SPA4191

SPA Series Mini-SIP SSR Ratings to 1A 280 VAC SCR output DC control Zero-crossing (resistive loads) output t-control input 10-35mA curren PRODUCT SELECTION Control Voltage 1A 1A 10-35 mA SPA4191 SPA6191 OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) Vrms 20-140 20-280 Transient Overvoltage Vpk 400 600 Maximum Off-State Leakage Current Rated Voltage mArms 0.01 0.01 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 500 Maximum Load Current Arms (3) 1.0 1.0 Minimum Load Current Arms 0.025 0.025 Maximum Surge Current (16.6ms) Apk 30 30 Maximum On-State Voltage Drop Rated Current Vpk 1.5 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 INPUT SPECIFICATIONS (1) Description DC Control Control Current Range 10-35 mA Must Turn On Current 10 mA Must Turn Off Current 1 mA Maximum Turn-On Time msec 1/2 cycle Maximum Turn-Off Time msec 1/2 cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(2) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC)(2) 10 Ohm Maximum Capacitance, Input/Output 8.0 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C Weight (typical) 0.15 oz. (4.3g) Encapsulation Thermally Conductive Epoxy 1) All parameters at 25C unless otherwise noted. 2) 2) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Voltage Applied for 1 minute. ObsoleteMECHANICAL SPECIFICATIONS DC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 120810 Obsolete