THICK FILM CHIP RESISTORS
Type CRG Series
Key Features
Thick Film
Resistors with
high power to
size ratio,
ideally suited
to industrial
and general
purpose use
Value range
from to
M
Eight package
sizes
Terminal finish
matte Sn over
Ni
The resistive element is screen printed and fired, and a passivation layer added.
Each resistor is trimmed to tolerance by laser. The pre-scribed tile is then broken
into strips, the end plating fired on, and the strips broken into individual
components. Final termination finish is electroplated matte Sn over a Ni barrier
layer.
Electrical Characteristics
Type 0201 0402 0603 0805 1206 1210 2010 2512
Power rating (W) 0.05 0.0625 0.1 0.125 0.25 0.5 0.75W 1W
Resistance Min 1R0 1R0 1R0 1R0 1R0 1R0 1R0 1R0
rage Max 10M 10M 10M 10M 10M 10M 10M 10M
Tolerance (%) 1 1 1 1 1 1 1 1
Code Letter F F F F F F F F
Max Working Voltage 25V 50V 75V 150V 200V 200V 200V 200V
Max Overload Voltage 50V 100V 150V 300V 400V 500V 500V 500V
Dielectric Strength (V) - 100V 300V 500V 500V 500V 500V 500V
Rated current (Jumper) (A)0.5A 1A 1A 2A 2A 2A 2A 2A
Max Overload Current (A)
1A 2A 2A 5A 10A 10A 10A 10A
(Jumper)
Temperature Range -55C ~ 155C
Power rating:
Resistors shall have a power rating based on continuous load operation at an ambient
temperature of 70 . For temperature in excess of 70 , The load shall be derate as
shown below
Dimensions in Dimensions Shown for
1773204 Rev J 12/2018
For Email, phone or live chat,
millimetres unless reference purposes only.
go to: www.te.com/help
otherwise specified Specifications subject to
change
THICK FILM CHIP RESISTORS
Derating Chart
Constuction
Dimensions:
Dimensions (mm)
Type
L W H l 1 l 2
0201 0.600.03 0.300.03 0.230.03 0.100.05 0.150.05
0402 1.000.10 0.500.05 0.350.05 0.200.10 0.250.10
0603 1.600.10 0.80+0.15 0.450.10 0.300.20 0.300.20
-0.10
0805 2.000.15 1.25+0.15 0.550.10 0.400.20 0.400.20
-0.10
1206 3.100.15 1.55+0.15 0.550.10 0.450.20 0.450.20
-0.10
1210 3.100.10 2.600.15 0.550.10 0.500.25 0.500.20
2010 5.000.10 2.500.15 0.550.10 0.600.25 0.500.20
2512 6.350.10 3.200.15 0.550.10 0.600.25 0.500.20
Dimensions in Dimensions Shown for
1773204 Rev J 12/2018
For Email, phone or live chat,
millimetres unless reference purposes only.
go to: www.te.com/help
otherwise specified Specifications subject to
change