PSA065-240(M)-R Phihong

WWW.PHIHONG.COM 65 Watt* Open-Frame Power Supply PSA065 Single Output 2 x 4 Series (for ITE) *45W Convection, 65W 20CFM Airflow cooling Features 2 x 4 Footprint Low Profile Design Fits 1U Applications Low-Cost Applications Telecom/Datacom Industrial Peripherals Safety Approvals cUL/UL 60950-1 CB CE Mechanical Characteristics Length: 101.6mm (4.0in) Height: 30.6mm (1.2in) Width: 50.8mm (2.0in) Weight: 160g (5.64oz) Output Specifications Line Ripple (1) Regulation DC Output Model Voltage Min. Convection 20cfm P-P (max) Line Load PSA065-120 +12V 0A 3.75 5.42A 120mV 2% 2% PSA065-240 +24V 0A 1.88 2.71A 240mV 2% 2% PSA065-480 +48V 0A 0.94 1.36A 480mV 2% 2% (1) Measured by using a 12 inch twisted pair terminated with a 10uF capacitor and a 0.1uF ceramic in parallel, measured at maximum load after a 20 minute warm up and bandwidth set to 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 3/10/2016 WWW.PHIHONG.COM PSA065 Characteristics Input: Humidity AC Input Voltage Rating Operation 5 to 95% non-condensing 100 to 240V AC Emissions AC Input Voltage Range FCC Class B 90 to 264V AC EN55022 Class B AC Input Frequency Immunity 47 to 63Hz EN55024 1998 EN61000-4-2 Level 3 Input Current EN61000-4-3 Level 2 1.5A at maximum load and 115V AC EN61000-4-4 Level 3 0.75A at maximum load and 230V AC EN61000-4-5 Level 3 EN61000-4-6 Level 2 Leakage Current EN61000-4-11 100uA maximum at 264V AC EN61000-3-2 Harmonic Class A EN61000-3-3 Flicker Inrush Current 30A for 1150V AC at maximum load General: 60A for 230V AC at maximum load Insulation Resistance (Cold start at ambient 25C) 10M Ohm minimum, 500V DC Hold-up Time 10mS typical at maximum load and 115V AC Dielectric Withstand (Hi-pot) Test Input to Ground: 1600V AC for 3 seconds, 10mA Output: Input to Output: 4200V AC for 3 seconds, 10mA Efficiency 80% minimum at maximum load and 115V AC Switching Frequency 50K Hz typical Over-Voltage Protection +48V DC at +72V DC maximum MTBF (Full load and 110V AC, 25C) >100K Hrs Over-Current Protection Auto-restart Input Connector Molex 09-51-4034 housing with Molex 08-50-0106 pins Input Protection Fuse in line and neutral DC Output Connector Molex 26-03-4041 housing with Molex 08-50-0189 Environmental: pins. Temperature Operation 0 to 50C PSA065 Dimension Diagram: Unit mm Non-operation -25 to +85C