Product data sheet 9013GHG2J63 Characteristics pump or compressor switch 9013GH - adjustable diff. - 145-175 psi Main Range of product Square D Pumptrol Pressure sensor name 9013GH Pressure sensor size 200 psi (40...170 psi) Value of setting 145...175 psi Electrical circuit type Power circuit Product specific appli- Control electrically driven water pumps and air com- cation pressors Quantity per set 1 Type of packing Individual Complementary Pressure sensor type Electromechanical pressure switch Controlled fluid Fresh water (-22...257 F) Air (-22...257 F) Adjustable range on rising pressure 65...200 psi Approximate adjustable differential 20...40 psi Destruction pressure 300 psi Pressure actuator Diaphragm Pressure switch type of operation Regulation between 2 thresholds Scale type Adjustable differential Setting Internal Local display Without Contacts type and composition 2 NC, snap action, DPST-DB, Form YY Cable entry number 3 knock-outs for 1/2 conduit UL 508 Electrical connection Screw-clamp terminals, clamping capacity: 5.261 mm Screw-clamp terminals, clamping capacity: 10 AWG Fluid connection type 0.25 inch NPSF internal conforming to UL 508 Short circuit protection 20 A by cartridge fuse, type gG Materials in contact with fluid Nitrile (Buna-N) or equivalent rubber diaphragm Zinc plated steel or equivalent flange Material Noryl thermoplastic resin or equivalent cover Polypropylene cover Operating position Any position Motor power kW 3.7 kW (5 hp) at 575 V AC, 3 phases 3.7 kW (5 hp) at 575 V AC, 1 phase 3.7 kW (5 hp) at 460 V AC, 3 phases 3.7 kW (5 hp) at 460 V AC, 1 phase 3.75 kW (5 hp) at 230 V AC, 3 phases 0.75 kW (1 hp) at 230 V DC 0.75 kW (1 hp) at 115 V DC 2.2 kW (3 hp) at 230 V AC, 1 phase 2.2 kW (3 hp) at 115 V AC, 3 phases 1.5 kW (2 hp) at 115 V AC, 1 phase Electrical durability 100000 cycles at 10 cyc/mn Mechanical durability 300000 cycles Terminal block type 4 terminals Operating rate 10 cyc/mn Ui rated insulation voltage 575 V conforming to UL 508 Nov 10, 2014 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Product weight 2.25 lb(US) Repeat accuracy +/- 3 % Terminals description ISO n1 L1-T1 L2-T2 Width 3.44 in Height 5.4 in Depth 3.88 in Factory modification - Environment Standards CE UL 508 NSF ANSI 372 Ambient air temperature for operation -33...257 F Ambient air temperature for storage -33...257 F Protective treatment None NEMA degree of protection NEMA 1 conforming to UL 50 IP degree of protection IP20 conforming to IEC 60529 Product certifications UL listed file E12158 CSA file LR25490 Offer Sustainability Sustainable offer status Green Premium product RoHS Compliant - since 1150 - Schneider Electric declaration of conformity Product environmental profile Available Download Product Environmental Product end of life instructions Available Download End Of Life Manual 2