8204.12.00 TC0110440 SPANNERS AND WRENCHES adjustable non calibrated

8204.11.00 TC0107157 SPANNERS AND WRENCHES non adjustable being ANY:
a combination open end and ring
b open end
c ring

8205.70.00 TC0302773 CLAMPS

8205.70.00 TC0302754 VICES

8204.11.00 TC0405019 HAND TOOLS being EITHER of the following
a allen key sets
b hex keys

9017.30.00 50 Micrometers callipers and gauges Free

8204.20.00 TC0009108 SOCKETS AND/OR SOCKET ACCESSORIES being ANY of
a sockets
b reducers
c tommy bars with sliding T handles
d extensions
e ratchets with coupler
f reversible ratchets
g couplers
h universal joints
i L-handles
j speed braces
k converters
l swivel handles
m driving handles socket drivers
n ratchet adaptors

8203.10.00 TC0302774 FILES OR RASPS

8206.00.00 TC0831549 KITS TOOL comprising not LESS than ANY two of
a allen keys
b chisels
c crimpers
d files
e hammers
f multi grips
g pliers
h punches
i saws
j screwdrivers
k shears
l snips
m sockets
n spanners
o wrenches

8425.42.00 TC9404347 JACKS, hand, hydraulic, having a maximum capacity of 2500kg

8207.50.00 TC9600818 DRILL BITS MASONARY having BOTH the following
a slotted shank
b hammer proof carbide tip
Panduit Canada
Panduit Corp
PANDUIT CORPORATION
PDT

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted