RMC F/RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
Resistive Product Solutions
and High Power Chip Resistor
RMCF standard power ratings
Features:
RMCP high power ratings
Nickel barrier terminations standard
Power derating from 100% at 70C to zero at +155C
RMCF package sizes 0402 through 2512 are qualified to
AEC-Q200
RoHS compliant
Electrical Specifications
(2)
Maximum Resistance
Ohmic Range () and Tolerance
Power Rating Maximum
Maximum
Type / Code Working Temperature
(Watts) @ 70C Overload Voltage Current
(1)
1% 5%
Voltage Coefficient
-200/+600 ppm/C 1 - 9.76
RMCF01005 0.03W 15V 30V 0.5 Amp
250 ppm/C
10 - 1M
400 ppm/C 1 - 9.76
RMCF0201 0.05W 25V 50V 1 Amp
200 ppm/C 10 - 10M
300 ppm/C 0.2 - 0.59
200 ppm/C 0.604 - 9.76
RMCF0402 0.063W 50V 100V 1 Amp
100 ppm/C 10 - 1M
200 ppm/C 1.02M - 10M 1.1M - 20M
600 ppm/C 0.1 - 0.976
200 ppm/C 1 - 9.76 1 - 20M
RMCF0603 0.1W 75V 150V 1 Amp
100 ppm/C 10 - 1M -
200 ppm/C 1.02M - 10M -
200 ppm/C 1 - 9.76 1 - 20M
RMCF0805 0.125W 150V 300V 2 Amp 100 ppm/C 10 - 1M -
200 ppm/C 1.02M - 10M -
200 ppm/C 1 - 9.76 1 - 20M
RMCF1206 0.25W 200V 400V 2 Amp 100 ppm/C 10 - 1M -
200 ppm/C 1.02M - 10M -
200 ppm/C 0.1 - 0.976
(3)
400 ppm/C 1 - 9.76
RMCF1210 0.33W 200V 400V 3 Amp
200 ppm/C - 10 - 20M
100 ppm/C 10 - 10M -
200 ppm/C 0.1 - 0.976
400 ppm/C 1 - 9.76
RMCF2010 0.75W 200V 400V 3 Amp
200 ppm/C - 10 - 10M
100 ppm/C 10 - 10M -
200 ppm/C 0.1 - 0.976
400 ppm/C 1 - 9.76
RMCF2512 1W 200V 400V 3 Amp
200 ppm/C - 10 - 10M
100 ppm/C
10 - 10M -
RMCP0402 0.125W 50V 100V 1 Amp
RMCP0603 0.25W 75V 150V 1 Amp
RMCP0805 0.33W 150V 300V 2 Amp
200 ppm/C 1 - 9.76
RMCP1206 0.33W 200V 400V 2 Amp
100 ppm/C 10 - 1M
RMCP1210 0.5W 200V 400V 3 Amp
RMCP2010 1W 200V 400V 3 Amp
RMCP2512 2W 250V 500V 3 Amp
Notes: (1) Lesser of PR or maximum working voltage.
(2) Contact factory for extended ohmic values.
(3) Power rating is 0.5W for ohmic values below 1K
Rev Date: 09/11/2015 1 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RMC F/RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
Resistive Product Solutions
and High Power Chip Resistor
Mechanical Specifications
Average Unit L W H a b
Type / Code Unit
Weight (mg) Body Length Body Width Body Height Top Termination Bottom
0.016 0.001 0.008 0.001 0.005 0.001 0.004 0.001 0.004 0.001 inches
RMCF01005 0.07
0.40 0.02 0.20 0.02 0.13 0.02 0.10 0.03 0.10 0.03 mm
0.024 0.001 0.012 0.001 0.009 0.0004 0.006 0.002 0.006 0.002 inches
RMCF0201 0.16
0.60 0.03 0.30 0.03 0.23 0.01 0.15 0.05 0.15 0.05 mm
RMCF0402 0.57
0.039 0.004 0.020 0.002 0.012 0.004 0.008 0.004 0.010 0.006 inches
RMCP0402 0.62 1.00 0.10 0.50 0.05 0.30 0.10 0.20 0.10 0.25 0.15 mm
RMCF0603 1.88 0.061 0.006 0.031 + 0.006 0.018 0.004 0.012 0.008 0.012 0.008 inches
1.55 0.15 0.80 + 0.15 0.45 0.10 0.30 0.20 0.30 0.20 mm
RMCP0603 2.04
RMCF0805 5.00
0.079 0.008 0.049 0.004 0.020 0.006 0.014 0.010 0.014 0.010 inches
RMCP0805 4.37 2.00 0.20 1.25 0.10 0.50 0.15 0.35 0.25 0.35 0.25 mm
RMCF1206 8.86 0.126 0.010 0.063 0.006 0.022 0.006 0.020 0.012 0.020 0.012 inches
3.20 0.25 1.60 0.15 0.55 0.15 0.50 0.30 0.50 0.30 mm
RMCP1206 8.95
RMCF1210 15.55 0.126 0.010 0.098 0.010 0.022 0.006 0.020 0.012 0.020 0.012 inches
RMCP1210 15.96 3.20 0.25 2.50 0.25 0.55 0.15 0.50 0.30 0.50 0.30 mm
RMCF2010 23.56
0.197 0.008 0.098 0.008 0.022 0.006 0.024 0.012 0.024 0.014 inches
RMCP2010 24.24 5.00 0.20 2.50 0.20 0.55 0.15 0.60 0.30 0.60 0.35 mm
RMCF2512 40.02 0.248 0.008 0.126 0.010 0.022 0.006 0.024 0.012 0.024 0.014 inches
6.30 0.20 3.20 0.25 0.55 0.15 0.60 0.30 0.60 0.35 mm
RMCP2512 39.45
Performance Characteristics
Test Test Conditions (JIS C 5202) Test Results
Short Time Overload 2.5x rated voltage for 5 seconds (2% + 0.1)
Dielectric Withstanding Voltage 100 VAC, 1 minute (1% + 0.05)
Resistance to Soldering Heat 260C 5C, for 10 sec. 0.5 sec. (Solder Bath) 1%
Solderability 235C 5C, for 2 sec. 0.5 sec. (Colophonium flux) 95% coverage, minimum
-65C: 30 min. 25C: 2 to 3 min. (1% + 0.05)
Temperature Cycle 155C: 30 min. 25C: 2 to 3 min. Jumper (<0.05)
(5 Cycles)
40C 2C, 90% RH, Rated Load (3% + 0.1)
Endurance (Damp load)
90 min. On, 30 min. Off for 1,000 hrs. -0hrs./+48hrs. Jumper (<0.05)
70C 2C, Rated Load (3% + 0.1)
Endurance (Rated load)
90 min. On, 30 min. Off for 1,000 hrs. -0hrs./+48hrs. Jumper (<0.05)
Voltage Coefficient 1/10 rated voltage for 3 sec. max. then rated voltage for 3 sec. max. 100 (ppm/V)
Robustness of Termination Bend of 3mm for 5 1 sec. (1% + 0.05 Ohm)
Operating Temperature Range: -55C to +125C (0201 size)
-55C to +155C (all others)
Rev Date: 09/11/2015 2 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.