BA12004DF-ZE2 ROHM

Datasheet 7 Circuits Darlington Transistor A rray BA12003DF-Z BA12004DF-Z General Description Packages W(Typ) x D(Typ) x H(Max) BA12003DF-Z, BA12004DF-Z are darlington transistor SOP-J16A 9.90mm x 6.00mm x 1.725mm array consist of 7circuits, input resistor to limit base current and output surge absorption clamp diode. Features Built-in 7 circuits High output break down voltage High DC output current gain Built-in input resistor to limit base current Built-in output surge absorption clamp diode SOP-J16A Applications BA12003DF-Z / BA12004DF-Z Motor Drivers LED Drivers Solenoid Drivers Low Side Switch Key Specifications Output break down voltage VCE=60V(max) Output current Io=500mA/ch(max) Operating supply voltage range -0.5V to +30V Operating temperature range -40C to +85C DC current gain hfe=1000(min) Input resistor BA12003DF-Z Rin=2.7k BA12004DF-Z Rin=10.5k Typical Application Circuit VCC VCC VCC 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 COM Product structure: Silicon integrated circuit This product has not designed protection against radioactive rays www.rohm.com TSZ02201-0GPG0GZ00010-1-2 2017 ROHM Co., Ltd. All rights reserved. 1/13 TSZ2211114001 27.Aug.2020 Rev.010 Not Recommended for New DesignsBA12003DF-Z BA12004DFZ Pin Configuration Block Diagram SOP-J16A (TOP VIEW) 16 15 14 13 12 11 10 9 OUT OUT OUT OUT OUT OUT OUT COM 1 2 3 4 5 6 7 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 IN1 IN2 IN3 IN4 IN5 IN6 IN7 GND Pin Description Pin No. Pin Name Function Pin No. Pin Name Function 1 IN1 Input 1 9 COM Clamp diode cathode 2 IN2 Input 2 10 OUT7 Output 7 3 IN3 Input 3 11 OUT6 Output 6 4 IN4 Input 4 12 OUT5 Output 5 5 IN5 Input 5 13 OUT4 Output 4 6 IN6 Input 6 14 OUT3 Output 3 7 IN7 Input 7 15 OUT2 Output 2 8 GND Ground 16 OUT1 Output 1 I/O Equivalence Circuit COM Pin.9 COM Pin.9 OUT OUT 2.7k 10.5k Pin.10 to 16 Pin.10 to 16 IN IN Pin.1 to 7 Pin.1 to 7 7.2k 3k 7.2k 3k GND Pin.8 GND Pin.8 BA12003DF-Z BA12004DF-Z Note : The diode indicating the junction with a dotted line is a parasitic element. Note : The input and output parasitic diodes cannot be used as clamp diodes. www.rohm.com TSZ02201-0GPG0GZ00010-1-2 2017 ROHM Co., Ltd. All rights reserved. 2/13 TSZ2211115001 27.Aug.2020 Rev.010 Not Recommended for New Designs