WWW.PHIHONG.COM 60W Single Port Power over Ethernet Midspan IEEE802.3bt Compliant Power Injector Features Compliant with IEEE802.3bt Standard Limited Power Source Compliant with Phihong Proprietary Single Source 4 Pair Power Current 12.5K Detection Sharing Non-Vented Case Broken Wire Detection 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Gigabit Compatible Full Protection OVP, OCP 1 Year Warranty Applications IP Telephones Security Cameras Wireless Access Points IP Print Servers Bluetooth Access Points WiMAX Access Points Safety Approvals cUL/UL CE Mechanical Characteristics Length: 140mm (5.51in.) Height: 36mm (1.42in.) Width: 65mm (2.55in.) Weight: 0.2Kg (0.47lbs) Output Specifications 1 Load Regulation DC Output Model AC Input 2 Voltage Min. Max. Line Load +56VDC +1V/-3V POE60U-1BT 3 Wire C14 56V 10mA 1.07A (57-53VDC) Notes: 1. Voltage measured within 2 of the output RJ45 connector on data pairs 3,6(+) and 1,2(-) 2. Combined output on data pairs and spare pairs. Otherwise 535mA on data pairs 3,6(+) 1, 2(-) and spare pairs 4,5(+) 7,8(-) Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 5/29/2018 POE60U-1BT Characteristics WWW.PHIHONG.COM INPUT: Isolation Test AC Input Voltage Range Primary to Secondary: 4242VDC for 1min 90VAC to 264VAC 10mA Primary to Field Ground: 2121VDC for 1min, AC Input Voltage Rating 10mA 100 to 240VAC Immunity AC Input Current ESD: IEC61000-4-2. Level 3 2.0A (RMS) max for 90VAC RS: IEC61000-4-3. Level 3 1.2A (RMS) max for 240VAC EFT: IEC61000-4-4. Level 2 Surge: IEC61000-4-5. Level 3 Leakage Current CS: IEC61000-4-6. Level 2 3.5mA max 264VAC/50Hz Voltage Dips IEC61000-4-11 Harmonic: IEC61000-3-2 Class A AC Inrush Current 40A (RMS) max for 115VAC Insulation Resistance 80A (RMS) max for 230VAC Primary to Secondary: >10M OHM 500VDC Primary to Field Ground: >10M OHM OUTPUT: 500VDC Total Output Power 60W 40C FEATURES: 30W 50C Over Current Protection Output 1(OUT) <650mA Output Ripple Output 2(OUT) <650mA 100mV max 25C, 100-240VAC Output 1 and 2 Combined(OUT) <1300mA Efficiency Over Voltage Protection 75% (typical) at max load,120VAC 60Hz Meets UL requirements Hold-up Time Short Circuit Protection 10mS min. 120VAC/60Hz max load Output can be shorted permanently without damage ENVIRONMENTAL: Temperature LED Indicators Operation -10C to +40C for 60W No LED - Power failure >40C to +50C for 30W Green LED short Blinking - POE power ready Non-operation -20C to +65C but no connection Humidity 5 to 90% Green LED solid - POE output power good Green/Red LED alternate short blinking - POE EMC detection failure Complies with FCC Class B Green LED short/Red long blinking - POE Complies with EN55032 Class B output over power or short Revision 5/29/2018