DATA SHEET SKY65095-360LF: 1600 to 2100 MHz Low-Noise Power Amplifier Driver Applications 2.5G, 3G, 4G wireless infrastructure transceivers ISM band transmitters Active Bias WCS fixed wireless 3GPP LTE RF IN RF OUT/BIAS Features Wideband frequency range: 1600 to 2100 MHz GND Low noise figure: 4.5 dB ENABLE S1964a High IIP3 up to +32 dBm Figure 1. SKY65095-360LF Functional Block Diagram Output P1dB = +28.5 dBm High gain: +14.5 dBm Description Single DC supply: +5 V The Skyworks SKY65095-360LF is a high-performance, Enable voltage: +3.3 V ultra-wideband power amplifier (PA) driver with superior output On-chip bias circuit power, low noise, and linearity. The device provides excellent noise figure (NF) and high output power at 1 dB compression, DFN (8-pin, 2 x 2 mm) package which makes the SKY65095-360LF ideal for use in the driver (MSL1, 260 C per JEDEC J-STD-020) stage of infrastructure transmit or receive chains. The SKY65095-360LF uses low-cost surface-mount technology TM (SMT) in the form of an 8-pin, 2 x 2 mm Dual Flat No-Lead (DFN) Skyworks Green products are compliant with package. A functional block diagram is provided in Figure 1, and all applicable legislation and are halogen-free. the device package and pinout are shown in Figure 2. Signal pin For additional information, refer to Skyworks TM assignments and functional pin descriptions are described in Denition of Green , document number Table 1. SQ040074. 1 GND 8 N/U 2 7 RF IN RF OUT/BIAS 3 6 N/U ENABLE 4 5 N/U N/U S2494 Figure 2. SKY65095-360LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201569D Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 13, 2017 1 DATA SHEET SKY65095-360LF: 1600 TO 2100 MHz LOW-NOISE POWER AMPLIFIER DRIVER Table 1. SKY65095-360LF Signal Descriptions Pin Name Description Pin Name Description 1 GND Ground 5 N/U Not used (may be grounded) 2 RF IN RF input 6 ENABLE PA enable 3 N/U Not used (may be grounded) 7 RF OUT/BIAS RF output/bias voltage 4 N/U Not used (may be grounded) 8 N/U Not used (may be grounded) Technical Description Electrical and Mechanical Specifications The SKY65095-360LF is a single-stage, low-noise PA that The absolute maximum ratings of the SKY65095-360LF are operates with a single 5 V power supply connected through an RF provided in Table 2. The recommended operating conditions are choke (inductor L1) to the output signal (pin 7). The bias current is specified in Table 3 and electrical specifications are provided in set by the on-chip active bias composed of current mirror and Table 4 (general specifications), Table 5 (1626 to 1660 MHz), reference voltage transistors, which allow excellent gain tracking Table 6 (1710 to 1780 MHz), Table 7 (1850 to 1910 MHz), Table 8 over temperature and voltage variations. The device is externally (1920 to 1980 MHz), and Table 9 (2010 to 2025 MHz). RF matched using surface-mount components to facilitate Typical performance characteristics of the SKY65095-360LF are operation over a frequency range of 1600 to 2100 MHz. illustrated in Figures 3 through 13 (1626 to 1660 MHz), Figures 14 through 24 (1710 to 1785 MHz), Figures 25 through 44 (1850 to 1910 MHz), Figures 45 through 55 (1920 to 1980 MHz), and Figures 56 through 66 (2010 to 2025 MHz). 1 Table 2. SKY65095-360LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Supply voltage VCC 0.3 +6.0 V RF input power PIN +20 dBm Supply current P1dB ICC 400 mA Power dissipation P1dB PD 1.1 W Power dissipation PIN = 10 dBm PD 0.7 W Operating case temperature TC 0 +70 C Extended operating temperature TEXT 33 +95 C Storage temperature TST 55 +150 C Junction temperature PIN = 10 dBm TJ +150 C Thermal resistance PIN = 10 dBm JC 35 C/W 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 September 13, 2017 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201569D