Caution This apparatus must be grounded. The supplied power www.mcmelectronics.com cord provides necessary ground and should not be modifed in any way. When connecting to AC power source Do not defeat this ground connection. 1x8 DMX Splitter Do not apply power source before all equipment is installed Model DMX-SPLIT8 and completely connected. Always disconnect from power source before replacing the fuse. To reduce risk of fire or electric shock, do not expose this device to rain or excessive moisture. There are no user servicable parts inside. Refer all service only to qualified service personnel. User Manual Thank you for selecting the product. For safety reasons, please read this manual completely prior to operation. This manual provides useful safety and operation information and will ensure maximum benefit from this product. WARRANTY This product is warranted for a period of ONE YEAR from the original date of purchase. This warranty is limited to the device and does not extend beyond the that. In the event that warranty service or replacment is required, please contact your Stellar Labs dealer. Item 555-20220Item 555-20220 VVeerrssiioonn::11..00 3300 DDeecc 22001122 User Manual 3/32 1 DMX DISTRIBUTOR DMX Output 3-PIN XLR Female Congratulations on your purchase of this high quality 1x8 Pin1: Shield (ground) Connector pin designation is as follows: Pin2: Data (-) DMX distribution amplifier. This unit features a single 3-Pin Pin3: Data (+) Pin1: Signal shield XLR-M DMX input, and eight XLR-F DMX outputs, each with 3 Pin2: Data Invert (-) complement independent drivers, providing full isolation from the input 1 2 Pin3: Data (+) and other outputs. In the event that a fault occurs on one DMX Input DMX output, the others will remain operational. Each output 3-PIN XLR Male Pin1: Shield (ground) provides LED data indicators, providing full confirmation of Pin2: Data (-) proper operation. A feed through XLR-F connector is provided Pin3: Data (+) 3 at the input, allowing this unit to be placed in the middle of an existing DMX chain, and up to eight DMX splitters may be used together for further expansion. Connection diagram: Lighting Lighting 1.Specifications DMX Controller IN Power input ............................... AC100V~240V /50~60Hz OUT 1 Fuse(internal) .................................... 0.9A 250V PTC OUT IN Dimensions ........................................ 317 x 150 x 75mm OUT 2 Weight ................................................................ 1.6 KG dmx distributor IN Lighting Lighting 2.Operating instruction and connection With unit connected from DMX controller, up to 32 devices can be connected to each output. 8-Way Isolated Distributor AC 100~240V 50~60Hz INTERNAL FINTERNAL FUSE: 0.9AUSE: 0.9A 250V PTC 250V PTC Lighting Lighting CAUTION DMX Controller IN OUT IN WARWARNINNING: TG: Thishis D Devevicice Me Muust bst bee Gr Grooununddeded DC OUT 1 DC O U T OUT IN IN OUT IN DC IN OUT 2 OUT DC Lighting Lighting dmx distributor IN Lighting Lighting The input of this splitter may be one of up to 32 devices connected to a single controller, including seven additional 1 2 3 4 5 6 7 8 splitters, and each splitter may have up to 32 connected devices. User Manual 1/3 User Manual 2/3