20 dB near field amp for Tektronix EMC pre- compliance EMI-NF-AMP (TEKBOX TBWA2 offered by Tektronix) The EMI-NF-AMP is the TEKBOX TBWA2. This 20 dB wideband amplifier is for radiated emissions EMC pre-compliance measurements. This amplifier can be used with the EMI-NF-PROBE probes to increase the dynamic range of the measurements. Key features Wideband amplifier with 20 dB gain Works with EMI-NF-PROBE (TEKBOX TBPS01) magnetic field and electric field probes Applications Radiated EMC measurement RF immunity testing Contactless (load free) relative measurement of RF signal chains Contactless (load free) relative measurement of oscillators, modulators, etc. www.tek.com 1Datasheet Specifications Near field amplifier Input 50 , SMA Output 50 , SMA Nominal supply voltage 4.5 5 V, typical. 110 mA, Mini-USB-B connector Maximum supply voltage 5.5 V Maximum input power + 10 dBm 1 dB output compression +20 dBm point at 2 GHz 3rd order output intercept Pin = 0 dBm/tone, f = 10 MHz: +35 dBm point at 2 GHz Reverse isolation S12, 0.1 23 dB 6 GHz Noise figure at 2 GHz 4.5 . 5 dB Gain 1 MHz 10 MHz 100 MHz 500 MHz 1 GHz 2 GHz 3 GHz 4.5 GHz 6 GHz 14.8 dB 20.2 dB 20.2 dB 20 dB 19.8 dB 19 dB 17.6 dB 17.4 dB 15.4 dB 2 www.tek.com