E53TP25C Sensata

Panel Mount DataSheet 53TP Series IP20 Three-phase solid-state relay Ratings 25 A, 50 A per phase 48-530 VAC 2 package styles IP20 or IP00 (See IP00 spec sheet for more information) SCR output for heavy industrial loads AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output LED input status indicator Transient protection built in PRODUCT SELECTION Control Voltage 25 A 50 A 90-140 VAC B53TP25C B53TP50C 80-260 VAC C53TP25C C53TP50C 4-32 VDC D53TP25C D53TP50C 18-36 VAC E53TP25C E53TP50C AVAILABLE OPTIONS Type Cover Relay Options TP: 3 switched channels C: IP20 Blank: Zero Voltage Turn-On -10: Random Turn-On Series TP D 53 25 C H -10 Load Current/per phase Relay Options Control Voltage 25: 25 Amps H: Thermal pad installed B: 90-140 VAC 50: 50 Amps C: 180-260 VAC D: 4-32 VDC E: 18-36 VAC Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description 25 A 50 A Operating Voltage (47-63Hz) Vrms 48-530 48-530 Transient Overvoltage Vpk (2) 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 3 3 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 Maximum Load Current Arms (3) 25 50 Minimum Load Current Arms 0.1 0.1 Maximum 1 Cycle Surge Current (50/60Hz) Apk 275/300 710/750 Maximum 1 Second Surge Current 50/60 Hz Apk 85 150 Maximum On-State Voltage Drop Rated Current Vpk 1.35 1.35 Thermal Resistance Junction to Case (Rjc) C/W 0.24 0.12 Maximum 1/2 Cycle It for Fusing (50/60 Hz) A sec 380/370 2520/2320 Minimum Power Factor (with Maximum Load) 0.5 0.5 UL/IEC 60947 Motor Control Ratings at 120V HP/KW (4) 0.75/0.56 1.5/1.11 UL/IEC 60947 Motor Control Ratings at 240V HP/KW (4) 1/0.74 3/2.22 UL/IEC 60947 Motor Control Ratings at 380V HP/KW (4) 2/1.48 5/3.7 UL/IEC 60947 Motor Control Ratings at 480V HP/KW (4) 3/2.22 7.5/5.55 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet (1) INPUT SPECIFICATIONS Description D53 B53 C53 E53 18-36 VAC Control Voltage Range 4-32 VDC 90-140 VDC 180-260 Vrms Minimum Turn-On Voltage 4.0 VDC 90 180 18 Minimum Turn-Off Voltage 1.0 VDC 10 10 2 15 mA Minimum Input Current (for on-state) 24 mA 7.0 mA 7.0 mA Maximum Input Current 35 mA 16 mA 20 mA 20 mA Nominal Input Impedance Current Regulated Current Regulated Current Regulated Current Regulated 20 Maximum Turn-On Time msec (5) 8.33 20 20 Maximum Turn-Off Time msec 8.33 30 30 30 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40C to 80C Ambient Storage Temperature Range -40C to 125C Weight (typical) 13.1 oz (370g) Encapsulation NA Terminals Hardware Furnished, mounted Screws and Saddle clamps Zinc plated Steel Input Terminal Screw Torque Range: in lbs/Nm 8-10 / 0.9-1.1 Output Terminal Screw Torque Range: in lbs/Nm 15-20 / 1.7-2.2 GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, see page 3 for derating curves. 4) At 40C Ambient temperature. 5) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models) MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters 4.0 101.3 3.6 92.0 5/L3 3/L2 1/L1 1.87 47.6 3.2 79.7 0.2 5.1 6/T3 4/T2 2/T1 0.8 19.3 1.5 38.6 1.45 36.83 4.09 103.9 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.