SOL2A1 Sensata

SOL Series Industrial Solenoid Valves For liquid or gas* use Full range of sizes from 3/8 to 2 (BSP) 2 port, normally open (NO) and normally closed (NC) versions Pilot operated Brass body 24Vdc, 110Vac and 230Vac operations available The SOL Series is a range of 2-way solenoid valves which are pilot- operated and are available in a choice of 110Vac, 230Vac or 24Vdc coils to suit the required voltage. Ideal for use in a wide range of industrial and commercial applications such as autoclaves, cooling plant and equipment, watering plant, fire extinguishing systems, hygienic & sanitary applications as well as water jet machinery and many other fluid control uses. General Features The electro-pilot of the pilot-operated solenoid valves is not directly responsible for opening (closing) the solenoid valve. The solenoid valve presents three sequential chambers : - inlet chamber Ci (upstream of the diaphragm) - compensating chamber Cc (downstream of the diaphragm and upstream of the electro-pilot) - outlet chamber Cu(downstream of the electro-pilot). In the 2/2-way normally closed (NC) solenoid valve, Ci & Cc are communicating by means of a compensating hole when the coil is de- energised. Therefore, the diaphragm is in a condition of balanced pressure level and DN tightness is ensured by the retaining spring load from the same diaphragm. When the coil is energised by acting on the electro-pilot, there is and immediate communication between Cc and Cu the sudden increase in volume of the pressurised fluid over the diaphragm (Cc+Cu>Ci) causes a pressure drop. The diaphragm is no longer in a condition of balanced pressure level and it swells up in the higher pressure direction thus raising up and opening the DN to let the fluid flow. * Group 2 gases. MechanicalCharacteristics ElectricalCharacteristics Bodymaterial Forgedbrass Electrical insulationclass I Plunger Magneticstainlesssteel Temperatureclass H Gaskets NBR ProtectionClass(withconnector) IP65 80C T Maximum Typeofservice Continuous room -20C T Minimum Coil approval VDE fluid 90C T Maximum fluid Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com ISO9001CERTIFIED SOL 2018 www.cynergy3.com 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.SOL Series Industrial Solenoid Valves Operating Solenoid Dimension(mm) Pressure(bar) MaxFlow PartNo. Operation Size OperatingTemp Voltage Power DN CH.A B C E F L H Min Max (m3/hr) SOL1A1 NO 24Vdc 10W SOL1B1 NC SOL1A3 NO 110Vac 10.5VA G3/8 11.5 24 12 32.5 42 38 57 93.5 0.1 15 1.7 -20to+90DegC SOL1B3 NC SOL1A4 NO 230Vac 9VA SOL1B4 NC SOL2A1 NO 24Vdc 10W SOL2B1 NC SOL2A3 NO 110Vac 10.5VA G1/2 13.5 30 15 40 45 41 69 101 0.1 15 3.8 -20to+90DegC SOL2B3 NC SOL2A4 NO 230Vac 9VA SOL2B4 NC SOL3A1 NO 24Vdc 10W SOL3B1 NC SOL3A3 NO 110Vac 10.5VA G3/4 183618 46.6 54 50 74 108 0.2 15 5-20to+90DegC SOL3B3 NC SOL3A4 NO 230Vac 9VA SOL3B4 NC SOL4A1 NO 24Vdc 10W SOL4B1 NC SOL4A3 NO 110Vac 10.5VA G1 2645 22.5 6071 67 93 120 0.2 12 11 -20to+90DegC SOL4B3 NC SOL4A4 NO 230Vac 9VA SOL4B4 NC SOL5A1 NO 24Vdc 19W SOL5B1 NC SOL5A3 NO 110Vac 21VA G1-1/4 32 55 27.5 73.5 87 79 111 146 0.4 12 17 -20to+90DegC SOL5B3 NC SOL5A4 NO 230Vac 15VA SOL5B4 NC SOL6B1 24Vdc 19W NC SOL6B3 110Vac 21VA NC G1-1/2 45623185 110 100 138 154 0.4 10 27 -20to+90DegC SOL6A4 230Vac 9VA NO SOL6B4 230Vac 15VA NC SOL7B1 24Vdc 19W NC SOL7B3 110Vac 21VA NC G2 50 75 37.5 99 110 100 145 168 0.4 10 26 -20to+90DegC SOL7A4 9VA NO 230Vac SOL7B4 15VA NC Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com ISO9001CERTIFIED www.cynergy3.com 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.