WWW.PHIHONG.COM 19.6W Power over Ethernet Adapter DC Input Single Port Injector Features Detection and Classification per Full Protection OCP, OVP IEEE802.3af Gigabit Compatible Diagnostic LEDs 1 Year Warranty Non-Vented Case Lowest cost DC Input Power Injector DC Input Voltage 18-72VDC Applications IP Telephones Security Cameras Wireless Network Access Points IP Print Servers Blue Tooth Access Point Safety Approvals CE Mechanical Characteristics Length: 140mm (5.51in) Height: 36mm (1.42in) Width: 65mm (2.55in) Weight: 0.2Kg (0.44lb.) Output Specifications DC Output Load Regulation Model Voltage Line Load Min. Max. 1 POE20D-1AF-R 56V 0A 0.35A 54-57Vdc under all conditions Notes: (1) Consult factory for availability Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/3/2018 POE20D 1AF Characteristics WWW.PHIHONG.COM INPUT: DC Input Voltage Range 18 to 72VDC Immunity ESD: EN61000-4-2. Level 3 DC Input Current RS: EN61000-4-3. Level 3 1.5A for 18V DC and maximum load EFT: EN61000-4-4. Level 2 Surge: EN61000-4-5. Level 3 OUTPUT: CS: EN61000-4-6. Level 3 Total Output Power Voltage Dips EN61000-4-11 19.6W at 56VDC Harmonic: EN61000-3-2 DC Offset Insulation Resistance No data degradation with DC imbalance 18mA Primary to Secondary: >10M OHM 500VDC Primary to Field Ground: >10M OHM Efficiency 500VDC 80% at maximum load (>36 to 72VDC) 75% at maximum load(18 to <36VDC) FEATURES: Over Voltage/Current, Short Circuit Ripple and Regulation Protection 100mV maximum at ambient 25C Outputs equipped with short circuit protection and overload protection as per 802.3af Transient O/P Voltage Protection specification 60V maximum at switch on and off The output can be shorted permanently without damage ENVIRONMENTAL: Temperature Indicators Operation -20 to +50C Green LED 1: Input power ON Non-operation -25 to +85C Red LED: Fault detected Humidity 5 to 90% Green LED 2: Valid IEEE802.3af load detected and connected EMC Complies with FCC Part 15 Class B Input Connector Complies with EN55032 Class B Anytek OQ0355510000G Mate Anytek TJ0350520000G or Isolation Test TJ035152000G Primary to Secondary: 2121VDC for 1 minute, Anytek is part of Giga-Way Technology Corp 10mA Primary to Field Ground: 2121VDC for 1 Output Connection minute, 10mA +pins 3, 6 Output to Field Ground: 2121VDC for 1 -pins 1 ,2 minute, 10mA Warranty 1 Year