R w a A r E r 4:1 Wide Input Voltage Range Features 1.6kVDC Isolation DC/DC Converter UL Certified Efficiency up to 89% Regulated Six-Sided Continuous Shield Converters Available as Power Module (RPM40-GW) RP40-GW Description 40 Watt The RP40-GW series wide input range DC/DC converters are certified to UL 60950-1 and to cUL 3 60950-1. This makes them ideal for all telecom and industrial applications where approved safety 2 x 2 standards are required. The industry standard 2 x 2 package meets military standards for thermal shock and vibration tolerance. Single, Dual Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3,4) RP40-243.3SGW 9-36 3.3 10000 1580 87 25750 (3,4) RP40-2405SGW 9-36 5 8000 1894 88 13600 (3,4) RP40-2412SGW 9-36 12 3333 1916 87 2360 (3,4) RP40-2415SGW 9-36 15 2666 1915 87 1510 (3,4) RP40-483.3SGW 18-75 3.3 10000 790 87 25750 (3,4) RP40-4805SGW 18-75 5 8000 936 89 13600 (3,4) RP40-4812SGW 18-75 12 3333 958 87 2360 (3,4) RP40-4815SGW 18-75 15 2666 947 88 1510 (3,4) RP40-2412DGW 9-36 12 1667 1938 86 1200 (3,4) RP40-2415DGW 9-36 15 1333 1938 86 750 (3,4) RP40-4812DGW 18-75 12 1667 958 87 1200 (3,4) RP40-4815DGW 18-75 15 1333 969 86 750 Notes: Note1: Maximum value at nominal input voltage and full load of standard type. Note2: Test by minimum Vin and constant resistor load. E196683 UL60950-1 Certified Model Numbering RP40- GW/ (4) Package Input Voltage (3) Control Logic Output Voltage Single or Dual Ordering Examples RP40-2405SGW = 24V 4:1 Input, 5V Output, Positive Logic CTRL pin. RP40-4812DGW/N-HC = 48V 4:1 Input, 12V Output, Negative Logic CTRL pin, Heat-sink fitted Notes: Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF) and trim pin add suffix N for CTRL function with Negative Logic (0=ON, 1=OFF) and trim pin Note4: add suffix -HC for premounted Heat-sink and clips www.recom-power.com REV.: 1/2016 PD-1 a Y n t 3 y87 86 RP40-GW DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom. Vin= 24V 9VDC 24VDC 36VDC Input Voltage Range nom. Vin= 48V 18VDC 48VDC 75VDC DC-DC ON 9VDC Vin = 24V DC-DC OFF 8VDC Under Voltage Lockout (UVLO) DC-DC ON 18VDC Vin = 48V DC-DC OFF 16VDC (5) Input Filter Pi-Type (6) Input Reflected Ripple Current nominal Vin and full load 20mAp-p Vin= 24V, 100ms max. 50VDC Input Surge Voltage Vin= 48V, 100ms max. 100VDC Power up 20ms Start-up time Remote ON/OFF 20ms (7) Operating Frequency Range 270kHz 300kHz 330kHz 0% Minimum Load of full load 10% Single 3.3V, 5V 50mVp-p Single 12V, 15V 75mVp-p Ripple and Noise measured by 20MHz bandwidth Dual 12Vout 120mVp-p Dual 15Vout 150mVp-p DC-DC ON Open or 3.0V < Vr < 12V Positive Logic DC-DC OFF Short or 0V < Vr < 1.2V (8) Remote ON/OFF DC-DC ON Short or 0V < Vr < 1.2V Negative Logic DC-DC OFF Open or 3.0V < Vr < 12V 24Vin DC-DC OFF 10mA 48Vin DC-DC OFF 5mA Input current of Remote pin (CTRL) DC-DC ON -0.5mA 0.5mA Notes: Note5: An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220F/100V, ESR 90m . Note6: Simulated source impedance of 12H. 12H inductor in series with +Vin. Note7: Operating frequency for dual output: master (5Vout) 300KHz slave (3.3Vout) 500KHz. Note8: The ON/OFF control pin voltage is referenced to -Vin pin. RP40-2405SGW Efficiency vs. Output Current Efficiency vs. Input Voltage 95 90 90 89 85 80 88 75 70 65 60 85 55 9Vin 50 24Vin 84 45 36Vin 40 83 9 12 15 18 21 24 27 30 33 36 10 20 30 40 50 60 70 80 90 100 Output Current % Input Voltage VDC continued on next page PD-2 REV.: 1/2016 www.recom-power.com Efficiency % Efficiency %