HS103DR SERIES ASSEMBLIES DIN RAIL MOUNT Features 55 amp AC output 40C Single Channel or 3 Phase output 3 to 32 VDC input control voltage DIN Rail mounted UL, CSA, VDE, CE approved SSRs Epoxy free design SPECIFICATIONS (1) Output HS103DR-D2490 HS103DR-HD6090 Description 24-280 48-660 Operating Voltage (47-63Hz) Vrms 600 1200 Transient Overvoltage Vpk 1.0 1.0 Maximum Off-State Leakage Current Rated Voltage mArms 500 500 Minimum Off-State dv/dt Maximum (2) Rated Voltage V/sec 55 55 Maximum Load Current Arms 150 150 Minimum Load Current Arms 1200 1200 Maximum Surge Current (16.6ms) Apk 1.15 1.15 Maximum On-State Voltage Drop Rated Current Vac 6000 6000 Maximum It for Fusing (8.3 msec) A sec 0.5 0.5 Minimum Power Factor (with Maximum Load) Page 1 www.sensata.com Copyright 2018 Sensata Technologies, Inc. (1) Input HS103DR-D2490 HS103DR-HD6090 Description 3-32 VDC 4-32 VDC Control Voltage Range 3.0 VDC 4.0 VDC Minimum Turn-On Voltage 1.0 VDC 1.0 VDC Minimum Turn-Off Voltage -32 VDC -32 VDC Maximum Reverse Voltage 7.0 mA 7.0 mA Minimum Input Current 12 mA 12 mA Maximum Input Current Curent Regulated Curent Regulated Nominal Input Impeadance Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle General HS103DR-Dxx90 Description 4000 Vrms Dielectric Strength, Input/Output/Base (50/60Hz) 10 9 Ohms Minimum Insulation Resistance ( 500 V DC) 8 pF Maximum Capacitance, Input/Output -40 to 80C Ambient Operating Temperature Range -40 to 125C Ambient Storage Temperature Range None Status Indicator Display 1.36 lb. (619 g) Weight (typical) 6-32 Screws - 13-15/1.5-17. 8-32 Screws - 18-20/2-2.2. (Screws dry without grease) Recommended Terminal Screw Torque Range: (in-lbs/Nm) Yes Thermal pad installed PRODUCT SELECTION 55A 55A Description HS103DR-D2490 HS103DR-HD6090 3-32 VDC Control GENERAL NOTES (1) All parameters at 25C unless otherwise specified. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Page 2 www.sensata.com Copyright 2018 Sensata Technologies, Inc.