DIP24-1A72-13L Standexmeder

Europe: +49 / 7731 8399 0 Email: info meder.com Item No.: USA: +1 / 508 295 0771 Email: salesusa meder.com 3224100013 Asia: +852 / 2955 1682 Email: salesasia meder.com Item: DIP24-1A72-13L Coil Data at 20 C Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Coil current Thermal resistance = operating temperature + self heating Inductance Pull-In voltage Drop-Out voltage Contact data 66/3 Conditions Min Typ Max Unit % & Contact rating not to exceed their individual max. s Switching voltage DC or Peak AC Switching current DC or Peak AC Carry current DC or Peak AC ( ) * + ,- * - Contact resistance static Start Value Insulation resistance RH <45 %, 100 V test voltage . Breakdown voltage ( > 20 AT ) according to IEC 255-5 / Operate time incl. bounce measured with 40% overdrive ) Release time measured with no coil excitation ) Capacity 10 kHz across open switch 0 Special Product Data Conditions Min Typ Max Unit Number of contacts 1 Contact - form A - NO Dielectric Strength Coil/Contact according to IEC 255-5 / Insulation resistance Coil/Contact RH <45%, 200 VDC test voltage . Capacity Coil/Contact 10 kHz 0 Case colour black Housing material epoxy resin Connection pins CuFe2P tin plated Magnetic Shield no Reach / RoHS conformity yes Approval NRNT2.E156887 Approval NRNT8.E156887 Modifications in the sense of technical progress are reserved Designed at: 23.04.04 Designed by: SCHELLHORN Approval at: 05.11.09 Approval by: KOLBRICH Last Change at: 23.04.04 Last Change by: SCHELLHORN Approval at: Approval by: Version: 01Europe: +49 / 7731 8399 0 Email: info meder.com Item No.: USA: +1 / 508 295 0771 Email: salesusa meder.com 3224100013 Asia: +852 / 2955 1682 Email: salesasia meder.com Item: DIP24-1A72-13L Environmental data Conditions Min Typ Max Unit Shock 1/2 sine wave duration 11ms 1 Vibration from 10 - 2000 Hz 1 Operating temperature 4 3 2 Storage temperature 4 5 2 Soldering temperature wave soldering max. 5 sec. 2 Washability fully sealed General data Conditions Min Typ Max Unit Total weigth 1 Packaging Tube per 25 piece Modifications in the sense of technical progress are reserved Designed at: 23.04.04 Designed by: SCHELLHORN Approval at: 05.11.09 Approval by: KOLBRICH Last Change at: 23.04.04 Last Change by: SCHELLHORN Approval at: Approval by: Version: 01